,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Single Column Drawing Press - Hydraulic

          Machinelist: Single Column Drawing Press - Hydraulic


          Drawing Press - 1-Col.Hydr.

          used Presses Drawing Press - 1-Col.Hydr. PME PHY 250 C


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233023V · Drawing Press - 1-Col.Hydr.

          PME - PHY 250 C - - 2007 - Siemens S 7

          Technical details
          pressure 250 t︱stroke 600 mm︱throat 360 mm︱dayligth 800 mm︱table surface area 1400 x 700 mm︱table height over floor 1030 mm︱ram surface 1100 X 600 mm︱feed down 300 mm/s︱feed up 480 mm/s︱working feed 69 mm/s︱oil volume l︱power requirement 55,0 kW︱Weight 11,0 t︱dimensions of the machine ca. 2,2 x 3,2 x 3,4 m︱
          permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on way, light-guard (Sick) on front new, two-hand operation
            pressure 250 t
            stroke 600 mm
            throat 360 mm
            dayligth 800 mm
            table surface area 1400 x 700 mm
            table height over floor 1030 mm
            ram surface 1100 X 600 mm
            feed down 300 mm/s
            feed up 480 mm/s
            working feed 69 mm/s
            power requirement 55,0 kW
            Weight 11,0 t
            dimensions of the machine ca. 2,2 x 3,2 x 3,4 m
            Description :
            permitted for manual loading according to the CE-norm
            with oil-hydraulic drive, controllable dependent on way, light-guard (Sick) on front new, two-hand operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Drawing Press - 1-Col.Hydr. MUELLER CEZ 63.5.10 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-133027 · Drawing Press - 1-Col.Hydr.

          MUELLER - CEZ 63.5.10 (UVV) - - 1991 - konventionell

          Technical details
          pressure 63 t︱throat 325 mm︱stroke 560 mm︱dayligth 700 mm︱table surface area 640 x 640 mm︱die cushion capacity 25 t︱die cushion stroke 200 mm︱die cushion area 450 x 450 mm︱table height over floor 800 mm︱ram surface 560 x 560 mm︱oil volume 450 l︱total power requirement 15,0 kW︱weight of the machine ca. 7,0 t︱required space 1,2 x 2,0 x 3,1 m︱
          year of manufacture 1971 overhaul 1991 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, two-hand operation press can be inspected in running condition in our warehouse
            pressure 63 t
            throat 325 mm
            stroke 560 mm
            dayligth 700 mm
            table surface area 640 x 640 mm
            die cushion capacity 25 t
            die cushion stroke 200 mm
            die cushion area 450 x 450 mm
            table height over floor 800 mm
            ram surface 560 x 560 mm
            oil volume 450 l
            total power requirement 15,0 kW
            weight of the machine ca. 7,0 t
            required space 1,2 x 2,0 x 3,1 m
            Description :
            year of manufacture 1971
            overhaul 1991
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, hydraulic drawing cushion in table, two-hand operation
            press can be inspected in running condition in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Drawing Press - 1-Col.Hydr. LAUFFER EZU 100 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-103057 · Drawing Press - 1-Col.Hydr.

          LAUFFER - EZU 100 (UVV) - - 1989 - konventionell

          Technical details
          pressure 100 t︱stroke 560 mm︱throat 540 mm︱dayligth 800 mm︱table surface area 1000 x 1000 mm︱die cushion capacity 50 t︱die cushion stroke 200 mm︱die cushion area 710 x 650 mm︱table height over floor 910 mm︱ram surface 1000 x 1000 mm︱feed down 400 mm/s︱feed up 300 mm/s︱working feed 57,7 mm/s︱oil volume 650 l︱power requirement 37,5 kW︱Weight 15,0 t︱dimensions of the machine ca. 1,5 x 2,5 x 4,45 mxmxm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, ejector in ram (2 t / 200 mm), cutting impact cushioning, mechanical depth stop, two-hand operation
            pressure 100 t
            stroke 560 mm
            throat 540 mm
            dayligth 800 mm
            table surface area 1000 x 1000 mm
            die cushion capacity 50 t
            die cushion stroke 200 mm
            die cushion area 710 x 650 mm
            table height over floor 910 mm
            ram surface 1000 x 1000 mm
            feed down 400 mm/s
            feed up 300 mm/s
            working feed 57,7 mm/s
            oil volume 650 l
            power requirement 37,5 kW
            Weight 15,0 t
            dimensions of the machine ca. 1,5 x 2,5 x 4,45 mxmxm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, ejector in ram (2 t / 200 mm), cutting impact cushioning, mechanical depth stop, two-hand operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Drawing Press - 1-Col.Hydr. DUNKES HZS 250


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0024 · Drawing Press - 1-Col.Hydr.

          DUNKES - HZS 250 - - 1989 -

          Technical details
          Press capacity 250 t︱Throat depth 430 mm︱Stroke 300 mm︱Daylight 500 mm︱Table surface area 1.100 x 850 mm︱Approach speed 330 mm / s︱Working speed 11 - 30 mm / s︱Return speed 330 mm / s︱Die cushion capacity in table 80 t︱Die cushion stroke 100 mm︱Ejector in ram 5 t︱Ejector stroke in ram 75 mm︱Oil volume 1.400 l︱Dimensions L x W x H 3.200 x 2.500 x 4.250 mm︱Weight of machine approx. 32 t︱
            Press capacity 250 t
            Throat depth 430 mm
            Stroke 300 mm
            Daylight 500 mm
            Table surface area 1.100 x 850 mm
            Approach speed 330 mm / s
            Working speed 11 - 30 mm / s
            Return speed 330 mm / s
            Die cushion capacity in table 80 t
            Die cushion stroke 100 mm
            Ejector in ram 5 t
            Ejector stroke in ram 75 mm
            Oil volume 1.400 l
            Dimensions L x W x H 3.200 x 2.500 x 4.250 mm
            Weight of machine approx. 32 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Drawing Press - 1-Col.Hydr. SMG CSZ 63


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113030 · Drawing Press - 1-Col.Hydr.

          SMG - CSZ 63 - - 1979 - konventionell

          Technical details
          pressure 63 t︱stroke 200 mm︱throat 320 mm︱dayligth 450 mm︱table surface area 750 x 600 mm︱die cushion capacity 6,5 t︱die cushion stroke 80 mm︱die cushion area 240 mm︱table height over floor 800 mm︱ram surface 500 x 450 mm︱feed down 300 mm/s︱feed up 300 mm/s︱working feed 50 mm/s︱oil volume 380 l︱power requirement 12,0 kW︱Weight 6,5 t︱dimensions of the machine ca. 1,3 x 2,0 x 2,75 mxmxm︱
          with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram (approx. 0,5 t / 70 mm), hydraulic cutting impact cushioning, mechanical depth stop
            pressure 63 t
            stroke 200 mm
            throat 320 mm
            dayligth 450 mm
            table surface area 750 x 600 mm
            die cushion capacity 6,5 t
            die cushion stroke 80 mm
            die cushion area 240 mm
            table height over floor 800 mm
            ram surface 500 x 450 mm
            feed down 300 mm/s
            feed up 300 mm/s
            working feed 50 mm/s
            oil volume 380 l
            power requirement 12,0 kW
            Weight 6,5 t
            dimensions of the machine ca. 1,3 x 2,0 x 2,75 mxmxm
            Description :
            with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram (approx. 0,5 t / 70 mm), hydraulic cutting impact cushioning, mechanical depth stop


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Drawing Press - 1-Col.Hydr. SMG CS 100 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183027 · Drawing Press - 1-Col.Hydr.

          SMG - CS 100 (UVV) - - 1978 - konventionell

          Technical details
          pressure 100 t︱stroke 150 mm︱throat 345 mm︱dayligth 400 mm︱table surface area 1200 x 600 mm︱table height over floor 850 mm︱ram surface 560 x 500 mm︱feed down 350 mm/s︱feed up 350 mm/s︱working feed 25 mm/s︱oil volume 560 l︱power requirement 22,0 kW︱Weight 8,3 t︱dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, mechanical depth stop
            pressure 100 t
            stroke 150 mm
            throat 345 mm
            dayligth 400 mm
            table surface area 1200 x 600 mm
            table height over floor 850 mm
            ram surface 560 x 500 mm
            feed down 350 mm/s
            feed up 350 mm/s
            working feed 25 mm/s
            oil volume 560 l
            power requirement 22,0 kW
            Weight 8,3 t
            dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, mechanical depth stop


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Drawing Press - 1-Col.Hydr. MUELLER CEZ 200.2.1


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-063212 · Drawing Press - 1-Col.Hydr.

          MUELLER - CEZ 200.2.1 - - 1977 - konventionell

          Technical details
          pressure 200 t︱stroke 560 mm︱throat 360 mm︱dayligth 780 mm︱table surface area 740 x 720 mm︱die cushion capacity 80 t︱die cushion stroke 200 mm︱die cushion area 530 x 530 mm︱table height over floor 920 mm︱ram surface 560 x 560 mm︱oil volume l︱power requirement 35,0 kW︱Weight 10,0 t︱dimensions of the machine ca. 1,3 x 2,0 x 3,4 mxmxm︱
          permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table
            pressure 200 t
            stroke 560 mm
            throat 360 mm
            dayligth 780 mm
            table surface area 740 x 720 mm
            die cushion capacity 80 t
            die cushion stroke 200 mm
            die cushion area 530 x 530 mm
            table height over floor 920 mm
            ram surface 560 x 560 mm
            power requirement 35,0 kW
            Weight 10,0 t
            dimensions of the machine ca. 1,3 x 2,0 x 3,4 mxmxm
            Description :
            permitted for manual loading according to the German Safety Regulations (UVV)
            with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          Eccentric Press - Single Column

          used Presses Eccentric Press - Single Column HELMERDING ERVL 50 B


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-943 · Eccentric Press - Single Column

          HELMERDING - ERVL 50 B - - überholt 2023/24 -

          Technical details
          pressure 50 t︱throat 245 mm︱stroke 14 / 90 mm︱ram adjustment 75 mm︱table height adjustment 150 mm︱strokes per minute 42/85 ︱table surface area 700 x 490 mm︱ram surface 400 x 230 mm︱tool hole in ram 40 mm︱total power requirement 4 kW︱weight of the machine ca. 3,41 t︱dimensions of the machine ca. 0,8 x 1,75 x 2,1 m︱
          Machine is partially overhauled in our house as follows: - Cleaning and inspection - new control cabinet with safety control and touchscreen display - new 2-hand control panel - Current UVV test with braking time measurement - Machine safe for hand inlay work
            pressure 50 t
            throat 245 mm
            stroke 14 / 90 mm
            ram adjustment 75 mm
            table height adjustment 150 mm
            strokes per minute 42/85
            table surface area 700 x 490 mm
            ram surface 400 x 230 mm
            tool hole in ram 40 mm
            total power requirement 4 kW
            weight of the machine ca. 3,41 t
            dimensions of the machine ca. 0,8 x 1,75 x 2,1 m
            Description :
            Machine is partially overhauled in our house as follows:
            - Cleaning and inspection
            - new control cabinet with safety control and touchscreen display
            - new 2-hand control panel
            - Current UVV test with braking time measurement
            - Machine safe for hand inlay work


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column WEINGARTEN ARP 80


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-872 · Eccentric Press - Single Column

          WEINGARTEN - ARP 80 - - überholt 2023/24 -

          Technical details
          pressure 80 t︱throat 320 mm︱stroke 8 - 112 mm︱table surface area 830 x 600 mm︱no. of strokes 30 - 85 Hub/min︱ram surface 650 x 400 mm︱ram adjustment 71 mm︱clamping plate 990 x 550 mm︱table height over floor 810 mm︱table height over floor 800 mm︱column daylight (vorn) 680 mm︱column daylight (hinten) 520 mm︱total power requirement 7,5 kW︱weight of the machine ca. 7,7 t︱dimensions of the machine ca. 1,5 x 2,2 x 3,15 m︱
          Equipment: - with wheel presentation - fixed table - with roller feed, make PRESSMAC, type MAC 380 P, belt width 300 mm The machine should be partially overhauled - Complete disassembly and review - new coloring - new control cabinet with PLC and touchscreen including cabling.
            pressure 80 t
            throat 320 mm
            stroke 8 - 112 mm
            table surface area 830 x 600 mm
            no. of strokes 30 - 85 Hub/min
            ram surface 650 x 400 mm
            ram adjustment 71 mm
            clamping plate 990 x 550 mm
            table height over floor 810 mm
            table height over floor 800 mm
            column daylight (vorn) 680 mm
            column daylight (hinten) 520 mm
            total power requirement 7,5 kW
            weight of the machine ca. 7,7 t
            dimensions of the machine ca. 1,5 x 2,2 x 3,15 m
            Description :
            Equipment:
            - with wheel presentation
            - fixed table
            - with roller feed, make PRESSMAC, type MAC 380 P, belt width 300 mm

            The machine should be partially overhauled
            - Complete disassembly and review
            - new coloring
            - new control cabinet with PLC and touchscreen including cabling.



        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column ERFURT PEE I 400


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-970 · Eccentric Press - Single Column

          ERFURT - PEE I 400 - - unbekannt -

          Technical details
          pressure 400 t︱throat 400 mm︱stroke 40 - 140 mm︱number of strokes - idle run 32 min-1︱ram adjustment 125 mm︱table surface area 1250 x 750 mm︱dayligth min/max 450/590 mm︱total power requirement 31,5 kW︱weight of the machine ca. 23 t︱Overall size 3,7 x 1,7 x 3,9 mm︱
            pressure 400 t
            throat 400 mm
            stroke 40 - 140 mm
            number of strokes - idle run 32 min-1
            ram adjustment 125 mm
            table surface area 1250 x 750 mm
            dayligth min/max 450/590 mm
            total power requirement 31,5 kW
            weight of the machine ca. 23 t
            Overall size 3,7 x 1,7 x 3,9 mm


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column ZEULENRODA PED 63/2


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-981 · Eccentric Press - Single Column

          ZEULENRODA - PED 63/2 - - unbekannt -

          Technical details
          pressure 63 t︱throat 315 mm︱stroke 16 - 125 mm︱max. distance table - ram 417 mm︱ram adjustment 70 mm︱no. of strokes 80 Hub/min︱table surface area 800 x 630 mm︱ram surface 500 x 400 mm︱total power requirement 6 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 1,5 x 2,2 x 2,75 m︱
            pressure 63 t
            throat 315 mm
            stroke 16 - 125 mm
            max. distance table - ram 417 mm
            ram adjustment 70 mm
            no. of strokes 80 Hub/min
            table surface area 800 x 630 mm
            ram surface 500 x 400 mm
            total power requirement 6 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 1,5 x 2,2 x 2,75 m


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column EBU 25


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-4929 · Eccentric Press - Single Column

          EBU - 25 - - unbekannt -

          Technical details
          pressure 25 t︱throat - mm︱stroke - mm︱total power requirement - kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2 x 2 x 2,4 m︱
            pressure 25 t
            throat - mm
            stroke - mm
            total power requirement - kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2 x 2 x 2,4 m


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column HEL - WITA ERN 125


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-1000 · Eccentric Press - Single Column

          HEL - WITA - ERN 125 - - NEU -

          Technical details
          pressure 125 t︱throat 360 mm︱stroke 20 - 130 mm︱table surface area 920 x 690 mm︱ram surface 580 x 400 mm︱no. of strokes 60 Hub/min︱ram adjustment 80 mm︱hole in the table 200 mm︱tool hole in ram 50 mm︱daylight (stroke down, ram adjustment above) 500 mm︱total power requirement 11 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. B 1,32 x T 1,8 x H 2,82 m︱
            pressure 125 t
            throat 360 mm
            stroke 20 - 130 mm
            table surface area 920 x 690 mm
            ram surface 580 x 400 mm
            no. of strokes 60 Hub/min
            ram adjustment 80 mm
            hole in the table 200 mm
            tool hole in ram 50 mm
            daylight (stroke down, ram adjus. 500 mm
            total power requirement 11 kW
            weight of the machine ca. 7,5 t
            dimensions of the machine ca. B 1,32 x T 1,8 x H 2,82 m


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column AMBOLD PEEV 55.4


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-287 · Eccentric Press - Single Column

          AMBOLD - PEEV 55.4 - - Neu -

          Technical details
          pressure 55 t︱throat 250 mm︱stroke 10-90 mm︱table-size 640 x 495 mm︱no. of strokes 120 Hub/min︱ram adjustment 55 mm︱ram surface 290 x 210 mm︱ram hole 40 H7 mm︱hole in the table 220 x 190 mm︱T-slots 22 ︱clamping plate 620 x 485 x 65 mm︱total power requirement 4,5 kW︱weight of the machine ca. 3,4 t︱dimensions of the machine ca. 1,5 x 1,2 x 2,2 m︱
            pressure 55 t
            throat 250 mm
            stroke 10-90 mm
            table-size 640 x 495 mm
            no. of strokes 120 Hub/min
            ram adjustment 55 mm
            ram surface 290 x 210 mm
            ram hole 40 H7 mm
            hole in the table 220 x 190 mm
            T-slots 22
            clamping plate 620 x 485 x 65 mm
            total power requirement 4,5 kW
            weight of the machine ca. 3,4 t
            dimensions of the machine ca. 1,5 x 1,2 x 2,2 m


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column AMBOLD PEEV 55.3


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-286 · Eccentric Press - Single Column

          AMBOLD - PEEV 55.3 - - Neu -

          Technical details
          pressure 55 t︱throat 250 mm︱stroke 10-90 mm︱table-size 640 x 495 mm︱no. of strokes 120 Hub/min︱ram adjustment 55 mm︱ram surface 290 x 210 mm︱ram hole 40 H7 mm︱hole in the table 220 x 190 mm︱T-slots 22 ︱clamping plate 620 x 485 x 65 mm︱total power requirement 4,5 kW︱weight of the machine ca. 3,4 t︱dimensions of the machine ca. 1,5 x 1,2 x 2,2 m︱
            pressure 55 t
            throat 250 mm
            stroke 10-90 mm
            table-size 640 x 495 mm
            no. of strokes 120 Hub/min
            ram adjustment 55 mm
            ram surface 290 x 210 mm
            ram hole 40 H7 mm
            hole in the table 220 x 190 mm
            T-slots 22
            clamping plate 620 x 485 x 65 mm
            total power requirement 4,5 kW
            weight of the machine ca. 3,4 t
            dimensions of the machine ca. 1,5 x 1,2 x 2,2 m


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column AMBOLD PEEV 40.2


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-255 · Eccentric Press - Single Column

          AMBOLD - PEEV 40.2 - - GÜ 2024 -

          Technical details
          pressure 40 t︱throat 225 mm︱stroke 8 - 84 mm︱table surface area 580 x 450 mm︱ram adjustment 55 mm︱no. of strokes 130 Hub/min︱ram surface 185 x 180 mm︱ram hole 40 mm︱hole in the table 210 x 170 mm︱clamping plate 570 x 450 mm︱total power requirement 3,5 kW︱weight of the machine ca. 2,7 t︱dimensions of the machine ca. 1,4 x 1,1 x 2,1 m︱
          Single Column press with - pneumatic clutch - cam control Balluff - electrical cabinet with touchscreen control - arabic language on display and electrical cabinet - foot control - central lubrication - bolster plate
            pressure 40 t
            throat 225 mm
            stroke 8 - 84 mm
            table surface area 580 x 450 mm
            ram adjustment 55 mm
            no. of strokes 130 Hub/min
            ram surface 185 x 180 mm
            ram hole 40 mm
            hole in the table 210 x 170 mm
            clamping plate 570 x 450 mm
            total power requirement 3,5 kW
            weight of the machine ca. 2,7 t
            dimensions of the machine ca. 1,4 x 1,1 x 2,1 m
            Description :
            Single Column press with
            - pneumatic clutch
            - cam control Balluff
            - electrical cabinet with touchscreen control
            - arabic language on display and electrical cabinet
            - foot control
            - central lubrication
            - bolster plate


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column AMBOLD PEEV 25.2


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-251 · Eccentric Press - Single Column

          AMBOLD - PEEV 25.2 - - GÜ 2024 -

          Technical details
          pressure 25 t︱throat 200 mm︱stroke 4 - 80 mm︱table surface area 520 x 400 mm︱force Dauerlauf 1765 J ︱no. of strokes 160 Hub/min︱dayligth 302 max mm︱dayligth 100 min mm︱adjustment of stroke 8-84 mm︱ram adjustment 55 mm︱ram surface 185 x 180 mm︱ram hole 40 H7 mm︱force 3530 J ︱hole in the table 210 x 170 mm︱width of T-slots 22 mm︱connected load 3,5 kW︱rated current 9 ︱frequency 50 Hz︱voltage 380 V︱weight of the machine ca. 2700 kg︱
            pressure 25 t
            throat 200 mm
            stroke 4 - 80 mm
            table surface area 520 x 400 mm
            force Dauerlauf 1765 J
            no. of strokes 160 Hub/min
            dayligth 302 max mm
            dayligth 100 min mm
            adjustment of stroke 8-84 mm
            ram adjustment 55 mm
            ram surface 185 x 180 mm
            ram hole 40 H7 mm
            force 3530 J
            hole in the table 210 x 170 mm
            width of T-slots 22 mm
            connected load 3,5 kW
            rated current 9
            frequency 50 Hz
            voltage 380 V
            weight of the machine ca. 2700 kg


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column AMBOLD EERH 100


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-984 · Eccentric Press - Single Column

          AMBOLD - EERH 100 - - GÜ 2024 -

          Technical details
          pressure 100 t︱throat 350 mm︱stroke 20 - 120 mm︱table size 1100 x 700 mm︱ram head dimension 750 x 450 mm︱ram adjustment max. 90 mm︱no. of strokes 70 Hub/min︱strokes - infinitely variable 20 - 120 Hub/min︱daylight, max. stroke above - ram adjustment above 500 mm︱hole in the table 400 x 300 mm︱hole in bolster plate 220 x 180 mm︱Breakthrough in column back 450 x 300 mm︱total power requirement 11 kW︱weight of the machine ca. 11,8 t︱dimensions of the machine ca. 2,1 x 1,3 x 2,8 m︱
            pressure 100 t
            throat 350 mm
            stroke 20 - 120 mm
            table size 1100 x 700 mm
            ram head dimension 750 x 450 mm
            ram adjustment max. 90 mm
            no. of strokes 70 Hub/min
            strokes - infinitely variable 20 - 120 Hub/min
            daylight, max. stroke above - ra. 500 mm
            hole in the table 400 x 300 mm
            hole in bolster plate 220 x 180 mm
            Breakthrough in column back 450 x 300 mm
            total power requirement 11 kW
            weight of the machine ca. 11,8 t
            dimensions of the machine ca. 2,1 x 1,3 x 2,8 m


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column SCHULER PDR 200/450


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233008 · Eccentric Press - Single Column

          SCHULER - PDR 200/450 - - 2009 - Siemens S 7

          Technical details
          pressure 200 t︱stroke 30 - 140 mm︱no. of strokes 40 /min︱throat 450 mm︱passage to the back 425 mm︱dayligth 630 mm︱table surface area 1020 x 880 mm︱hole in the table 540 / 500 mm︱table height over floor 800 mm︱ram surface 800 x 500 mm︱ram adjustment 125 mm︱power requirement 15,0 kW︱Weight 13,8 t︱dimensions of the machine ca. 2,2 x 2,35 x 3,43 m x m x m︱
          year of manufacture 1970 2009: modernization of electrical control (Siemens S 7) and modification of clutch-brake combination Ortlinghaus permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, motoric centralized lubrication, two-hand operation
            pressure 200 t
            stroke 30 - 140 mm
            no. of strokes 40 /min
            throat 450 mm
            passage to the back 425 mm
            dayligth 630 mm
            table surface area 1020 x 880 mm
            hole in the table 540 / 500 mm
            table height over floor 800 mm
            ram surface 800 x 500 mm
            ram adjustment 125 mm
            power requirement 15,0 kW
            Weight 13,8 t
            dimensions of the machine ca. 2,2 x 2,35 x 3,43 m x m x m
            Description :
            year of manufacture 1970
            2009: modernization of electrical control (Siemens S 7) and modification of clutch-brake combination Ortlinghaus
            permitted for manual loading according to the German Safety Regulations (UVV)
            with motor, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, motoric centralized lubrication, two-hand operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column EBU H 80 RiV


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-963 · Eccentric Press - Single Column

          EBU - H 80 RiV - - 2008 -

          Technical details
          pressure 80 t︱throat 305 mm︱stroke 8 - 140 mm︱ram adjustment 100 mm︱no. of strokes 60 Hub/min︱table surface area 900 x 625 mm︱ram surface 600 x 280 mm︱daylight, max. stroke above - ram adjustment above 345 mm︱table height adjustment 240 mm︱ram hole Dm. 40 mm︱total power requirement 14 A︱weight of the machine ca. 7,6 t︱dimensions of the machine ca. BxTxH 1,38 x 2,1 x 2,56 m︱
          - hydraulic clutch - belt transmission - mechanical overload protection (breaking plate) - connecting rod clamping manually - ram height adjustment manually - stroke adjustment manually - OT correction manually - table height adjustment manually - automatic central lubrication, made by Beka - clamping plate Machine is technically checked in our company. - Current UVV test with braking time measurement
            pressure 80 t
            throat 305 mm
            stroke 8 - 140 mm
            ram adjustment 100 mm
            no. of strokes 60 Hub/min
            table surface area 900 x 625 mm
            ram surface 600 x 280 mm
            daylight, max. stroke above - ra. 345 mm
            table height adjustment 240 mm
            ram hole Dm. 40 mm
            total power requirement 14 A
            weight of the machine ca. 7,6 t
            dimensions of the machine ca. BxTxH 1,38 x 2,1 x 2,56 m
            Description :
            - hydraulic clutch
            - belt transmission
            - mechanical overload protection (breaking plate)
            - connecting rod clamping manually
            - ram height adjustment manually
            - stroke adjustment manually
            - OT correction manually
            - table height adjustment manually
            - automatic central lubrication, made by Beka
            - clamping plate

            Machine is technically checked in our company.

            - Current UVV test with braking time measurement


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column AMBOLD PEEV 55.3


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-910 · Eccentric Press - Single Column

          AMBOLD - PEEV 55.3 - - 2004 -

          Technical details
          pressure 55 t︱throat 250 mm︱stroke 10-90 mm︱table-size 640 x 495 mm︱no. of strokes 120 Hub/min︱ram adjustment 55 mm︱ram surface 195 x 210 mm︱ram hole 40 H7 mm︱hole in the table 250 x 190 mm︱T-slots 22 ︱clamping plate 620 x 485 x 65 mm︱total power requirement 4,5 kW︱weight of the machine ca. 3,4 t︱dimensions of the machine ca. 1,5 x 1,2 x 2,2 m︱
            pressure 55 t
            throat 250 mm
            stroke 10-90 mm
            table-size 640 x 495 mm
            no. of strokes 120 Hub/min
            ram adjustment 55 mm
            ram surface 195 x 210 mm
            ram hole 40 H7 mm
            hole in the table 250 x 190 mm
            T-slots 22
            clamping plate 620 x 485 x 65 mm
            total power requirement 4,5 kW
            weight of the machine ca. 3,4 t
            dimensions of the machine ca. 1,5 x 1,2 x 2,2 m


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column EBU H 40


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0456 · Eccentric Press - Single Column

          EBU - H 40 - - 2004 -

          Technical details
          Capacity 40 t︱Throat depth 225 mm︱Slide adjustment 85 mm︱Shut height (stroke down, adjustment up) 375 mm︱Table surface area 640 x 450 mm︱Number of strokes 130 min-1︱Dimensions L x W x H 1200 x 1680 x 2160 mm︱Weight of machine approx. 3,1 t︱
            Capacity 40 t
            Throat depth 225 mm
            Slide adjustment 85 mm
            Shut height (stroke down, adjust. 375 mm
            Table surface area 640 x 450 mm
            Number of strokes 130 min-1
            Dimensions L x W x H 1200 x 1680 x 2160 mm
            Weight of machine approx. 3,1 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column BEUTLER NOVA CR 2500


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233048 · Eccentric Press - Single Column

          BEUTLER - NOVA CR 2500 - - 2003 - Pilz PNOZ

          Technical details
          pressure 250 t︱stroke 20 - 190 mm︱no. of strokes 25 - 140 /min︱throat 460 mm︱passage to the back 590 mm︱dayligth 690 mm︱table surface area 1500 x 880 mm︱hole in the table 950 x 250 mm︱table height over floor 900 mm︱ram surface 870 x 725 mm︱ram adjustment 120 mm︱power requirement 30,0 kW︱Weight 32,0 t︱dimensions of the machine ca. 2,34 x 2,38 x 3,99 m x m x m︱
          permitted for manual loading and automatic mode according to the CE-norm with infinitely variable drive, light guard (make Sick), hydraulic clutch/brake combination, hydraulic overload protection in ram, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, drawing cushion in table (20 t), motoric centralized lubrication, operator's console with two-hand operation Width between the tie rods in front 940 mm Side passage 900 mm
            pressure 250 t
            stroke 20 - 190 mm
            no. of strokes 25 - 140 /min
            throat 460 mm
            passage to the back 590 mm
            dayligth 690 mm
            table surface area 1500 x 880 mm
            hole in the table 950 x 250 mm
            table height over floor 900 mm
            ram surface 870 x 725 mm
            ram adjustment 120 mm
            power requirement 30,0 kW
            Weight 32,0 t
            dimensions of the machine ca. 2,34 x 2,38 x 3,99 m x m x m
            Description :
            permitted for manual loading and automatic mode according to the CE-norm
            with infinitely variable drive, light guard (make Sick), hydraulic clutch/brake combination, hydraulic overload protection in ram, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, drawing cushion in table (20 t), motoric centralized lubrication, operator's console with two-hand operation
            Width between the tie rods in front 940 mm
            Side passage 900 mm


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Eccentric Press - Single Column SANGIACOMO T130RCE


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15277 · Eccentric Press - Single Column

          SANGIACOMO - T130RCE - - 2002 -

          Technical details
          pressure 130 t︱throat 350 mm︱stroke 16-200 mm︱no. of strokes 55 Hub/min︱ram - range of adjustment 100 mm︱table surface area 1200x700 mm︱ram surface 730x530 mm︱hole in the table 300x210 mm︱table height 900 mm︱tool hole in ram Ø 50 mm︱weight of the machine ca. 8,0 t︱dimensions of the machine ca. BxTxH 1500x2200x3500 mm︱
            pressure 130 t
            throat 350 mm
            stroke 16-200 mm
            no. of strokes 55 Hub/min
            ram - range of adjustment 100 mm
            table surface area 1200x700 mm
            ram surface 730x530 mm
            hole in the table 300x210 mm
            table height 900 mm
            tool hole in ram Ø 50 mm
            weight of the machine ca. 8,0 t
            dimensions of the machine ca. BxTxH 1500x2200x3500 mm


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          TOP Manufacturer:

          MÜLLER - GALDABINI - ZEULENRODA - RÖCHER -