,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Combi grinding machine

          Machinelist: Combi grinding machine


          Combi grinding machine

          used Grinding machines Combi grinding machine HBM 100 Band/Teller


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-67415 · Combi grinding machine

          HBM - 100 Band/Teller - - -Neu- -

          Technical details
          width of the strips 100 mm︱band length 915 mm︱dimensions of grinding wheel 100 x 915 mm︱work table: 225 x 155 mm︱total power requirement 0,44 kW︱weight of the machine ca. 0,018 t︱dimensions of the machine ca. 0,56 x 0,26 x 0,3 m︱
            width of the strips 100 mm
            band length 915 mm
            dimensions of grinding wheel 100 x 915 mm
            work table: 225 x 155 mm
            total power requirement 0,44 kW
            weight of the machine ca. 0,018 t
            dimensions of the machine ca. 0,56 x 0,26 x 0,3 m


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Combi grinding machine HBM 150 Teller-/Band


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-67410 · Combi grinding machine

          HBM - 150 Teller-/Band - - -Neu- -

          Technical details
          width of the strips 150 mm︱band length 1220 mm︱dimensions of grinding wheel 225 mm︱work table: 150 x 400 mm︱Table tiltable up to 90 Grad︱table surface area 150 x 130 mm︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 35 Kg︱dimensions of the machine ca. 650 x 360 x 400 mm︱
            width of the strips 150 mm
            band length 1220 mm
            dimensions of grinding wheel 225 mm
            work table: 150 x 400 mm
            Table tiltable up to 90 Grad
            table surface area 150 x 130 mm
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 35 Kg
            dimensions of the machine ca. 650 x 360 x 400 mm


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Combi grinding machine HBM 200 Stein/Band


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-67413 · Combi grinding machine

          HBM - 200 Stein/Band - - -Neu- -

          Technical details
          width of the strips 100 mm︱band length 915 mm︱dimensions of grinding wheel 200 x 32 mm︱grinding wheel hole diameter 30 mm︱total power requirement 0,9 kW︱weight of the machine ca. 35 Kg︱dimensions of the machine ca. 620 x 540 x 300 mm︱
            width of the strips 100 mm
            band length 915 mm
            dimensions of grinding wheel 200 x 32 mm
            grinding wheel hole diameter 30 mm
            total power requirement 0,9 kW
            weight of the machine ca. 35 Kg
            dimensions of the machine ca. 620 x 540 x 300 mm


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Combi grinding machine WMT 125 / 25x760


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-67411 · Combi grinding machine

          WMT - 125 / 25x760 - - -Neu- -

          Technical details
          width of the strips 25 mm︱band length 762 mm︱dimensions of grinding wheel 125 mm︱Table tiltable up to 45 Grad︱table surface area 130 x 130 mm︱connected load frequency 230 V︱total power requirement 0,3 kW︱weight of the machine ca. 9 Kg︱dimensions of the machine ca. 650 x 360 x 400 mm︱
            width of the strips 25 mm
            band length 762 mm
            dimensions of grinding wheel 125 mm
            Table tiltable up to 45 Grad
            table surface area 130 x 130 mm
            connected load frequency 230 V
            total power requirement 0,3 kW
            weight of the machine ca. 9 Kg
            dimensions of the machine ca. 650 x 360 x 400 mm


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Combi grinding machine HBM 100 Profi Band/Teller


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-67412 · Combi grinding machine

          HBM - 100 Profi Band/Teller - - -Neu- -

          Technical details
          width of the strips 100 mm︱band length 915 mm︱dimensions of grinding wheel 100 x 915 mm︱work table: 225 x 155 mm︱total power requirement 0,44 kW︱weight of the machine ca. 0,018 t︱dimensions of the machine ca. 0,56 x 0,26 x 0,3 m︱
            width of the strips 100 mm
            band length 915 mm
            dimensions of grinding wheel 100 x 915 mm
            work table: 225 x 155 mm
            total power requirement 0,44 kW
            weight of the machine ca. 0,018 t
            dimensions of the machine ca. 0,56 x 0,26 x 0,3 m


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Combi grinding machine HBM I/A-Oszill


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-67414 · Combi grinding machine

          HBM - I/A-Oszill - - -Neu- -

          Technical details
          width of the strips 100 mm︱band length 610 mm︱work table: 170x125 / 265x150 mm︱ 16 mm︱turning speeds 2000 U/min︱roll diameter 16, 23, 29, 41 und 53 mm︱total power requirement 0,45 kW︱weight of the machine ca. 114 Kg︱dimensions of the machine ca. 0,6 x 0,5 x 0,5 m︱
            width of the strips 100 mm
            band length 610 mm
            work table: 170x125 / 265x150 mm
            16 mm
            turning speeds 2000 U/min
            roll diameter 16, 23, 29, 41 und 53 mm
            total power requirement 0,45 kW
            weight of the machine ca. 114 Kg
            dimensions of the machine ca. 0,6 x 0,5 x 0,5 m
            Description :



        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Combi grinding machine HBM HBM 200-S


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-67417 · Combi grinding machine

          HBM - HBM 200-S - - -Neu- -

          Technical details
          width of the strips 100 mm︱band length 915 mm︱dimensions of grinding wheel 200 mm︱work table: 170x125 / 265x150 mm︱total power requirement 0,5 kW︱weight of the machine ca. 26 Kg︱dimensions of the machine ca. 0,6 x 0,5 x 0,3 m︱
            width of the strips 100 mm
            band length 915 mm
            dimensions of grinding wheel 200 mm
            work table: 170x125 / 265x150 mm
            total power requirement 0,5 kW
            weight of the machine ca. 26 Kg
            dimensions of the machine ca. 0,6 x 0,5 x 0,3 m
            Description :



        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact

          Surface Grinding Machine - Horizontal

          used Grinding machines Surface Grinding Machine - Horizontal MAEGERLE F 10


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-10020 · Surface Grinding Machine - Horizontal

          MAEGERLE - F 10 - - unbekannt -

          Technical details
          grinding length 1000 mm︱grinding width 300 mm︱workpiece height 230 mm︱table surface area 1000 x 240 mm︱x-travel 1000 mm︱y-travel 270 mm︱z-travel 350 mm︱grinding wheel diameter 240 mm︱grinding spindle speed 2180 U/min︱table speed -stepless- 3 - 30 m/min︱total power requirement 4,5 kW︱weight of the machine ca. 2,8 t︱dimensions of machine L x W x H 2,36 x 1,37 x 2,0 m︱
          Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachment
            grinding length 1000 mm
            grinding width 300 mm
            workpiece height 230 mm
            table surface area 1000 x 240 mm
            x-travel 1000 mm
            y-travel 270 mm
            z-travel 350 mm
            grinding wheel diameter 240 mm
            grinding spindle speed 2180 U/min
            table speed -stepless- 3 - 30 m/min
            total power requirement 4,5 kW
            weight of the machine ca. 2,8 t
            dimensions of machine L x W x H 2,36 x 1,37 x 2,0 m
            Description :
            Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange
            (ø 240 x 25 mm), wet grinding attachment


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ABA / ZIERSCH & BALTRUSCH ECOLINE 1206 A


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2252 · Surface Grinding Machine - Horizontal

          ABA / ZIERSCH & BALTRUSCH - ECOLINE 1206 A - - 2008 - SIEMENS LC 200 / TP277

          Technical details
          grinding length 1250 mm︱grinding width 600 mm︱workpiece height mm︱Control SIEMENS LC 200 / TP277 ︱total power requirement kW︱weight of the machine ca. 7,7 t︱dimensions of the machine ca. m︱
          CNC precision, surface and profile grinding machine CNC control SIEMENS LC 200 / TP277 Table load maximum to the magnetic chuck 1200 kg Drives: X-axis drive hydraulic Y and Z-axis drive with servo drive and ball screw measuring system: X-axis rotary with rotary encoder Y and Z axis linear scale traverse paths X axis 1400mm Y axis 600mm Z axis 600mm Grinding length 1250 mm Grinding width 600 Distance between table and spindle center 700 mm Grinding wheel diameter 400 mm Grinding wheel width 100 mm Grinding wheel bore 127 mm
            grinding length 1250 mm
            grinding width 600 mm
            Control SIEMENS LC 200 / TP277
            weight of the machine ca. 7,7 t
            Description :
            CNC precision, surface and profile grinding machine

            CNC control SIEMENS LC 200 / TP277

            Table load maximum to the magnetic chuck 1200 kg
            Drives:
            X-axis drive hydraulic
            Y and Z-axis drive with servo drive and ball screw
            measuring system:
            X-axis rotary with rotary encoder
            Y and Z axis linear scale
            traverse paths
            X axis 1400mm
            Y axis 600mm
            Z axis 600mm
            Grinding length 1250 mm
            Grinding width 600
            Distance between table and spindle center 700 mm

            Grinding wheel diameter 400 mm
            Grinding wheel width 100 mm
            Grinding wheel bore 127 mm


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal BLOHM Planomat 612


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9014 · Surface Grinding Machine - Horizontal

          BLOHM - Planomat 612 - - 2006 - Ergomatic Blohm

          Technical details
          grinding length 1.200 mm︱grinding width 600 mm︱workpiece height 550 mm︱control Ergomatic Blohm︱Grinding spindle: ︱max. spindle speed 1.450 1/min︱driving power - grinding spindle 7,5 kW︱grinding wheel diam. min/max. 190 / 400 mm︱grinding wheel wide min./max. 30 / 80 mm︱grinding wheel width (Standard) 50 mm︱grinding wheel hole diameter 127 mm︱movement areas: ︱x-travel 1.300 mm︱y-travel 550 mm︱z-travel 560 mm︱work table: ︱distance grinding spindle - table min./max. 150 / 700 mm︱table surface area 1.200 x 600 mm︱table height over floor 950 mm︱table adjustment - longitudinal 1.300 mm︱
          Surface Grinding Machine - Horizontal BLOHM - Planomat 612
            grinding length 1.200 mm
            grinding width 600 mm
            workpiece height 550 mm
            control Ergomatic Blohm
            max. spindle speed 1.450 1/min
            driving power - grinding spindle 7,5 kW
            grinding wheel diam. min/max. 190 / 400 mm
            grinding wheel wide min./max. 30 / 80 mm
            grinding wheel width (Standard) 50 mm
            grinding wheel hole diameter 127 mm
            x-travel 1.300 mm
            y-travel 550 mm
            z-travel 560 mm
            distance grinding spindle - tabl. 150 / 700 mm
            table surface area 1.200 x 600 mm
            table height over floor 950 mm
            table adjustment - longitudinal 1.300 mm
            Description :
            Surface Grinding Machine - Horizontal
            BLOHM - Planomat 612


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ELB Perfekt 15 SPS


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-061692 · Surface Grinding Machine - Horizontal

          ELB - Perfekt 15 SPS - - 2005 -

          Technical details
          grinding length 1500 mm︱grinding width 600 mm︱workpiece height 400 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - automatic infeed - electro magnet - coolant device Technische Daten / technical details: Schleiflänge / grinding length 1500 mm Schleifbreite / grinding width 600 mm Werkstückhöhe / workpiece height 400 mm Längsachse X / longitudinal travel X 1600 mm Querachse Z / cross travel Z 560 mm Vertikalachse Y / vertical travel Y 400 mm Elektromagnetabmessungen / electro magnet dimensions 1500x600 mm Schleifscheibe / grinding wheel 400x100x127 mm Antriebsleistung Schleifspindel / drive capacity grinding spindle 10 kW Gewicht der Maschine ca. / weight ca. 7100 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            grinding length 1500 mm
            grinding width 600 mm
            workpiece height 400 mm
            Description :
            - automatic infeed
            - electro magnet
            - coolant device

            Technische Daten / technical details:
            Schleiflänge / grinding length 1500 mm
            Schleifbreite / grinding width 600 mm
            Werkstückhöhe / workpiece height 400 mm
            Längsachse X / longitudinal travel X 1600 mm
            Querachse Z / cross travel Z 560 mm
            Vertikalachse Y / vertical travel Y 400 mm
            Elektromagnetabmessungen / electro magnet dimensions 1500x600 mm
            Schleifscheibe / grinding wheel 400x100x127 mm
            Antriebsleistung Schleifspindel / drive capacity grinding spindle 10 kW
            Gewicht der Maschine ca. / weight ca. 7100 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.





        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ABA / ZIERSCH & BALTRUSCH Starline 600E NC-SP


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4675 · Surface Grinding Machine - Horizontal

          ABA / ZIERSCH & BALTRUSCH - Starline 600E NC-SP - - 2004 -

          Technical details
          grinding length 600 mm︱grinding width 500 mm︱workpiece height 500 mm︱table-size 800x400 mm︱table speeds 1-35 m/min︱grinding wheel diameter 400 mm︱spindle drive 11 kW︱weight of the machine ca. 4.5 t︱
          SURFACE % PROFILE GRINDING MACHINE magnetic plate 600x300mm Dresser on table Exhausting device More details on www.marcels-maschinen.ch
            grinding length 600 mm
            grinding width 500 mm
            workpiece height 500 mm
            table-size 800x400 mm
            table speeds 1-35 m/min
            grinding wheel diameter 400 mm
            spindle drive 11 kW
            weight of the machine ca. 4.5 t
            Description :
            SURFACE % PROFILE GRINDING MACHINE

            magnetic plate 600x300mm
            Dresser on table
            Exhausting device

            More details on www.marcels-maschinen.ch


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ABA Powerline


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1599 · Surface Grinding Machine - Horizontal

          ABA - Powerline - - 2001-2023 - SINUMERK 840 D

          Technical details
          grinding length 1.000 mm︱grinding width 600 mm︱workpiece height 400 mm︱Control SINUMERK 840 D ︱Grinding Area : ︱grinding range max. 1.000 x 600 mm︱travel cross (z-axis) 540 mm︱distance table surface - grinding spindle centre max. 600 mm︱Travel vertical (Y-axis) 500 mm︱Max. working height on new grinding wheel 400 mm︱workpiece table : ︱Electro permanent magnetic plate 800 x 500 mm︱pole pitch 18 mm︱clamping force in 8 levels - ︱Table drive (X-axis) : ︱Incremental encoder in the longitudinal axis X axi - ︱table speeds 2-35.000 mm/min︱Electromechanical longitudinal movement - ︱by means of digital servo motor, - ︱toothed belt and ball screw -
          Equipment and accessories - Linear measuring systems in Y- and Z-axis - All linear axes with digital servo motors and ball screw drive - Belt filter system with paper belt filter, tank capacity 640 l, coolant pump 200 l/min/4 bar - Manual coolant nozzles - adjustable - Automatic working chamber door pneumatically controlled - Electro-permanent magnetic plate 800 x 500 mm, pendulum pole pitch 18 mm - Automatic grinding wheel balancing device Fa. MPM - Full enclosure of the working area in stainless steel partial execution with LED working area lighting - Manually operated door, safety interlock in automatic mode - Portable electronic handwheel in automatic and manual mode for all axes - Three-color signal light - Electrical equipment 400V/50Hz - Switch cabinet cooling unit - Machine feet - Painting RAL 9002 (grey white), RAL 5010 (gentian blue) - Rinsing gun with hose and holder in the operating area - Approx. 5 pcs. grinding wheel flanges *** Machine prepared for grinding mist suction *** Grinding programs - Surface grinding - Plunge grinding - Profile grinding - Automatic program sequence with roughing, finishing, fine finishing and burnout - Multiple plunge-cut grinding for economical production - Surface grinding with continuous, infinitely programmable cross feed - Calibration of the grinding wheel (calibrate, backfeed, round corners) - Face grinding with back pull dressing - Dressing in grinding cycle with lift-off amount - Fully automatic compensation of dressing amounts - Tool management Dressing Technology Table dresser -straight- TAG: Dresser fixed on the machine table, roughing and finishing station with dressing tiles are arranged one behind the other, cylindrical dressing of grinding wheels for surface and plunge grinding, suitable for corundum and silicon carbide grinding wheels, cycle software with input menu Pre-profiler VPG-150: incl. diamond roughing wheel width 1.5 mm For economical pre-profiling (roughing out) of the grinding wheel, profiling unit firmly mounted on the table, suitable for corundum and silicon carbide grinding wheels, CNC dressing cycle for pre-profiling Table profile dresser TAD: Suitable for diamond wheel DFR, D = 120, tip radius r = 0.1 - 1mm, flank angle 28°,40°, 60°. Profile depth max. 20 mm, contour accuracy +/- 0.0025 mm, swivel angle +/- 70°, profiling in the program by means of graphical operator guidance in 3-D interpolation
            grinding length 1.000 mm
            grinding width 600 mm
            workpiece height 400 mm
            Control SINUMERK 840 D
            Grinding Area :
            grinding range max. 1.000 x 600 mm
            travel cross (z-axis) 540 mm
            distance table surface - grindin. max. 600 mm
            Travel vertical (Y-axis) 500 mm
            Max. working height on new grind. 400 mm
            workpiece table :
            Electro permanent magnetic plate 800 x 500 mm
            pole pitch 18 mm
            clamping force in 8 levels -
            Table drive (X-axis) :
            Incremental encoder in the longi. -
            table speeds 2-35.000 mm/min
            Electromechanical longitudinal m. -
            by means of digital servo motor, -
            toothed belt and ball screw -
            Description :
            Equipment and accessories
            - Linear measuring systems in Y- and Z-axis
            - All linear axes with digital servo motors and ball screw drive
            - Belt filter system with paper belt filter, tank capacity 640 l, coolant pump 200 l/min/4 bar
            - Manual coolant nozzles - adjustable
            - Automatic working chamber door pneumatically controlled
            - Electro-permanent magnetic plate 800 x 500 mm, pendulum pole pitch 18 mm
            - Automatic grinding wheel balancing device Fa. MPM
            - Full enclosure of the working area in stainless steel partial execution with LED working area lighting
            - Manually operated door, safety interlock in automatic mode
            - Portable electronic handwheel in automatic and manual mode for all axes
            - Three-color signal light
            - Electrical equipment 400V/50Hz
            - Switch cabinet cooling unit
            - Machine feet
            - Painting RAL 9002 (grey white), RAL 5010 (gentian blue)
            - Rinsing gun with hose and holder in the operating area
            - Approx. 5 pcs. grinding wheel flanges

            *** Machine prepared for grinding mist suction ***




            Grinding programs
            - Surface grinding
            - Plunge grinding
            - Profile grinding
            - Automatic program sequence with roughing, finishing, fine finishing and burnout
            - Multiple plunge-cut grinding for economical production
            - Surface grinding with continuous, infinitely programmable cross feed
            - Calibration of the grinding wheel (calibrate, backfeed, round corners)
            - Face grinding with back pull dressing
            - Dressing in grinding cycle with lift-off amount
            - Fully automatic compensation of dressing amounts
            - Tool management


            Dressing Technology

            Table dresser -straight- TAG:
            Dresser fixed on the machine table, roughing and finishing station with dressing tiles are arranged one behind the other, cylindrical dressing of grinding wheels for surface and plunge grinding,
            suitable for corundum and silicon carbide grinding wheels, cycle software with input menu

            Pre-profiler VPG-150:
            incl. diamond roughing wheel width 1.5 mm
            For economical pre-profiling (roughing out) of the grinding wheel, profiling unit firmly mounted on the table, suitable for corundum and silicon carbide grinding wheels, CNC dressing cycle for
            pre-profiling

            Table profile dresser TAD:
            Suitable for diamond wheel DFR, D = 120, tip radius r = 0.1 - 1mm, flank angle 28°,40°, 60°.
            Profile depth max. 20 mm, contour accuracy +/- 0.0025 mm, swivel angle +/- 70°,
            profiling in the program by means of graphical operator guidance in 3-D interpolation




        • FLECKENSTEIN Werkzeugmaschinen GmbH
        • Sommerweg 15
        • 63831 Wiesen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal DANOBAT PSG - 1000


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08117 · Surface Grinding Machine - Horizontal

          DANOBAT - PSG - 1000 - - 2001 - Fanuc 210i - M

          Technical details
          grinding length 1000 mm︱grinding width 600 mm︱workpiece height 450 mm︱Control Fanuc 210i - M ︱total power requirement 20 kW︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. 3950 x 3150 x 2550 mm︱
          CNC surface grinding machine Clamping area of the table 1000 x 500 mm Clamping surface for magnetic particle board 1000 x 500 mm Largest grinding surface: L x W x H 1000 x 600 x 450 mm Largest distance from table to spindle center 650 mm Table speed in the longitudinal direction 1 - 30 m / min Max. Table load 1500 kg Grinding wheel: diameter x width x bore 400 x 50 x Ø 127 mm Grinding spindle drive 7.5 kW Spindle speed 1500 rpm Connected load 20 kW Space required L x W x H 3950 x 3150 x 2550 mm Weight 5500 kg Equipment CNC control Fanuc 210i - M Electro magnetic plate 1000 x 500 mm Coolant device with paper filter Several Grinding wheels with flanges Digital display Condition machine is in good condition
            grinding length 1000 mm
            grinding width 600 mm
            workpiece height 450 mm
            Control Fanuc 210i - M
            total power requirement 20 kW
            weight of the machine ca. 5,5 t
            dimensions of the machine ca. 3950 x 3150 x 2550 mm
            Description :
            CNC surface grinding machine

            Clamping area of the table 1000 x 500 mm
            Clamping surface for magnetic particle board 1000 x 500 mm
            Largest grinding surface: L x W x H 1000 x 600 x 450 mm
            Largest distance from table to spindle center 650 mm
            Table speed in the longitudinal direction 1 - 30 m / min
            Max. Table load 1500 kg
            Grinding wheel: diameter x width x bore 400 x 50 x Ø 127 mm
            Grinding spindle drive 7.5 kW
            Spindle speed 1500 rpm
            Connected load 20 kW
            Space required L x W x H 3950 x 3150 x 2550 mm
            Weight 5500 kg

            Equipment
            CNC control Fanuc 210i - M
            Electro magnetic plate 1000 x 500 mm
            Coolant device with paper filter
            Several Grinding wheels with flanges
            Digital display

            Condition machine is in good condition


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ZIERSCH & BALTRUSCH Starline 500 E


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9054 · Surface Grinding Machine - Horizontal

          ZIERSCH & BALTRUSCH - Starline 500 E - - 2001 - Simatic OP 27 Siemens

          Technical details
          grinding length max. 600 mm︱grinding width max. 250 mm︱workpiece height - mm︱control Simatic OP 27 Siemens︱grinding range 600 x 250 mm︱distance spindle center to table 500 mm︱Grinding spindle: ︱turning speed range - stepless 1.000 - 3.000 U/min︱grinding head 300 x 50 x 76,2 mm︱drive capacity - spindle motor ca. 11 kW︱axis stroke: ︱x - axis 600 mm︱Y - Axis 300 mm︱Z - Axis 250 mm︱work table: ︱magnetic clamping plate 500 x 250 mm︱max. workpiece weight 250 kg︱feeds: ︱rapid traverse ( X / Y / Z ) 30 / 2 / 1,5 m/min︱total power requirement 20 kVA︱
          Surface Grinding Machine Horizontal Ziersch & Baltrusch - Starline 500 E - approx. 9.340 spindle hours - 4x NEW grinding wheels - 4x flanges - LTA suction with stand - Splash guard for work area (half height) - protective door - Infinitely variable speed control of the grinding spindle - Heidenhain: Incremental measuring system, incremental encoders, proximity switches
            grinding length max. 600 mm
            grinding width max. 250 mm
            workpiece height - mm
            control Simatic OP 27 Siemens
            grinding range 600 x 250 mm
            distance spindle center to table 500 mm
            turning speed range - stepless 1.000 - 3.000 U/min
            grinding head 300 x 50 x 76,2 mm
            drive capacity - spindle motor ca. 11 kW
            x - axis 600 mm
            Y - Axis 300 mm
            Z - Axis 250 mm
            magnetic clamping plate 500 x 250 mm
            max. workpiece weight 250 kg
            rapid traverse ( X / Y / Z ) 30 / 2 / 1,5 m/min
            total power requirement 20 kVA
            Description :
            Surface Grinding Machine Horizontal
            Ziersch & Baltrusch - Starline 500 E

            - approx. 9.340 spindle hours
            - 4x NEW grinding wheels
            - 4x flanges
            - LTA suction with stand

            - Splash guard for work area (half height)
            - protective door
            - Infinitely variable speed control of the grinding spindle
            - Heidenhain:
            Incremental measuring system, incremental encoders, proximity switches


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ZIERSCH & BALTRUSCH FMNC SUPERPLUS ZB84


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-18001 · Surface Grinding Machine - Horizontal

          ZIERSCH & BALTRUSCH - FMNC SUPERPLUS ZB84 - - 2000 - Simatic OP27

          Technical details
          grinding length 800 mm︱grinding width 390 mm︱workpiece height 700 mm︱Control Simatic OP27 ︱x-axis 1040 mm︱y-axis 500 mm︱z-axis 390 mm︱spindle speeds (infinitely variable) 1500 - 4000 U/min︱grinding wheel diameter 400 mm︱grinding wheel width 50 mm︱grinding wheel hole diameter 127 ︱table load capacity 400 KG︱total power requirement 12 kW︱weight of the machine ca. 3,3 t︱dimensions of the machine ca. 3,6 x 2,4 x 2,5 m︱
          Grinding spindle KESSLER Clamping magnet SAV 800x400 mm Balancing unit MPM Coolant system with band filter DGS SBF 60 8 Grinding wheel flanges
            grinding length 800 mm
            grinding width 390 mm
            workpiece height 700 mm
            Control Simatic OP27
            x-axis 1040 mm
            y-axis 500 mm
            z-axis 390 mm
            spindle speeds (infinitely varia. 1500 - 4000 U/min
            grinding wheel diameter 400 mm
            grinding wheel width 50 mm
            grinding wheel hole diameter 127
            table load capacity 400 KG
            total power requirement 12 kW
            weight of the machine ca. 3,3 t
            dimensions of the machine ca. 3,6 x 2,4 x 2,5 m
            Description :
            Grinding spindle KESSLER
            Clamping magnet SAV 800x400 mm
            Balancing unit MPM
            Coolant system with band filter DGS SBF 60
            8 Grinding wheel flanges


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal GEIBEL&HOTZ FS 1050 GT CNC Rh


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-775469 · Surface Grinding Machine - Horizontal

          GEIBEL&HOTZ - FS 1050 GT CNC Rh - - 2000 -

          Technical details
          grinding length 1000 mm︱grinding width 500 mm︱workpiece height 425 mm︱Control ︱total power requirement 15 kW︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. m︱
            grinding length 1000 mm
            grinding width 500 mm
            workpiece height 425 mm
            total power requirement 15 kW
            weight of the machine ca. 4,5 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal BLOHM PLANOMAT 616


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-769774 · Surface Grinding Machine - Horizontal

          BLOHM - PLANOMAT 616 - - 2000 -

          Technical details
          grinding length 1600 mm︱grinding width 600 mm︱workpiece height 500 mm︱total power requirement 50 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            grinding length 1600 mm
            grinding width 600 mm
            workpiece height 500 mm
            total power requirement 50 kW


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ROSA LINEA STEEL 13.7


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2254 · Surface Grinding Machine - Horizontal

          ROSA - LINEA STEEL 13.7 - - 2000 - E.C.S. CNC 2401

          Technical details
          grinding length 1500 mm︱grinding width 750 mm︱workpiece height 600 mm︱Control E.C.S. CNC 2401 ︱Table dimensions 1400 x 500 mm︱table load 1700 kg︱dimensions of grinding wheel 400 x 30 x 100 mm︱grinding wheel speed 1450 U/min.︱main drive 11 kW︱table speeds 1 - 40 m/min︱cross feeds: 0 - 4 m/min︱dimensions of machine 5350 x 3100 x 2415 mm︱total power requirement kW︱weight of the machine ca. 9,4 t︱dimensions of the machine ca. m︱
          CNC surface grinding machine in very good condition The machine can be demonstrated under power Equipment: - CNC control E.C.S. CNC 2401 System III - Magnetic plate 1400 x 500 mm - Coolant device with paper band filter Accesories: Machine shoes / fixators Machine documentation Various new spare parts, including coolant pump, grinding wheel with flange, guideway covers, electronics assembly, etc.
            grinding length 1500 mm
            grinding width 750 mm
            workpiece height 600 mm
            Control E.C.S. CNC 2401
            Table dimensions 1400 x 500 mm
            table load 1700 kg
            dimensions of grinding wheel 400 x 30 x 100 mm
            grinding wheel speed 1450 U/min.
            main drive 11 kW
            table speeds 1 - 40 m/min
            cross feeds: 0 - 4 m/min
            dimensions of machine 5350 x 3100 x 2415 mm
            weight of the machine ca. 9,4 t
            Description :
            CNC surface grinding machine in very good condition
            The machine can be demonstrated under power

            Equipment:
            - CNC control E.C.S. CNC 2401 System III
            - Magnetic plate 1400 x 500 mm
            - Coolant device with paper band filter

            Accesories:
            Machine shoes / fixators
            Machine documentation
            Various new spare parts, including coolant pump,
            grinding wheel with flange, guideway covers,
            electronics assembly, etc.


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal GEIBEL & HOTZ FS 635-Z CNC


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-77440 · Surface Grinding Machine - Horizontal

          GEIBEL & HOTZ - FS 635-Z CNC - - 1999 -

          Technical details
          grinding length 600 mm︱grinding width 350 mm︱workpiece height 385 mm︱total power requirement 19 kW︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. m︱
            grinding length 600 mm
            grinding width 350 mm
            workpiece height 385 mm
            total power requirement 19 kW
            weight of the machine ca. 2,3 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal CHEVALIER FSG- 1632


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03150 · Surface Grinding Machine - Horizontal

          CHEVALIER - FSG- 1632 - - 1998 -

          Technical details
          grinding length 810 mm︱grinding width 405 mm︱workpiece height 500 mm︱electro magnetic clamping plate 800 X 400 mm︱table speed -stepless- 5 - 25 m/min︱dimensions of grinding wheel 355 X 50 X 127 mm︱total power requirement 3.7 kW︱weight of the machine ca. 3 t︱
          automatic vertical feed, dressing devise, electro magnet,800 X 400 coolant with paperfilter, hydraulic separate
            grinding length 810 mm
            grinding width 405 mm
            workpiece height 500 mm
            electro magnetic clamping plate 800 X 400 mm
            table speed -stepless- 5 - 25 m/min
            dimensions of grinding wheel 355 X 50 X 127 mm
            total power requirement 3.7 kW
            weight of the machine ca. 3 t
            Description :
            automatic vertical feed, dressing devise, electro magnet,800 X 400
            coolant with paperfilter,
            hydraulic separate


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal GEIBEL & HOTZ FS 850 GT SL


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-775880 · Surface Grinding Machine - Horizontal

          GEIBEL & HOTZ - FS 850 GT SL - - 1998 -

          Technical details
          grinding length 800 mm︱grinding width 500 mm︱workpiece height 425 mm︱total power requirement 15 kW︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. m︱
            grinding length 800 mm
            grinding width 500 mm
            workpiece height 425 mm
            total power requirement 15 kW
            weight of the machine ca. 4,5 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal JUNG JUTEC 420


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20447 · Surface Grinding Machine - Horizontal

          JUNG - JUTEC 420 - - 1997 -

          Technical details
          grinding length 400 mm︱grinding width 200 mm︱workpiece height 300 mm︱digital readout 2 Achsen HEIDENHAIN︱table-size 600 x 200 mm︱max. table load 150 kg︱magnetic clamping plate 400 x 200 mm︱dist. center of grinding spindle - table 415 mm︱table travel longitudinal 420 mm︱table travel cross 190 mm︱table feed 2 - 28 m/min︱turning speed range - grinding wheel 1.680 U/min︱grinding wheel size 225 x 25 x 51 mm︱dressing device Kopfabrichter ︱coolant ︱voltage 400 V︱total power requirement 5,0 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 2,00 x 1,50 x 2,10 m︱switchgear cabinet 0,80 x 0,40 x 1,80 m︱
          - Serial-No.: 9821097 - automat. vertical feed - electr. handwheel - digital display 2 axes HEIDENHAIN - head dresser with compensation - coolant device - magnetic separator
            grinding length 400 mm
            grinding width 200 mm
            workpiece height 300 mm
            digital readout 2 Achsen HEIDENHAIN
            table-size 600 x 200 mm
            max. table load 150 kg
            magnetic clamping plate 400 x 200 mm
            dist. center of grinding spindle. 415 mm
            table travel longitudinal 420 mm
            table travel cross 190 mm
            table feed 2 - 28 m/min
            turning speed range - grinding w. 1.680 U/min
            grinding wheel size 225 x 25 x 51 mm
            dressing device Kopfabrichter
            voltage 400 V
            total power requirement 5,0 kW
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 2,00 x 1,50 x 2,10 m
            switchgear cabinet 0,80 x 0,40 x 1,80 m
            Description :
            - Serial-No.: 9821097
            - automat. vertical feed
            - electr. handwheel
            - digital display 2 axes HEIDENHAIN
            - head dresser with compensation
            - coolant device
            - magnetic separator


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal FAVRETTO MA75


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-04763 · Surface Grinding Machine - Horizontal

          FAVRETTO - MA75 - - 1996 -

          Technical details
          width max. 60 mm︱ 300 mm︱ 127 mm︱ 1350 mm︱ 1.450 U/min︱ 850 mm︱ 300 mm︱ 750 mm︱ 0,001 mm︱ 0,001 mm︱ 0,01 - 0,05 mm︱spindle drive 7,5 kW︱ 0 - 5 m/min︱ 600 mm︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 3.900 x 2.200 x 2.500 m︱
          ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            width max. 60 mm
            300 mm
            127 mm
            1
            350 mm
            1.450 U/min
            850 mm
            300 mm
            750 mm
            0,001 mm
            0,001 mm
            0,01 - 0,05 mm
            spindle drive 7,5 kW
            0 - 5 m/min
            600 mm
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 3.900 x 2.200 x 2.500 m
            Description :

            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            Please note:
            The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.
            Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.
            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   

          TOP Manufacturer:

          HBM - WMT -