,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Gear Honing Machine

          Machinelist: Gear Honing Machine


          Bevel Gear Grinding Machine

          used Gear cutting machines Bevel Gear Grinding Machine GLEASON Phoenix 275 G


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17944 · Bevel Gear Grinding Machine

          GLEASON - Phoenix 275 G - - 2008 - SIN 840 D SIEMENS

          Technical details
          ratio of transmission 10:1 ︱min. number of teeth 3 ︱max. number of teeth 200 ︱range of tooth size 20 mm︱tooth width max. 58 mm︱diameter of tools min 69,85 mm︱diameter of tools max. 230 mm︱x-axis 325 mm︱y-axis 350 mm︱z-axis 470 mm︱work piece table - Ø 212,71 mm︱b-axis + 90,1 / - 1 °︱Control SIN 840 D SIEMENS︱total power requirement 75 kW︱weight of the machine ca. 10.000 Kg︱dimensions of the machine ca. 6,10 x 4,40 x 3,30 m︱
          Hoffmann coolant filter system ERK 140-V(L-C) (built 2008) VT oil mist filter system
            ratio of transmission 10:1
            min. number of teeth 3
            max. number of teeth 200
            range of tooth size 20 mm
            tooth width max. 58 mm
            diameter of tools min 69,85 mm
            diameter of tools max. 230 mm
            x-axis 325 mm
            y-axis 350 mm
            z-axis 470 mm
            work piece table - Ø 212,71 mm
            b-axis + 90,1 / - 1 °
            Control SIN 840 D SIEMENS
            total power requirement 75 kW
            weight of the machine ca. 10.000 Kg
            dimensions of the machine ca. 6,10 x 4,40 x 3,30 m
            Description :
            Hoffmann coolant filter system ERK 140-V(L-C) (built 2008)
            VT oil mist filter system


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine GLEASON Phoenix 275 G


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17513 · Bevel Gear Grinding Machine

          GLEASON - Phoenix 275 G - - 2007 - 160 i - MB FANUC

          Technical details
          ratio of transmission 10:1 ︱min. number of teeth 3 ︱max. number of teeth 200 ︱range of tooth size 20 mm︱diameter of tools min 69,85 mm︱tooth width max. 58 mm︱diameter of tools max. 230 mm︱x-axis 325 mm︱y-axis 350 mm︱z-axis 470 mm︱work piece table - Ø 212,71 mm︱b-axis + 90,1 / - 1 °︱Control 160 i - MB FANUC︱total power requirement 75 kW︱weight of the machine ca. 10.000 Kg︱dimensions of the machine ca. 6,10 x 4,40 x 3,30 m︱
          WAGURI with EWAB robot cell (KUKA Robot) no coolant filter system available
            ratio of transmission 10:1
            min. number of teeth 3
            max. number of teeth 200
            range of tooth size 20 mm
            diameter of tools min 69,85 mm
            tooth width max. 58 mm
            diameter of tools max. 230 mm
            x-axis 325 mm
            y-axis 350 mm
            z-axis 470 mm
            work piece table - Ø 212,71 mm
            b-axis + 90,1 / - 1 °
            Control 160 i - MB FANUC
            total power requirement 75 kW
            weight of the machine ca. 10.000 Kg
            dimensions of the machine ca. 6,10 x 4,40 x 3,30 m
            Description :
            WAGURI
            with EWAB robot cell
            (KUKA Robot)
            no coolant filter system available


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine GLEASON Phoenix 275 G


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17512 · Bevel Gear Grinding Machine

          GLEASON - Phoenix 275 G - - 2005 - SIN 840 D SIEMENS

          Technical details
          ratio of transmission 10:1 ︱min. number of teeth 3 ︱max. number of teeth 200 ︱range of tooth size 20 mm︱tooth width max. 58 mm︱diameter of tools min 69,85 mm︱diameter of tools max. 230 mm︱x-axis 325 mm︱y-axis 350 mm︱z-axis 470 mm︱work piece table - Ø 212,71 mm︱b-axis + 90,1 / - 1 °︱Control SIN 840 D SIEMENS︱total power requirement 75 kW︱weight of the machine ca. 10.000 Kg︱dimensions of the machine ca. 6,10 x 4,40 x 3,30 m︱
          WAGURI with EWAB load cell built in 2012 (Linear loader) no coolant filter system available
            ratio of transmission 10:1
            min. number of teeth 3
            max. number of teeth 200
            range of tooth size 20 mm
            tooth width max. 58 mm
            diameter of tools min 69,85 mm
            diameter of tools max. 230 mm
            x-axis 325 mm
            y-axis 350 mm
            z-axis 470 mm
            work piece table - Ø 212,71 mm
            b-axis + 90,1 / - 1 °
            Control SIN 840 D SIEMENS
            total power requirement 75 kW
            weight of the machine ca. 10.000 Kg
            dimensions of the machine ca. 6,10 x 4,40 x 3,30 m
            Description :
            WAGURI
            with EWAB load cell built in 2012
            (Linear loader)
            no coolant filter system available


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine GLEASON PHOENIX  200 HG


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-328540 · Bevel Gear Grinding Machine

          GLEASON - PHOENIX 200 HG - - 1997 -

          Technical details
          max. wheel diameter 215 mm︱gear width 40,65 mm︱max. module ︱total power requirement 20 kW︱weight of the machine ca. 10 t︱
          Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
            max. wheel diameter 215 mm
            gear width 40,65 mm
            total power requirement 20 kW
            weight of the machine ca. 10 t
            Description :
            Max. external Ø of workpiece 215 mm
            Tooth profile, height x width 16 x 40.65 mm
            No. of teeth 5 - 200
            Max. tooth ratio 1 : 10

            Grinding wheel Ø 51 - 190 mm
            Grinding wheel speeds 1,000 - 6,000 rpm

            X Axis (horizontal) 152 mm
            Y Axis (vertical) 178 mm
            Z Axis (slide base plate) 304 mm
            Distance from middle of machine to middle of workspindle 115 mm
            Axial speed 125 mm/sec
            Workpiece speeds 0 - 30 rpm

            Workspindle bore, conical 3 29/32 inch

            Total electrical load 20 kW - 380 V - 50 Hz
            Weight, approx. 10,000 kg

            Accessories / Special Features

            * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters.
            * Extensive coolant equipment with filter system, band filter, etc.
            * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing.
            * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times.


            Condition : Very good - machine can be inspected here under power
            Delivery : Ex stock, as inspected
            Payment : Net, after conclusion of contract

            Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine GLEASON 120 / 888 W


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-304112 · Bevel Gear Grinding Machine

          GLEASON - 120 / 888 W - - 1980 -

          Technical details
          max. wheel diameter 1010 mm︱gear width 0 mm︱max. module ︱min. module ︱total power requirement 15 kW︱weight of the machine ca. 9,5 t︱dimensions of the machine ca. m︱
          Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * Automatic roughing and finishing process via pre-settable counter and built-in feed cam. * Counter for number of teeth. * Counter for number of dressing cycles. * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. * Various small parts.
            max. wheel diameter 1010 mm
            total power requirement 15 kW
            weight of the machine ca. 9,5 t
            Description :
            Max. depth of tooth 10 mm
            Max. workpiece Ø (for clearance) 1,010 mm
            Max. external Ø of coupling 610 mm

            Sliding base withdraw 216 mm
            Max. distance from grinding wheel to workpiece nose 90 - 430 mm
            Max. weight of workpiece, including clamp 500 kg

            No. of teeth 32 to 150

            Grinding wheel Ø, approx 152 - 320 mm
            Grinding wheel speeds, infinitely variable 0 - 3,600 rpm

            Work spindle bore 60 mm

            Total electrical load, approx. 15 kW - 380 V - 50 Hz
            Weight, approx. 9,500 kg

            Accessories / Special Features
            * Automatic roughing and finishing process via pre-settable counter and
            built-in feed cam.
            * Counter for number of teeth.
            * Counter for number of dressing cycles.
            * 2 built-on dressing units with three dressing diamonds for radius dressing,
            side dressing and wheel end dressing.
            * Built-on index plate for 48 teeth.
            * Separate coolant device with band filter.
            * Separate hydraulic unit.
            * Separate TRION oil mist exhaust.
            * Various small parts.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Honing Machine

          used Gear cutting machines Gear Honing Machine FAESSLER K 400 A CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19716 · Gear Honing Machine

          FAESSLER - K 400 A CNC - - 2004 - NUM 1050

          Technical details
          workpiece diameter 400 mm︱centre distance 1000 mm︱honing length max. 1000 mm︱module range 0,5 - 6/8 ︱pressure angle 40 / 14 °︱max.helical angle +/-30 °︱min. workpiece diameter 5 mm︱gear hobbing width -max. 120 mm︱Control NUM 1050 ︱total power requirement ca. 11 kW︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. 2,4 x 2,3 x 2,4 m︱
          6-Axis machine with - CNC control NUM 1040 with Indramat Servo Drives - huge set of accesories - Set of Grinding tools - exhauster
            workpiece diameter 400 mm
            centre distance 1000 mm
            honing length max. 1000 mm
            module range 0,5 - 6/8
            pressure angle 40 / 14 °
            max.helical angle +/-30 °
            min. workpiece diameter 5 mm
            gear hobbing width -max. 120 mm
            Control NUM 1050
            total power requirement ca. 11 kW
            weight of the machine ca. 4,5 t
            dimensions of the machine ca. 2,4 x 2,3 x 2,4 m
            Description :
            6-Axis machine with
            - CNC control NUM 1040 with Indramat Servo Drives
            - huge set of accesories
            - Set of Grinding tools
            - exhauster



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Honing Machine GLEASON HURTH ZH 125 CNC E


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6811 · Gear Honing Machine

          GLEASON HURTH - ZH 125 CNC E - - 2001 - SIEMENS 840 C

          Technical details
          workpiece diameter 125 mm︱module 4 ︱Control SIEMENS 840 C ︱x-axis 105 mm︱y-axis 40 mm︱z-axis 500 mm︱total power requirement 47 kVA︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. 2,6x2,1x3,1 m︱
          with measuring and palletizing system from Hörzer & Fehrenbach for gearwheels (bore receiver) Workpiece diameter: 17-39.5 mm Component height: approx. 6-15 mm Oblique as well as straight toothed
            workpiece diameter 125 mm
            module 4
            Control SIEMENS 840 C
            x-axis 105 mm
            y-axis 40 mm
            z-axis 500 mm
            total power requirement 47 kVA
            weight of the machine ca. 5,5 t
            dimensions of the machine ca. 2,6x2,1x3,1 m
            Description :
            with measuring and palletizing system from Hörzer & Fehrenbach

            for gearwheels (bore receiver)
            Workpiece diameter: 17-39.5 mm
            Component height: approx. 6-15 mm
            Oblique as well as straight toothed


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Honing Machine REISHAUER RZR


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-309529 · Gear Honing Machine

          REISHAUER - RZR - - 1996 -

          Technical details
          workpiece diameter 240 mm︱centre distance 0 mm︱honing length max. 500 mm︱max. module 5 ︱total power requirement 12 kW︱weight of the machine ca. 5000 kg︱dimensions of the machine ca. m︱
            workpiece diameter 240 mm
            honing length max. 500 mm
            max. module 5
            total power requirement 12 kW
            weight of the machine ca. 5000 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Honing Machine FÄSSLER D - 250 / H5


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-0337091 · Gear Honing Machine

          FÄSSLER - D - 250 / H5 - - 1983 -

          Technical details
          workpiece diameter 250 mm︱centre distance 0 mm︱honing length max. mm︱max. module 5
          Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.
            workpiece diameter 250 mm
            max. module 5
            Description :
            Gear Ø, min./max. 10 / 250 mm
            Module range 1 - 5
            Length of teeth / max. table stroke 500 mm
            Height of centres of tailstocks 220 mm

            Max. weight of workpiece 50 / 100 kg
            Honing head swivelling +/- 35 °

            Speeds of honing tool 20 - 500 rpm
            Size of honing tool, Ø x width 300 x 40 mm

            Workpiece speeds 500 - 3,000 rpm
            Total adjustment of cross slide 270 mm
            Rapid traverse of cross slide 50 mm
            Infeed travel of cross slide, mechanical 1 - 8 mm/Ø
            Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec

            Table speeds, hydraulic 0 - 6 m/min

            Total electrical load 5.5 kW - 380 V - 50 Hz
            Weight 3,200 kg

            Accessories / Special Features
            * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter.
            * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc.
            * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped).
            * Separate honing oil unit with magnetic separator and fine filter.
            * Mechanical tailstocks for manual loading. * Oil mist separator.
            * Sliding doors with foot switch. * Separate hydraulic unit.


            Condition : Good. Machine can be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

            We have a large selection of gear machines available. Please let us know your requirements.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          GLEASON HURTH - FÄSSLER - REISHAUER -