,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Rack Grinding Machine

          Machinelist: Rack Grinding Machine


          Gear Hobbing Machine - Horizontal

          used Gear cutting machines Gear Hobbing Machine - Horizontal BARBER COLMAN 16 - 16


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-19056 · Gear Hobbing Machine - Horizontal

          BARBER COLMAN - 16 - 16 - - ca. 1980 -

          Technical details
          max. wheel diameter 406 mm︱gear width 420 mm︱max. module 4,3 ︱min. module 0,5 ︱hob turning speeds 49 - 246 U/min︱table bore diameter 80 mm︱total power requirement 7 kW︱weight of the machine ca. 3,5 t︱dimensions of the machine ca. 2,8 x 1,6 x 2,2 m︱
            max. wheel diameter 406 mm
            gear width 420 mm
            max. module 4,3
            min. module 0,5
            hob turning speeds 49 - 246 U/min
            table bore diameter 80 mm
            total power requirement 7 kW
            weight of the machine ca. 3,5 t
            dimensions of the machine ca. 2,8 x 1,6 x 2,2 m
            Description :



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal GLEASON-PFAUTER P90


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1643 · Gear Hobbing Machine - Horizontal

          GLEASON-PFAUTER - P90 - - 2015 - Siemens - Sinumerik 840 D

          Technical details
          workpiece dia. 100 mm︱module 3.0 mm︱fixture slide travel 400 mm︱Control Siemens - Sinumerik 840 D ︱max. milling cutter diameter 80 mm︱cutter length max. 180 mm︱turning speed range 50 - 12.000 U/min︱table turning speeds 3.000 U/min︱
          Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached extraction system: Ringler, - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle - AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - Workspace, - tailstock, - measuring device, - refrigeration system, - Industrial robots: Epson, - goods carrier, - conveyor belts, - control panel, The machine is in very good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: P 90 | P-90 | Gleason Pfauter P90
            workpiece dia. 100 mm
            module 3.0 mm
            fixture slide travel 400 mm
            Control Siemens - Sinumerik 840 D
            max. milling cutter diameter 80 mm
            cutter length max. 180 mm
            turning speed range 50 - 12.000 U/min
            table turning speeds 3.000 U/min
            Description :
            Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90
            equipped with magnetic chip conveyor for dry and/or wet machining.

            Furnishing:
            - attached extraction system: Ringler,
            - with platform,
            - subindulgence,
            - subsequent loading and unloading handling: Epson - LS6-602S (built 2018),
            - sorting unit,
            - Calibration unit: Stotz, control: Siemens - HMI,
            - Work cell: Eagle - AMZ, with workpiece tray,
            - position check,
            - exit conveyor belt,
            - Control cabinet, with cooling unit: Rittal
            - Workspace,
            - tailstock,
            - measuring device,
            - refrigeration system,
            - Industrial robots: Epson,
            - goods carrier,
            - conveyor belts,
            - control panel,


            The machine is in very good condition.

            For additional equipment information please refer
            to the original order confirmation which is included
            in the offer of this machine.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: P 90 | P-90 | Gleason Pfauter P90


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal GLEASON-PFAUTER P60


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1640 · Gear Hobbing Machine - Horizontal

          GLEASON-PFAUTER - P60 - - 2014 - Siemens - Sinumerik 840 D

          Technical details
          workpiece dia. 80 mm︱module 2,5 mm︱fixture slide travel 220 mm︱Control Siemens - Sinumerik 840 D ︱max. milling cutter diameter 100 mm︱cutter length max. 160 mm︱turning speed range 200 - 5.000 U/min︱table turning speeds 3.000 U/min︱
          Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P60 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached exhaust system for dry processing: Ringler, - Noise insulation for dry milling machine - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - coolant device, - Automation unit: AMZ, The machine is in very good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: P 60 | P-60 | Gleason Pfauter P60
            workpiece dia. 80 mm
            module 2,5 mm
            fixture slide travel 220 mm
            Control Siemens - Sinumerik 840 D
            max. milling cutter diameter 100 mm
            cutter length max. 160 mm
            turning speed range 200 - 5.000 U/min
            table turning speeds 3.000 U/min
            Description :
            Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P60
            equipped with magnetic chip conveyor for dry and/or wet machining.


            Furnishing:

            - attached exhaust system for dry processing: Ringler,
            - Noise insulation for dry milling machine
            - with platform,
            - subindulgence,
            - subsequent loading and unloading handling: Epson - LS6-602S (built 2018),
            - sorting unit,
            - Calibration unit: Stotz, control: Siemens - HMI,
            - Work cell: Eagle AMZ, with workpiece tray,
            - position check,
            - exit conveyor belt,
            - Control cabinet, with cooling unit: Rittal
            - coolant device,
            - Automation unit: AMZ,

            The machine is in very good condition.

            For additional equipment information please refer
            to the original order confirmation which is included
            in the offer of this machine.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: P 60 | P-60 | Gleason Pfauter P60


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal GLEASON- PFAUTER P 60


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23022 · Gear Hobbing Machine - Horizontal

          GLEASON- PFAUTER - P 60 - - 2002 -

          Technical details
          max. wheel diameter 65 mm︱gear width 140 mm︱max. module 3 ︱min. module 0,5 ︱total power requirement kW︱weight of the machine ca. 4,8 t︱dimensions of the machine ca. 3,0 x 2,1 x 2,3 m︱
            max. wheel diameter 65 mm
            gear width 140 mm
            max. module 3
            min. module 0,5
            weight of the machine ca. 4,8 t
            dimensions of the machine ca. 3,0 x 2,1 x 2,3 m


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal PFAUTER P100


          • IVW GMBH
          • Niederrheinstr.298
          • 40489 Düsseldorf
          • Deutschland

          • (0049)211-4184428
            (0049)211-4184430
          • cd@ivwgmbh.com
            www.ivwgmbh.com
          #1088-E00864 · Gear Hobbing Machine - Horizontal

          PFAUTER - P100 - - 1999 - Siemens 840 C

          Technical details
          max. wheel diameter 90 mm︱gear width 50 mm︱max. module 3 ︱min. module 0,5 ︱Control Siemens 840 C ︱total power requirement 16 kW︱weight of the machine ca. 7,9 t︱dimensions of the machine ca. 2 x 2 x 2 m︱
            max. wheel diameter 90 mm
            gear width 50 mm
            max. module 3
            min. module 0,5
            Control Siemens 840 C
            total power requirement 16 kW
            weight of the machine ca. 7,9 t
            dimensions of the machine ca. 2 x 2 x 2 m


        • IVW GMBH
        • Niederrheinstr.298
        • 40489 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal PFAUTER P100


          • IVW GMBH
          • Niederrheinstr.298
          • 40489 Düsseldorf
          • Deutschland

          • (0049)211-4184428
            (0049)211-4184430
          • cd@ivwgmbh.com
            www.ivwgmbh.com
          #1088-E00863 · Gear Hobbing Machine - Horizontal

          PFAUTER - P100 - - 1998 - Siemens 840 C

          Technical details
          max. wheel diameter 90 mm︱gear width 50 mm︱max. module 3 ︱min. module 0,5 ︱Control Siemens 840 C ︱total power requirement 16 kW︱weight of the machine ca. 7,9 t︱dimensions of the machine ca. 2 x 2 x 2 m︱
            max. wheel diameter 90 mm
            gear width 50 mm
            max. module 3
            min. module 0,5
            Control Siemens 840 C
            total power requirement 16 kW
            weight of the machine ca. 7,9 t
            dimensions of the machine ca. 2 x 2 x 2 m


        • IVW GMBH
        • Niederrheinstr.298
        • 40489 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal PFAUTER P100


          • IVW GMBH
          • Niederrheinstr.298
          • 40489 Düsseldorf
          • Deutschland

          • (0049)211-4184428
            (0049)211-4184430
          • cd@ivwgmbh.com
            www.ivwgmbh.com
          #1088-E00862 · Gear Hobbing Machine - Horizontal

          PFAUTER - P100 - - 1997 - Siemens 840 C

          Technical details
          max. wheel diameter 90 mm︱gear width 50 mm︱max. module 3 ︱min. module 0,5 ︱Control Siemens 840 C ︱total power requirement 16 kW︱weight of the machine ca. 7,9 t︱dimensions of the machine ca. 2 x 2 x 2 m︱
            max. wheel diameter 90 mm
            gear width 50 mm
            max. module 3
            min. module 0,5
            Control Siemens 840 C
            total power requirement 16 kW
            weight of the machine ca. 7,9 t
            dimensions of the machine ca. 2 x 2 x 2 m


        • IVW GMBH
        • Niederrheinstr.298
        • 40489 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal PFAUTER P100


          • IVW GMBH
          • Niederrheinstr.298
          • 40489 Düsseldorf
          • Deutschland

          • (0049)211-4184428
            (0049)211-4184430
          • cd@ivwgmbh.com
            www.ivwgmbh.com
          #1088-E00861 · Gear Hobbing Machine - Horizontal

          PFAUTER - P100 - - 1995 - Siemens 840 C

          Technical details
          max. wheel diameter 90 mm︱gear width 50 mm︱max. module 3 ︱min. module 0,5 ︱Control Siemens 840 C ︱total power requirement 16 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. 2 x 2 x 2 m︱
            max. wheel diameter 90 mm
            gear width 50 mm
            max. module 3
            min. module 0,5
            Control Siemens 840 C
            total power requirement 16 kW
            weight of the machine ca. 7,5 t
            dimensions of the machine ca. 2 x 2 x 2 m


        • IVW GMBH
        • Niederrheinstr.298
        • 40489 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal PFAUTER PE 125 H


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23084 · Gear Hobbing Machine - Horizontal

          PFAUTER - PE 125 H - - 1992 - Bosch CC 220

          Technical details
          max. wheel diameter 130 mm︱gear width 400 mm︱max. module 3 ︱min. module 0,5 ︱Control Bosch CC 220 ︱milling spindle speeds (infinitely variable) 300 - 1200 U/min︱clamping length max. 1160 mm︱swivel angle for work spindle +/- 45 °︱x-travel 230 mm︱y-travel 170 mm︱z-travel 400 mm︱spindle speeds 1 - 125 mm︱total power requirement 52 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. 4,8 x 3,8 x 2,5 m︱
          Machine in very nice condition! More machines under www.emuk.info
            max. wheel diameter 130 mm
            gear width 400 mm
            max. module 3
            min. module 0,5
            Control Bosch CC 220
            milling spindle speeds (infinite. 300 - 1200 U/min
            clamping length max. 1160 mm
            swivel angle for work spindle +/- 45 °
            x-travel 230 mm
            y-travel 170 mm
            z-travel 400 mm
            spindle speeds 1 - 125 mm
            total power requirement 52 kW
            weight of the machine ca. 7,5 t
            dimensions of the machine ca. 4,8 x 3,8 x 2,5 m
            Description :
            Machine in very nice condition!
            More machines under www.emuk.info


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal MIKRON A 35/36 CNC


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-473370a · Gear Hobbing Machine - Horizontal

          MIKRON - A 35/36 CNC - - 1992 -

          Technical details
          max. wheel diameter 150 mm︱gear width 300 mm︱max. module 4,5 ︱min. module ︱total power requirement 20 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. m︱
            max. wheel diameter 150 mm
            gear width 300 mm
            max. module 4,5
            total power requirement 20 kW
            weight of the machine ca. 6 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal MIKRON A 33/1


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-448351 · Gear Hobbing Machine - Horizontal

          MIKRON - A 33/1 - - 1985 -

          Technical details
          max. wheel diameter 80 mm︱gear width 150 mm︱max. module 2,5 ︱min. module ︱total power requirement 10 kW︱weight of the machine ca. 2400 kg︱
          M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 ____________________________________________________________ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.
            max. wheel diameter 80 mm
            gear width 150 mm
            max. module 2,5
            total power requirement 10 kW
            weight of the machine ca. 2400 kg
            Description :
            M I K R O N (Switzerland)
            Fully Automatic Gear Hobber for Worm Gears
            Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15
            ____________________________________________________________

            max. gear- without feed magazine approx. 80 mm
            max. gear- with feed magazine approx. 50 mm
            Module max. 2, / 2,5

            Axial milling length approx. 150 mm
            max. workpiece-mounting length approx. 200 mm

            Milling slide can be swivelled up to 90 degrees
            Milling cutter - 24 - 50/63 mm
            Max. radial distance of milling slide 0-14/18 mm
            Milling cutter adjustment max. 25 mm
            Milling cutter speed 212 - 2.000 rpm

            Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation
            radial infinitely adjustable 0,2 - 200 mm/min.

            Milling spindle drive 3 kW
            Total electrical load approx. 10 kW - 50 Hz - 380 Volt
            Weight approx. 2.400 kg

            Accessories/Special Features:
            " Fully automatic operation cycle and minimum idle times due to programmable
            SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off
            for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering
            including 30 different numeric error displays
            Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for
            loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock,
            the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously.
            The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper.
            The whole process is electrically monitored and checked.
            The complete loading facility is encased by plexiglass.
            " Hydraulic work piece clamping device including collets and hydraulic ejector
            " separate cooling system with magnetic separator * separate hydraulic system * various change gears

            This machine is set up for worm gears/armature shafts that can be used for adjustable
            car seats, window lifters, etc.



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal MIKRON A 33/0


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-482607 · Gear Hobbing Machine - Horizontal

          MIKRON - A 33/0 - - 1982 -

          Technical details
          max. wheel diameter 0 mm︱gear width 150 mm︱max. module 2,5 ︱min. module ︱total power requirement 10 kW︱weight of the machine ca. 2400 kg︱dimensions of the machine ca. m︱
            gear width 150 mm
            max. module 2,5
            total power requirement 10 kW
            weight of the machine ca. 2400 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal MIKRON M122.01


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00321 · Gear Hobbing Machine - Horizontal

          MIKRON - M122.01 - - 1980 -

          Technical details
          max. wheel diameter 40 mm︱gear width 35 mm︱max. module 1 ︱min. module 0 ︱voltage 380V 50Hz ︱total power requirement 0,61 kW︱weight of the machine ca. 320 kg︱dimensions of the machine ca. 70x67x134 cm︱
          We quote a horizontal and universal gear hobber of SWISS type MIKRON M122.01 in very good condition. This machine can hob spur and helical gears as well as worms up to module 1,00. The max. diameter is 40mm and width up to 35mm. With the machine is cooling pump with bassin and a set of changing wheels according to list and fixed in machine. Come for inspection to our storage in Giebelstadt, about 80min. from FRANKFURT AIRORT.
            max. wheel diameter 40 mm
            gear width 35 mm
            max. module 1
            voltage 380V 50Hz
            total power requirement 0,61 kW
            weight of the machine ca. 320 kg
            dimensions of the machine ca. 70x67x134 cm
            Description :
            We quote a horizontal and universal gear hobber of SWISS type MIKRON M122.01 in
            very good condition. This machine can hob spur and helical gears as well as
            worms up to module 1,00. The max. diameter is 40mm and width up to 35mm.

            With the machine is cooling pump with bassin and a set of changing wheels
            according to list and fixed in machine.

            Come for inspection to our storage in Giebelstadt, about 80min. from FRANKFURT
            AIRORT.



        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 4.500 €
          Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal WMW ZFWZ 250 x 5A


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23254 · Gear Hobbing Machine - Horizontal

          WMW - ZFWZ 250 x 5A - - 1975 -

          Technical details
          tool taper MK4 ︱diameter of tools max. Ø 145 mm︱table-size L: 800 x B: 700 mm︱surface area Ø 300 mm︱table travel 200 mm︱indexing max 5 Modul︱total power requirement 7,5 kW︱weight of the machine ca. 4,9 t︱dimensions of the machine ca. 2,8 x 1,5 x 2,3 m︱
          Additional information: Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profiles Cycle milling and single milling as well as up-cut and climb milling Specifications for machining spur and worm gears: -Outer Ø max. 250mm with counterholder -pitch max. 5mm -Tooth helix max. 45° -Tooth width max. axial milling 200mm and radial-axial milling 240mm -Milling width max. clamping table counterholder 655mm Milling slide: -swivelling 210° -travelling distance 350mm -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution Further features: -counter-point taper MK4, co-rotating -Centre distance of milling/clamping spindle with counter-holder min./max.: 30 / 240 mm -Counterholder with guide bushes (clamping arbor and milling arbor)
            tool taper MK4
            diameter of tools max. Ø 145 mm
            table-size L: 800 x B: 700 mm
            surface area Ø 300 mm
            table travel 200 mm
            indexing max 5 Modul
            total power requirement 7,5 kW
            weight of the machine ca. 4,9 t
            dimensions of the machine ca. 2,8 x 1,5 x 2,3 m
            Description :
            Additional information:

            Application: Gear hobbing machine for gear cutting of spur and helical gears,
            worm gears and rollable profiles
            Cycle milling and single milling as well as up-cut and climb milling

            Specifications for machining spur and worm gears:
            -Outer Ø max. 250mm with counterholder
            -pitch max. 5mm
            -Tooth helix max. 45°
            -Tooth width max. axial milling 200mm and radial-axial milling 240mm
            -Milling width max. clamping table counterholder 655mm

            Milling slide:
            -swivelling 210°
            -travelling distance 350mm
            -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution

            Further features:
            -counter-point taper MK4, co-rotating
            -Centre distance of milling/clamping spindle with counter-holder min./max.: 30 /
            240 mm
            -Counterholder with guide bushes (clamping arbor and milling arbor)



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal KOEPFER 172


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23086 · Gear Hobbing Machine - Horizontal

          KOEPFER - 172 - - 1972 -

          Technical details
          max. wheel diameter 120 mm︱gear width 150 mm︱max. module 2,5 ︱min. module 0,3 ︱turning speeds 112 - 1000 U/min︱min. number of teeth 6 ︱clamping length max. 300 mm︱total power requirement 3,5 kW︱weight of the machine ca. 1,8 t︱dimensions of the machine ca. 1,3 x 1,2 x 1,5 m︱
            max. wheel diameter 120 mm
            gear width 150 mm
            max. module 2,5
            min. module 0,3
            turning speeds 112 - 1000 U/min
            min. number of teeth 6
            clamping length max. 300 mm
            total power requirement 3,5 kW
            weight of the machine ca. 1,8 t
            dimensions of the machine ca. 1,3 x 1,2 x 1,5 m
            Description :



        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal KOEPFER 135


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-26365B · Gear Hobbing Machine - Horizontal

          KOEPFER - 135 - - 1968 -

          Technical details
          max. wheel diameter mm︱gear width mm︱max. module 0︱min. module 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          Gr. to fraesender Ø 24 mm milling cutter diameter: 70 mm
          Gr. to fraesender Ø 50 mm milling cutter diameter: 46 mm
          Gr. to fraesender Ø Magazine: 40 mm
          Gr. Milling length minus gate: 75 mm
          Gr. Workpiece length with magazine: 75 mm
          Gr. Depth: 4 mm
          Gr. Module: 1.25
          KL. being milled tooth number: 3
          Main spindle hole: 18 mm
          Clamping Collet clamping area: 3-18 mm
          I9cyejl
          9 cutter speed: 222-1410 RPM
          10 longitudinal feeds: 0.031-1.25 mm
          Electr. Supply: 380 V, 1 kW
          Weight: 850 kg
          Space requirements: 1050 x 700 x 1500 mm
            Description :
            Gr. to fraesender Ø 24 mm milling cutter diameter: 70 mm

            Gr. to fraesender Ø 50 mm milling cutter diameter: 46 mm

            Gr. to fraesender Ø Magazine: 40 mm

            Gr. Milling length minus gate: 75 mm

            Gr. Workpiece length with magazine: 75 mm

            Gr. Depth: 4 mm

            Gr. Module: 1.25

            KL. being milled tooth number: 3

            Main spindle hole: 18 mm

            Clamping Collet clamping area: 3-18 mm

            I9cyejl

            9 cutter speed: 222-1410 RPM

            10 longitudinal feeds: 0.031-1.25 mm

            Electr. Supply: 380 V, 1 kW

            Weight: 850 kg

            Space requirements: 1050 x 700 x 1500 mm


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Horizontal KOEPFER 170


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-24039 · Gear Hobbing Machine - Horizontal

          KOEPFER - 170 - - -

          Technical details
          max. wheel diameter 130 mm︱gear width 140 mm︱max. module 2,5 ︱min. module 0,3 ︱turning speeds 112 - 1000 U/min︱min. number of teeth 6 ︱clamping length max. 150 mm︱total power requirement 3,5 kW︱weight of the machine ca. 2,1 t︱dimensions of the machine ca. 1,3 x 1,2 x 1,5 m︱
            max. wheel diameter 130 mm
            gear width 140 mm
            max. module 2,5
            min. module 0,3
            turning speeds 112 - 1000 U/min
            min. number of teeth 6
            clamping length max. 150 mm
            total power requirement 3,5 kW
            weight of the machine ca. 2,1 t
            dimensions of the machine ca. 1,3 x 1,2 x 1,5 m
            Description :



        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer: