,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Gear cutting machines

          Machinelist: Gear cutting machines


          Gear Grinding Machine

          used Gear cutting machines Gear Grinding Machine GLEASON- PFAUTER P 1200 G


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24152 · Gear Grinding Machine

          GLEASON- PFAUTER - P 1200 G - - 2004 - Siemens 840D

          Technical details
          max. wheel diameter 1200 mm︱profile depth 80 mm︱radial slide travel 770 mm︱tangential adjustment 300 mm︱maximum axial offset 1000 mm︱pivoting angle +/- 45 Grad︱table diameter 800 mm︱table hole 182 mm︱spindle turning speed - stepless 1200 - 8000 U/min︱table turning speeds 0 - 10 U/min︱control Siemens 840D ︱total power requirement 80 kVA︱weight of the machine ca. 18 t︱dimensions of the machine ca. 7,9 x 7,4 x 4,0 m︱
          Top condition, DIN 3 quality! Onboeard measuring system, filtering system.
            max. wheel diameter 1200 mm
            profile depth 80 mm
            radial slide travel 770 mm
            tangential adjustment 300 mm
            maximum axial offset 1000 mm
            pivoting angle +/- 45 Grad
            table diameter 800 mm
            table hole 182 mm
            spindle turning speed - stepless 1200 - 8000 U/min
            table turning speeds 0 - 10 U/min
            control Siemens 840D
            total power requirement 80 kVA
            weight of the machine ca. 18 t
            dimensions of the machine ca. 7,9 x 7,4 x 4,0 m
            Description :
            Top condition, DIN 3 quality!
            Onboeard measuring system, filtering system.



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Hobbing Machine - Horizontal

          used Gear cutting machines Gear Hobbing Machine - Horizontal GLEASON- PFAUTER P 60


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23022 · Gear Hobbing Machine - Horizontal

          GLEASON- PFAUTER - P 60 - - 2002 -

          Technical details
          max. wheel diameter 65 mm︱gear width 140 mm︱max. module 3 ︱min. module 0,5 ︱total power requirement kW︱weight of the machine ca. 4,8 t︱dimensions of the machine ca. 3,0 x 2,1 x 2,3 m︱
            max. wheel diameter 65 mm
            gear width 140 mm
            max. module 3
            min. module 0,5
            weight of the machine ca. 4,8 t
            dimensions of the machine ca. 3,0 x 2,1 x 2,3 m


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Hobbing Machine - Vertical

          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON- PFAUTER P 1200


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-E23258 · Gear Hobbing Machine - Vertical

          GLEASON- PFAUTER - P 1200 - - 2008 - Siemens 840 D

          Technical details
          max. wheel diameter 1200 mm︱gear width 1000 mm︱max. module 25/36 ︱min. module 1 ︱Control Siemens 840 D ︱table load 15 t︱total power requirement 75 kW︱weight of the machine ca. 24 t︱dimensions of the machine ca. 6,5x4x3,75 m︱
          Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - 2 x fume separator make "3nine" type EMMA - Chip scraper conveyor - Set of adjusting wedges - Dialogue program "Milling in single-part process" - Switching the machine (dry/wet) - Counterholder tip - travelling - - Magnetic roller - Clamping upper part - complete - Clamping device - complete - Special chip separator - Special chip separator - Signal light (3-coloured) - Telephone diagnosis system - Swivelling counter bearing holder - Monitoring devices - Warm-up programme - Network connection (Ethernet) - Dialogue program "Saving shifting data" - Dialogue program "Saving damaged areas" - 19" flat control panel OP 015A - Rinsing gun - Special software Free travelling counterholder - Intermediate plate 300 mm for raising the counter support position - Milling arbor 40 mm diameter changed to milling arbor 60 mm - BDE/MDE interface in the machine control cabinet - Oil separation systems 3nine System EMMA Working range and technical data: - Nominal workpiece diameter... 1,200 mm - Gear hobbing approx... 25 mm - Tooth moulding approx... 35 mm Guide values depending on the respective machining task Smallest/largest distance between milling cutter and workpiece axis... 100 / 750 mm Largest axial slide path... 1,000 mm (special design) Largest clampable hob cutter - Ø 450 mm Length... 500 mm Swivelling range of the milling head... + 30/- 45º Cutter arbour taper... HSK-B160 (hollow shank taper according to DIN 69063) Largest milling cutter movement... 450 mm Table diameter... 1,200 mm Table bore - Ø 300 mm Depth... 875 mm Maximum table load approx... 15,000 kg Workpiece: - Module max. 25 mm (in steel, 600N/mm²), - Module profile milling max. 35 mm, - Ø max. 1,200 mm, Roll milling cutter: - Head circle Ø max. 450 mm, - length max. 500 mm, - Carriage paths: X/Y/Z- 800 / 450 / 1,000 mm, - Milling head swivelling angle... +A/-A-30/15 degrees, - Hydraulic unit, made by Parker,
            max. wheel diameter 1200 mm
            gear width 1000 mm
            max. module 25/36
            min. module 1
            Control Siemens 840 D
            table load 15 t
            total power requirement 75 kW
            weight of the machine ca. 24 t
            dimensions of the machine ca. 6,5x4x3,75 m
            Description :
            Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and
            worm gears worm gears and all other rolling profiles and shapes that regularly
            occur on the cylindrical workpiece circumference.

            Remark:
            Machine designed for external milling, large milling head M3. Machine with
            counter stand.

            Scope of equipment:
            - Basic machine P 1200, Siemens 840D PowerLine (XP)
            - Motorised milling head M3
            - Special speed series motorised milling head M3
            - Extended software for fault diagnosis
            - Main stand - raised 1000mm
            - 2 x fume separator make "3nine" type EMMA
            - Chip scraper conveyor
            - Set of adjusting wedges
            - Dialogue program "Milling in single-part process"
            - Switching the machine (dry/wet)
            - Counterholder tip - travelling -
            - Magnetic roller
            - Clamping upper part - complete
            - Clamping device - complete - Special chip separator
            - Special chip separator
            - Signal light (3-coloured)
            - Telephone diagnosis system
            - Swivelling counter bearing holder
            - Monitoring devices
            - Warm-up programme
            - Network connection (Ethernet)
            - Dialogue program "Saving shifting data"
            - Dialogue program "Saving damaged areas"
            - 19" flat control panel OP 015A
            - Rinsing gun
            - Special software Free travelling counterholder
            - Intermediate plate 300 mm for raising the counter support position
            - Milling arbor 40 mm diameter changed to milling arbor 60 mm
            - BDE/MDE interface in the machine control cabinet
            - Oil separation systems 3nine System EMMA

            Working range and technical data:

            - Nominal workpiece diameter... 1,200 mm
            - Gear hobbing approx... 25 mm
            - Tooth moulding approx... 35 mm

            Guide values depending on the respective machining task

            Smallest/largest distance between milling cutter and workpiece axis... 100 /
            750 mm
            Largest axial slide path... 1,000 mm (special design)

            Largest clampable hob cutter - Ø 450 mm
            Length... 500 mm

            Swivelling range of the milling head... + 30/- 45º
            Cutter arbour taper... HSK-B160 (hollow shank taper according to DIN 69063)

            Largest milling cutter movement... 450 mm
            Table diameter... 1,200 mm

            Table bore - Ø 300 mm
            Depth... 875 mm
            Maximum table load approx... 15,000 kg

            Workpiece:
            - Module max. 25 mm (in steel, 600N/mm²),
            - Module profile milling max. 35 mm,
            - Ø max. 1,200 mm,

            Roll milling cutter:
            - Head circle Ø max. 450 mm,
            - length max. 500 mm,
            - Carriage paths: X/Y/Z- 800 / 450 / 1,000 mm,
            - Milling head swivelling angle... +A/-A-30/15 degrees,
            - Hydraulic unit, made by Parker,


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON- PFAUTER P 1200


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-E23256 · Gear Hobbing Machine - Vertical

          GLEASON- PFAUTER - P 1200 - - 2008 - Siemens 840 D PowerLine

          Technical details
          max. wheel diameter 1200 mm︱gear width 1000 mm︱max. module 25/36 Modul︱min. module 1 ︱Control Siemens 840 D PowerLine︱table diameter 1200 mm︱table load 15 t︱total power requirement kW︱weight of the machine ca. 24 t︱dimensions of the machine ca. 6,5 x 4 x 3,75 m︱
          Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - Power clamping device - 2 x fume separator make "3nine" type EMMA - Chip scraper conveyor - Set of adjustable wedges - Dialogue program "Milling in single-part process" - Magnetic roller - Special chip separator - Counterholder sleeve - Holder for oscillating pressure bell - Signal light (3-coloured) - Telephone diagnosis system - Swivelling counter bearing holder - Monitoring devices - Warm-up programme - Network connection (Ethernet) - Dialogue program "Saving shifting data" - Dialogue program "Saving damaged areas" - 19" flat control panel OP 015A - Rinsing gun - Special software for free movement of counterholder - Measuring device for P1200 - Intermediate plate 300 mm for raising the counter support position - Milling arbor 40 mm diameter changed to milling arbor 60 mm - BDE/MDE interface in the machine control cabinet - Oil separation systems 3nine System EMMA Working range and technical data: - Nominal workpiece diameter... 1.200 mm - Gear hobbing approx... 25 mm - Tooth moulding approx... 35 mm Guide values depending on the respective machining task. - Smallest/largest distance between milling cutter and workpiece axis 100/750 mm - Largest axial slide path... 1.000 mm (special design) - Largest clampable hob cutter - Ø... 450 mm - Length... 500 mm - Swivelling range of the milling head... .+ 30/- 45º - Cutter arbour taper... HSK-B160 - (hollow shank taper according to DIN 69063) - Largest milling cutter movement... 450 mm - Table diameter . . . . . . . .. .1.200 mm - Table bore - Ø... 300 mm - Depth... 875 mm - Maximum table load approx... 15.000 kg Workpiece: - Module max. 25 mm (in steel, 600N/mm²), - Module profile milling max. 35 mm, - Ø max. 1.200 mm, Roll milling cutter: - Head circle Ø max. 450 mm, - length max. 500 mm, carriage travel: X/Y/Z - 800 /450 / 1.000 mm, - Milling head swivelling angle +A/-A: 30/15 degrees, - Hydraulic unit, Parker, - filter, Indusa, type DL2500N Jet, Year of manufacture 2015, max. air capacity 2.500 m³/hour.
            max. wheel diameter 1200 mm
            gear width 1000 mm
            max. module 25/36 Modul
            min. module 1
            Control Siemens 840 D PowerLine
            table diameter 1200 mm
            table load 15 t
            weight of the machine ca. 24 t
            dimensions of the machine ca. 6,5 x 4 x 3,75 m
            Description :
            Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and
            worm gears worm gears and all other rolling profiles and shapes that regularly
            occur on the cylindrical workpiece circumference.

            Remark:
            Machine designed for external milling, large milling head M3. Machine with
            counter stand.

            Scope of equipment:
            - Basic machine P 1200, Siemens 840D PowerLine (XP)
            - Motorised milling head M3
            - Special speed series motorised milling head M3
            - Extended software for fault diagnosis
            - Main stand - raised 1000mm
            - Power clamping device
            - 2 x fume separator make "3nine" type EMMA
            - Chip scraper conveyor
            - Set of adjustable wedges
            - Dialogue program "Milling in single-part process"
            - Magnetic roller
            - Special chip separator
            - Counterholder sleeve
            - Holder for oscillating pressure bell
            - Signal light (3-coloured)
            - Telephone diagnosis system
            - Swivelling counter bearing holder
            - Monitoring devices
            - Warm-up programme
            - Network connection (Ethernet)
            - Dialogue program "Saving shifting data"
            - Dialogue program "Saving damaged areas"
            - 19" flat control panel OP 015A
            - Rinsing gun
            - Special software for free movement of counterholder
            - Measuring device for P1200
            - Intermediate plate 300 mm for raising the counter support position
            - Milling arbor 40 mm diameter changed to milling arbor 60 mm
            - BDE/MDE interface in the machine control cabinet
            - Oil separation systems 3nine System EMMA

            Working range and technical data:

            - Nominal workpiece diameter... 1.200 mm
            - Gear hobbing approx... 25 mm
            - Tooth moulding approx... 35 mm

            Guide values depending on the respective machining task.

            - Smallest/largest distance between milling cutter and workpiece axis 100/750 mm
            - Largest axial slide path... 1.000 mm (special design)
            - Largest clampable hob cutter - Ø... 450 mm
            - Length... 500 mm
            - Swivelling range of the milling head... .+ 30/- 45º
            - Cutter arbour taper... HSK-B160 - (hollow shank taper according to DIN 69063)
            - Largest milling cutter movement... 450 mm
            - Table diameter . . . . . . . .. .1.200 mm
            - Table bore - Ø... 300 mm
            - Depth... 875 mm
            - Maximum table load approx... 15.000 kg

            Workpiece:
            - Module max. 25 mm (in steel, 600N/mm²),
            - Module profile milling max. 35 mm,
            - Ø max. 1.200 mm,

            Roll milling cutter:
            - Head circle Ø max. 450 mm,
            - length max. 500 mm, carriage travel: X/Y/Z - 800 /450 / 1.000 mm,
            - Milling head swivelling angle +A/-A: 30/15 degrees,
            - Hydraulic unit, Parker,
            - filter, Indusa, type DL2500N Jet,
            Year of manufacture 2015, max. air capacity 2.500 m³/hour.


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON- PFAUTER P 1200


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03264 · Gear Hobbing Machine - Vertical

          GLEASON- PFAUTER - P 1200 - - 2008 - Simens 840 D PL

          Technical details
          max. wheel diameter 1200 mm︱gear width ca. 800 mm︱max. module 25/35 ︱Control Simens 840 D PL ︱workpiece diameter 1200 mm︱Hobbing approx. 25 mm︱tooth form milling approx. 35 mm︱axial slide travel 1000 mm︱table diameter 1200 mm︱table bore diameter 300 mm︱table load 15000 kg︱total power requirement 110 kW︱weight of the machine ca. 24,5 t︱dimensions of the machine ca. 8,1 x 6,2 x 3,8 m︱
          Equipment/Accessoires: - Motor milling head M3 special speed series - Colum - increased 1. 000 mm - Clamping device - Dialogue program “Milling in single-indexing process” - Telephone diagnostic system - swivelable counter bearing holder - measuring device - machine with counter steady - documentation
            max. wheel diameter 1200 mm
            gear width ca. 800 mm
            max. module 25/35
            Control Simens 840 D PL
            workpiece diameter 1200 mm
            Hobbing approx. 25 mm
            tooth form milling approx. 35 mm
            axial slide travel 1000 mm
            table diameter 1200 mm
            table bore diameter 300 mm
            table load 15000 kg
            total power requirement 110 kW
            weight of the machine ca. 24,5 t
            dimensions of the machine ca. 8,1 x 6,2 x 3,8 m
            Description :
            Equipment/Accessoires:
            - Motor milling head M3 special speed series
            - Colum - increased 1. 000 mm
            - Clamping device
            - Dialogue program “Milling in single-indexing process”
            - Telephone diagnostic system
            - swivelable counter bearing holder
            - measuring device
            - machine with counter steady
            - documentation



        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON- PFAUTER P2000/2400


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03266 · Gear Hobbing Machine - Vertical

          GLEASON- PFAUTER - P2000/2400 - - 2008 - Sinumerik 840 D

          Technical details
          max. wheel diameter 2400 mm︱gear width 600 mm︱max. module 30 ︱Control Sinumerik 840 D ︱workpiece external diameter max. 3400 ︱rim strength max. 500 ︱radial slide travel 1050 mm︱axial slide travel 1600 mm︱swivelling range milling head +- 15 °︱table diameter 1870 mm︱table hole ︱diameter 600 mm︱depth 875 mm︱table load capacity - central/maximum 30000 kg︱workpiece ︱tip circle diameter 440 mm︱root circle dia. min. 310 mm︱cutter width - max. 120 mm︱total power requirement 100 kW︱weight of the machine ca. 37,5 t︱
          machine can be used only for internal gears - dry cutting type Equipment/accessories: - column increased - internal head IKF2 - big clamping table - documentation
            max. wheel diameter 2400 mm
            gear width 600 mm
            max. module 30
            Control Sinumerik 840 D
            workpiece external diameter max. 3400
            rim strength max. 500
            radial slide travel 1050 mm
            axial slide travel 1600 mm
            swivelling range milling head +- 15 °
            table diameter 1870 mm
            diameter 600 mm
            depth 875 mm
            table load capacity - central/ma. 30000 kg
            tip circle diameter 440 mm
            root circle dia. min. 310 mm
            cutter width - max. 120 mm
            total power requirement 100 kW
            weight of the machine ca. 37,5 t
            Description :
            machine can be used only for internal gears - dry cutting type

            Equipment/accessories:
            - column increased
            - internal head IKF2
            - big clamping table
            - documentation


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Hobbing Machine - Vertical GLEASON- PFAUTER PE 1200/1600


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24153 · Gear Hobbing Machine - Vertical

          GLEASON- PFAUTER - PE 1200/1600 - - 1997 - Siemens 840 C

          Technical details
          max. wheel diameter 1600 mm︱gear width 700 mm︱max. module 25 ︱min. module 2 ︱x-axis 875 mm︱z-axis 1000 mm︱control Siemens 840 C︱weight 38 t︱milling arbors HSK-B160 ︱table load 15 to t︱arbor support 900 verfahrbar︱total power requirement 100 kW︱weight of the machine ca. 27 t︱dimensions of the machine ca. 7,9 x 7,4 x 4,0 m︱
          Sonderfräskopf M2 - Max Fräserdurchmesser 350 mm - Max Fräserlänge 375 mm - Max Fräserverschiebung 300 mm
            max. wheel diameter 1600 mm
            gear width 700 mm
            max. module 25
            min. module 2
            x-axis 875 mm
            z-axis 1000 mm
            control Siemens 840 C
            weight 38 t
            milling arbors HSK-B160
            table load 15 to t
            arbor support 900 verfahrbar
            total power requirement 100 kW
            weight of the machine ca. 27 t
            dimensions of the machine ca. 7,9 x 7,4 x 4,0 m
            Description :
            Sonderfräskopf M2
            - Max Fräserdurchmesser 350 mm
            - Max Fräserlänge 375 mm
            - Max Fräserverschiebung 300 mm


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact

          Gear Shaping Machine

          used Gear cutting machines Gear Shaping Machine GLEASON- PFAUTER P 1200 S


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-E23259 · Gear Shaping Machine

          GLEASON- PFAUTER - P 1200 S - - 2008 - Siemens 840D Powerline

          Technical details
          max. wheel diameter 1200 mm︱gear width 350 mm︱max. module 16 ︱min. module 0,5 ︱max. workpiece diameter 1400 mm︱table diameter 1200 mm︱table hole 300 mm︱control Siemens 840D Powerline︱total power requirement 75 kW︱weight of the machine ca. 24 t︱dimensions of the machine ca. 5x3x3,8 m︱
          Gleason-PFAUTER CNC gear shaping machine P 1200 S for the production of internally and externally cylindrical gears with internal and external teeth and other rolling profiles and moulds profiles and moulds that regularly occur on the cylindrical workpiece circumference and for the production of profiles in the single part process. Special version with hydraulic shaping head H1 SCOPE OF EQUIPMENT: - Basic machine P1200S, Siemens 840D Powerline (XP) - Hydraulic shaping head H1 - Signal light (3-colour) - Extended software for fault diagnosis - Telephone diagnosis system - Chip disposal through table bore - Set of adjusting wedges - Monitoring devices - Warm-up programme - Network connection (Ethernet) - 19" flat control panel OP 015A - Offline version "dialogue programming - Vapour separator make "3nine" type KLARA - Machine installation under floor - Rinsing gun - Mounting device - Cutting wheel holder ( 3 pieces ) - Cutting wheel holder for sheep cutting wheels - Cutting wheel holder for sheep cutting wheels - Special cutting wheel holder - Preparation for retrofitting paper belt filter system - Measuring device for machine P 1200 S - Clamping base body - BDE/MDE interface in the machine control cabinet Modification of vapour separator make "3nine" type Klara type EMMA Working range and technical data: Nominal workpiece diameter External toothing. . . . . . . . 1.200 mm Internal gearing. . . . . . . . 1.200 mm Largest workpiece circulation Ø without counter stand... 1.400 mm Nominal machine module approx. - with hydraulic impact head H1... 16 mm Shaping spindle stroke rate range - with hydraulic shaping head H1 max. 80 min-1 Largest toothing width - with hydraulic shaping head H1... 350 mm Smallest pitch height of the hydrostatic screw guide - with hydraulic shaping head H1... 850 mm Smallest/largest distance between tool and workpiece axis - with hydraulic shaping head H1... 0 - 750 mm Axial slide adjustment range - with hydraulic shaping head H1... 1.100 mm Lowest shaping spindle position above table with hydraulic shaping head H1 ** with upper position Shaping stroke... 560 mm Column side offset range - with hydraulic pusher head H1... +/- 50 mm Mould mounting cone - with hydraulic shaping head H1 - HSK-80(hollow shank taper according to DIN 69063) Workpiece with external gearing: - Module max. 16 mm, - max. toothing width 350 mm, - max. external Ø 1.200 mm, Workpiece with internal gearing: - Module max. 16 mm, - max. toothing width 350 mm, - max. circulation Ø 1.400 mm, - max. internal Ø 1.200 mm, - max. shaping wheel Ø 260 mm, - Mounting in shaping spindle HSK-80, - Slide travel; X/Y/Z- 750 /100 / 1.100 mm, Workpiece table: - Outer Ø 1.200 mm, - bore 300 mm, - max. load 150 kN, - Cooling unit, Küma, type OWT600-3KK, year 2008, - Hydraulic unit, manufactured by Parka, - Centrifuge, made by Steimel, - Air filter, Indusa, type EL4001NTDASECL/O, version AOO, max. air capacity 4.000 m³/h
            max. wheel diameter 1200 mm
            gear width 350 mm
            max. module 16
            min. module 0,5
            max. workpiece diameter 1400 mm
            table diameter 1200 mm
            table hole 300 mm
            control Siemens 840D Powerline
            total power requirement 75 kW
            weight of the machine ca. 24 t
            dimensions of the machine ca. 5x3x3,8 m
            Description :
            Gleason-PFAUTER CNC gear shaping machine P 1200 S for the production of
            internally and externally cylindrical gears with internal and external teeth
            and other rolling profiles and moulds profiles and moulds that regularly occur
            on the cylindrical workpiece circumference and for the production of profiles
            in the single part process.

            Special version with hydraulic shaping head H1

            SCOPE OF EQUIPMENT:

            - Basic machine P1200S, Siemens 840D Powerline (XP)
            - Hydraulic shaping head H1
            - Signal light (3-colour)
            - Extended software for fault diagnosis
            - Telephone diagnosis system
            - Chip disposal through table bore
            - Set of adjusting wedges
            - Monitoring devices
            - Warm-up programme
            - Network connection (Ethernet)
            - 19" flat control panel OP 015A
            - Offline version "dialogue programming
            - Vapour separator make "3nine" type KLARA
            - Machine installation under floor
            - Rinsing gun
            - Mounting device
            - Cutting wheel holder ( 3 pieces )
            - Cutting wheel holder for sheep cutting wheels
            - Cutting wheel holder for sheep cutting wheels
            - Special cutting wheel holder
            - Preparation for retrofitting paper belt filter system
            - Measuring device for machine P 1200 S
            - Clamping base body
            - BDE/MDE interface in the machine control cabinet
            Modification of vapour separator make "3nine" type Klara type EMMA

            Working range and technical data:

            Nominal workpiece diameter
            External toothing. . . . . . . . 1.200 mm
            Internal gearing. . . . . . . . 1.200 mm

            Largest workpiece circulation Ø without counter stand... 1.400 mm

            Nominal machine module approx.
            - with hydraulic impact head H1... 16 mm

            Shaping spindle stroke rate range
            - with hydraulic shaping head H1 max. 80 min-1

            Largest toothing width
            - with hydraulic shaping head H1... 350 mm

            Smallest pitch height of the hydrostatic screw guide
            - with hydraulic shaping head H1... 850 mm

            Smallest/largest distance between tool and workpiece axis
            - with hydraulic shaping head H1... 0 - 750 mm

            Axial slide adjustment range - with hydraulic shaping head H1... 1.100 mm
            Lowest shaping spindle position above table with hydraulic shaping head H1
            ** with upper position Shaping stroke... 560 mm

            Column side offset range - with hydraulic pusher head H1... +/- 50 mm
            Mould mounting cone - with hydraulic shaping head H1
            - HSK-80(hollow shank taper according to DIN 69063)

            Workpiece with external gearing:
            - Module max. 16 mm,
            - max. toothing width 350 mm,
            - max. external Ø 1.200 mm,

            Workpiece with internal gearing:
            - Module max. 16 mm,
            - max. toothing width 350 mm,
            - max. circulation Ø 1.400 mm,
            - max. internal Ø 1.200 mm,
            - max. shaping wheel Ø 260 mm,
            - Mounting in shaping spindle HSK-80,
            - Slide travel; X/Y/Z- 750 /100 / 1.100 mm,

            Workpiece table:
            - Outer Ø 1.200 mm,
            - bore 300 mm,
            - max. load 150 kN,
            - Cooling unit, Küma, type OWT600-3KK, year 2008,
            - Hydraulic unit, manufactured by Parka,
            - Centrifuge, made by Steimel,
            - Air filter, Indusa, type EL4001NTDASECL/O,
            version AOO, max. air capacity 4.000 m³/h


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Gear Shaping Machine GLEASON- PFAUTER P 1200 S


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03265 · Gear Shaping Machine

          GLEASON- PFAUTER - P 1200 S - - 2008 - Sinumerik 840 D

          Technical details
          max. wheel diameter 1200 mm︱gear width 350 mm︱max. module 16 ︱control Sinumerik 840 D ︱max. swing diameter 1400 mm︱max. table load 15000 kg︱table bore diameter 300 mm︱table diameter 1200 mm︱total power requirement 150 kW︱weight of the machine ca. 24 t︱dimensions of the machine ca. m︱
          Workpiece with external gearing Largest modulus (in steel with approx. 600N/mm²) 16 mm - Maximum gear width 350 mm - Largest outside diameter 1. 200 mm Workpiece with internal gearing Largest modulu (in steel with approx. 600N/mm²) 16 mm - Maximum gear width 350 mm - Maximum swing diameter 1. 400 mm - Maximum inner diameter 1. 200 mm Tool - Maximum impeller diameter 260 mm - Stroke length 50 mm – 380 mm Equipment/Accessoires: Special version with hydraulic cutting head H1 workpiece diameter: External gears 1. 200 mm Internal gears 1. 200 mm Largest workpiece swing diameter - without steady rest 1. 400 mm Oil mist exhauster „3nine“ type KLARA Cutting wheel holder (3 pieces) Measuring device for machine P 1. 200 S
            max. wheel diameter 1200 mm
            gear width 350 mm
            max. module 16
            control Sinumerik 840 D
            max. swing diameter 1400 mm
            max. table load 15000 kg
            table bore diameter 300 mm
            table diameter 1200 mm
            total power requirement 150 kW
            weight of the machine ca. 24 t
            Description :
            Workpiece with external gearing
            Largest modulus (in steel with approx. 600N/mm²) 16 mm
            - Maximum gear width 350 mm
            - Largest outside diameter 1. 200 mm
            Workpiece with internal gearing
            Largest modulu (in steel with approx. 600N/mm²) 16 mm
            - Maximum gear width 350 mm
            - Maximum swing diameter 1. 400 mm
            - Maximum inner diameter 1. 200 mm
            Tool
            - Maximum impeller diameter 260 mm
            - Stroke length 50 mm – 380 mm

            Equipment/Accessoires:
            Special version with hydraulic cutting head H1
            workpiece diameter:
            External gears 1. 200 mm
            Internal gears 1. 200 mm
            Largest workpiece swing diameter
            - without steady rest 1. 400 mm
            Oil mist exhauster „3nine“ type KLARA
            Cutting wheel holder (3 pieces)
            Measuring device for machine P 1. 200 S



        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • Datasheet
          Request / Contact

          Worm Milling Machine

          used Gear cutting machines Worm Milling Machine GLEASON- PFAUTER P90WM


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24151 · Worm Milling Machine

          GLEASON- PFAUTER - P90WM - - 2009 - Siemens 840D

          Technical details
          workpiece dia. 100 mm︱Control Siemens 840D ︱weight of the machine ca. 5 t︱
          Worm milling head with toothed belt drive. With infinitely variable high-performance drive and maintenance-free bearing. Spindle with hollow shank taper for holding milling arbor with counter bearing. - Workpiece spindle with direct and maintenance-free drive. Equipment: - CNC Siemens 840D - Cooling tank - chip conveyor Product data : - Diameter : 100 mm - Nominal module * hobbing : approx. 3.0 mm * Endless screw milling : approx. 5.0 mm - Max. axial movement : 320 mm - Cutting head orientation : -45 / + 115 ° - Main milling cutter max. diameter : 118 mm - Max. Max. cut-out length of the post cutter : 180 mm - Max. Mill movement ( shifting) : 160 mm - Max. Spindle speed of the workpiece carrier : 3000 t/mm - Min./max. distance between axes : 10/100 mm - Cutting head motor power : 14 kW - Main milling speed : 50-12000 t/mm - Weight : 5000 kg
            workpiece dia. 100 mm
            Control Siemens 840D
            weight of the machine ca. 5 t
            Description :
            Worm milling head with toothed belt drive.
            With infinitely variable high-performance drive and maintenance-free
            bearing. Spindle with hollow shank taper for holding milling arbor with
            counter bearing.
            - Workpiece spindle with direct and maintenance-free drive.

            Equipment:

            - CNC Siemens 840D
            - Cooling tank
            - chip conveyor

            Product data :

            - Diameter : 100 mm
            - Nominal module
            * hobbing : approx. 3.0 mm
            * Endless screw milling : approx. 5.0 mm
            - Max. axial movement : 320 mm
            - Cutting head orientation : -45 / + 115 °
            - Main milling cutter max. diameter : 118 mm
            - Max. Max. cut-out length of the post cutter : 180 mm
            - Max. Mill movement ( shifting) : 160 mm
            - Max. Spindle speed of the workpiece carrier : 3000 t/mm
            - Min./max. distance between axes : 10/100 mm
            - Cutting head motor power : 14 kW
            - Main milling speed : 50-12000 t/mm
            - Weight : 5000 kg



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •