,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          milling machining centers - vertical

          Machinelist: milling machining centers - vertical


          milling machining centers - vertical

          used Milling machines milling machining centers - vertical BRIDGEPORT XR1000


          • Hop Machines
          • Wethouder Lindersstraat 145
          • 5455 GK Wilbertoord
          • Niederlande

          • +31 (0)485478107
          • info@hopmachines.nl
            www.hopmachines.nl
          #2018-5665 · milling machining centers - vertical

          BRIDGEPORT - XR1000 - - 2012 - Heidenhain 530

          Technical details
          x-travel 1020 mm︱y-travel 610 mm︱z-travel 610 mm︱control Heidenhain 530 ︱total power requirement kW︱weight of the machine ca. 7000 kg︱dimensions of the machine ca. m︱
            x-travel 1020 mm
            y-travel 610 mm
            z-travel 610 mm
            control Heidenhain 530
            weight of the machine ca. 7000 kg


        • Hop Machines
        • Wethouder Lindersstraat 145
        • 5455 GK Wilbertoord
        • Niederlande

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical MICROMILL VMC 1600 F


          • Siegfried Volz Werkzeugmaschinen
          • Rüschebrinkstr. 151-153
          • 44143 Dortmund
          • Deutschland

          • +49 (0) 231 3344544
            +49 (0) 231 3344533
          • info@sv-wzm.de
            www.sv-wzm.de
          #2073-III2222 · milling machining centers - vertical

          MICROMILL - VMC 1600 F - - 2012 -

          Technical details
          x-travel 1615 mm︱y-travel 815 mm︱z-travel 725 mm︱table-size 1800 x 800 mm︱total power requirement 15 / 18,5 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. m︱
            x-travel 1615 mm
            y-travel 815 mm
            z-travel 725 mm
            table-size 1800 x 800 mm
            total power requirement 15 / 18,5 kW
            weight of the machine ca. 10 t


        • Siegfried Volz Werkzeugmaschinen
        • Rüschebrinkstr. 151-153
        • 44143 Dortmund
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical DOOSAN Mynx 6500


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9024 · milling machining centers - vertical

          DOOSAN - Mynx 6500 - - 2011 - i-Series Fanuc

          Technical details
          x-travel 1.270 mm︱y-travel 670 mm︱z-travel 625 mm︱control i-Series Fanuc︱Workingspindle: ︱Max. Speed 8.000 min/-1︱drive devices 11 / 15 ︱max. Torque 191 Nm︱tool taper SK / ISO 40 ︱work table: ︱table surface area 1.400 x 670 mm︱T-slots 5 ︱T-slot - width 18H8 mm︱T-slot - distance 125 mm︱max. table load 1.000 kg︱distance spindle nose and table 150 - 775 mm︱max. workpiece height 580 mm︱tool magazin: ︱number of toolpositions 30 pos.︱tool taper SK / ISO 40
          CNC-Machiningcenter Vertical DOOSAN - Mynx 6500
            x-travel 1.270 mm
            y-travel 670 mm
            z-travel 625 mm
            control i-Series Fanuc
            Max. Speed 8.000 min/-1
            drive devices 11 / 15
            max. Torque 191 Nm
            tool taper SK / ISO 40
            table surface area 1.400 x 670 mm
            T-slots 5
            T-slot - width 18H8 mm
            T-slot - distance 125 mm
            max. table load 1.000 kg
            distance spindle nose and table 150 - 775 mm
            max. workpiece height 580 mm
            number of toolpositions 30 pos.
            tool taper SK / ISO 40
            Description :
            CNC-Machiningcenter Vertical
            DOOSAN - Mynx 6500


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical DMG DMC 635 V eco


          • desba TRADING
          • Im Hofgarten 6
          • 61130 Nidderau
          • Deutschland

          • +49 (0)6187 20 30 749
          • info@desba-trading.de
            www.desba-trading.de
          #2072-2081 · milling machining centers - vertical

          DMG - DMC 635 V eco - - 2011 - Siemens

          Technical details
          x-travel 635 mm︱y-travel 510 mm︱z-travel 460 mm︱Control Siemens ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            x-travel 635 mm
            y-travel 510 mm
            z-travel 460 mm
            Control Siemens


        • desba TRADING
        • Im Hofgarten 6
        • 61130 Nidderau
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical HAAS VM-3


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024039 · milling machining centers - vertical

          HAAS - VM-3 - - 2010 - Haas

          Technical details
          x-travel 1016 mm︱y-travel 660 mm︱z-travel 635 mm︱control Haas ︱table surface area 1.370 x 635 mm︱max. table load 1.588 kg︱main spindle: ︱turning speeds 12.000 U/min︱max. torque 102 Nm︱output 22,4 kw︱tool adaptor SK 40 ︱tool changer: ︱number of tool places 24 Pos.︱max. tool diameter 76 mm︱change-time chip to chip 3,6 sec︱change-time tool to tool 2,8 sec︱Feedrate X-,Y-,Z,- axis 18.000 mm/min︱weight of the machine ca. 6,35 t︱dimensions of the machine ca. 3,9 x 2,85 x 3 m︱
          In our opinion, the machine is in very good used condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 1016 mm
            y-travel 660 mm
            z-travel 635 mm
            control Haas
            table surface area 1.370 x 635 mm
            max. table load 1.588 kg
            turning speeds 12.000 U/min
            max. torque 102 Nm
            output 22,4 kw
            tool adaptor SK 40
            number of tool places 24 Pos.
            max. tool diameter 76 mm
            change-time chip to chip 3,6 sec
            change-time tool to tool 2,8 sec
            Feedrate X-,Y-,Z,- axis 18.000 mm/min
            weight of the machine ca. 6,35 t
            dimensions of the machine ca. 3,9 x 2,85 x 3 m
            Description :
            In our opinion, the machine is in very good used condition and can be inspected
            under power by appointment.


            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical MAP LPZ 500


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023198 · milling machining centers - vertical

          MAP - LPZ 500 - - 2010 - Siemens 840 D

          Technical details
          x-travel 500 mm︱y-travel 700 mm︱z-travel 500 mm︱A-axis 240 (-120/+120) °︱C-Axis 360 °︱control Siemens 840 D ︱work table: ︱faceplate diameter 440 mm︱T-slot - width 14 mm︱T-slot - distance 75 mm︱max. table load 400 kg︱main spindle: ︱max. turning speeds 20.000 min/-1︱tool taper HSK 63 A ︱tool magazin: ︱workpiece length 330 mm︱tool diameter 125 mm︱change-time chip to chip 4,5 sec︱weight of the machine ca. 10,5 t︱dimensions of the machine ca. 2,5 x 5,2 x 3,5 m︱
            x-travel 500 mm
            y-travel 700 mm
            z-travel 500 mm
            A-axis 240 (-120/+120) °
            C-Axis 360 °
            control Siemens 840 D
            faceplate diameter 440 mm
            T-slot - width 14 mm
            T-slot - distance 75 mm
            max. table load 400 kg
            max. turning speeds 20.000 min/-1
            tool taper HSK 63 A
            workpiece length 330 mm
            tool diameter 125 mm
            change-time chip to chip 4,5 sec
            weight of the machine ca. 10,5 t
            dimensions of the machine ca. 2,5 x 5,2 x 3,5 m


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical BROTHER TC-R2A


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10204 · milling machining centers - vertical

          BROTHER - TC-R2A - - 2008 -

          Technical details
          x-travel 0480 mm︱y-travel 360 mm︱z-travel 270 mm︱table-size (2x) 600 x 300 mm︱spindle diameter 50 mm︱tool taper BT30 ︱spindle turning speed - stepless 10- 10.000 U/min︱feeds 1- 40000 mm/min︱rapid traverse 40 m/min︱spindle drive 7 kW︱connected load 15 kVA︱weight of the machine ca. 2 t︱dimensions of the machine ca. 1,8 x 1,7 x 2,3 m︱
          Control: Brother. Machine has 14 Position ATC and two tables in alternation.
            x-travel 0480 mm
            y-travel 360 mm
            z-travel 270 mm
            table-size (2x) 600 x 300 mm
            spindle diameter 50 mm
            tool taper BT30
            spindle turning speed - stepless 10- 10.000 U/min
            feeds 1- 40000 mm/min
            rapid traverse 40 m/min
            spindle drive 7 kW
            connected load 15 kVA
            weight of the machine ca. 2 t
            dimensions of the machine ca. 1,8 x 1,7 x 2,3 m
            Description :
            Control: Brother. Machine has 14 Position ATC and two tables in
            alternation.


        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical OKUMA MB-46VAE


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-26528 · milling machining centers - vertical

          OKUMA - MB-46VAE - - 2008 -

          Technical details
          x-travel mm︱y-travel mm︱z-travel mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          table mounting size: 460 x 1000 mm
          movements x/y/z: 762/460/460 mm
          spindle taper: MAS BT 40 ISA
          Lv0jtyg
          min./max. distance table/spindle: 150/610 mm
          spindle turning speed range: 15000 rpm
          number of tool positions: 32 pieces
          spindle drive: 22 kW
          electrical connection: 400 V kW
            Description :
            table mounting size: 460 x 1000 mm

            movements x/y/z: 762/460/460 mm

            spindle taper: MAS BT 40 ISA

            Lv0jtyg

            min./max. distance table/spindle: 150/610 mm

            spindle turning speed range: 15000 rpm

            number of tool positions: 32 pieces

            spindle drive: 22 kW

            electrical connection: 400 V kW


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical QUASER MV 154 PL/12


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-06029 · milling machining centers - vertical

          QUASER - MV 154 PL/12 - - 2008 - HEIDENHAIN, iTNC 530

          Technical details
          x-travel 1020 mm︱y-travel 500 mm︱z-travel 500 mm︱table surface area 1200 x 500 mm︱spindle taper SK 40 ︱spindle turning speed - stepless 40 - 12.000 U/min︱spindle drive 18,5 kW︱feeds 0 - 20.000 mm/min︱rapid traverse 40 m/min︱ATC 30 Pos︱control HEIDENHAIN, iTNC 530 ︱total power requirement 30 kW︱weight of the machine ca. 6,85 t︱dimensions of machine L x W x H 2,47 x 2,54 x 2,83 m︱
          - with coolant through spindle Accessories: 2 hydr. vices make HILMA, model NC 160, width of jaws 160mm; various tool holders, chip conveyor, coolant
            x-travel 1020 mm
            y-travel 500 mm
            z-travel 500 mm
            table surface area 1200 x 500 mm
            spindle taper SK 40
            spindle turning speed - stepless 40 - 12.000 U/min
            spindle drive 18,5 kW
            feeds 0 - 20.000 mm/min
            rapid traverse 40 m/min
            ATC 30 Pos
            control HEIDENHAIN, iTNC 530
            total power requirement 30 kW
            weight of the machine ca. 6,85 t
            dimensions of machine L x W x H 2,47 x 2,54 x 2,83 m
            Description :
            - with coolant through spindle

            Accessories: 2 hydr. vices make HILMA, model NC 160, width of jaws
            160mm;
            various tool holders, chip conveyor, coolant


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical FIRST MCV 1500


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-06043 · milling machining centers - vertical

          FIRST - MCV 1500 - - 2008 - HEIDENHAIN, TNC 530

          Technical details
          x-travel 1500 mm︱y-travel 800 mm︱z-travel 700 mm︱table surface area 1760 x 700 mm︱spindle taper SK 40 ︱spindle turning speed - stepless 8000 U/min︱spindle drive 15 kW︱feeds 1 - 8000 mm/min︱rapid traverse X/Y/Z axis 15 / 15 / 12 m/min︱table load max. 2500 kg︱spindle throat 760 mm︱ATC 40 Pos︱control HEIDENHAIN, TNC 530 ︱total power requirement kW︱weight of the machine ca. 12,5 t︱dimensions of machine L x W x H 4,23 x 2,98 x 2,74 m︱
          - with coolant through spindle Accessories: NC-dividing unit (=4th Axis) with tailstock, center height 250 mm; 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm; various tool holders, chip conveyor, coolant - geometrical overhauled in 2022 - - new ball bearing spindle installed on Y-axis in NOV. 2022 - - the magnetic plates shown on the photo are not included -
            x-travel 1500 mm
            y-travel 800 mm
            z-travel 700 mm
            table surface area 1760 x 700 mm
            spindle taper SK 40
            spindle turning speed - stepless 8000 U/min
            spindle drive 15 kW
            feeds 1 - 8000 mm/min
            rapid traverse X/Y/Z axis 15 / 15 / 12 m/min
            table load max. 2500 kg
            spindle throat 760 mm
            ATC 40 Pos
            control HEIDENHAIN, TNC 530
            weight of the machine ca. 12,5 t
            dimensions of machine L x W x H 4,23 x 2,98 x 2,74 m
            Description :
            - with coolant through spindle

            Accessories: NC-dividing unit (=4th Axis) with tailstock, center height 250 mm;
            2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm;
            various tool holders, chip conveyor, coolant

            - geometrical overhauled in 2022 -
            - new ball bearing spindle installed on Y-axis in NOV. 2022 -

            - the magnetic plates shown on the photo are not included -



        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical MAZAK VTC 300 C-II


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10202 · milling machining centers - vertical

          MAZAK - VTC 300 C-II - - 2008 -

          Technical details
          x-travel 1740 mm︱y-travel 760 mm︱z-travel 660 mm︱table-size 2000 x 760 mm︱spindle diameter 100 mm︱tool taper SK 40 ︱spindle turning speed - stepless 40- 12000 U/min︱feeds 0-30000 mm/min︱rapid traverse 35 mm/min︱electrics - voltage/frequency 400/50 V/Hz︱spindle drive 32 kW︱tool change unit 30 Pos.︱total power requirement 28/48 KVA︱weight of the machine ca. 11,5 t︱dimensions of the machine ca. 4,5 x 3,44 x 3,45 m︱
          CONTROL: MAZATROL 640 M. Machine has cooling arrangement through spindle and outside of the spindle. It has a chip conveyor and a cooling arangement with filter. Machine has a ATC, many tool holders with tools and vices on table.
            x-travel 1740 mm
            y-travel 760 mm
            z-travel 660 mm
            table-size 2000 x 760 mm
            spindle diameter 100 mm
            tool taper SK 40
            spindle turning speed - stepless 40- 12000 U/min
            feeds 0-30000 mm/min
            rapid traverse 35 mm/min
            electrics - voltage/frequency 400/50 V/Hz
            spindle drive 32 kW
            tool change unit 30 Pos.
            total power requirement 28/48 KVA
            weight of the machine ca. 11,5 t
            dimensions of the machine ca. 4,5 x 3,44 x 3,45 m
            Description :
            CONTROL: MAZATROL 640 M.
            Machine has cooling arrangement through spindle and outside of the spindle.
            It has a chip conveyor and a cooling arangement with filter.
            Machine has a ATC, many tool holders with tools and vices on table.


        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical Avia VMC 650


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03813 · milling machining centers - vertical

          Avia - VMC 650 - - 2008 - Heidenhain

          Technical details
          x-travel 650 mm︱y-travel 540 mm︱z-travel 620 mm︱Control Heidenhain ︱type iTNC 530 ︱table surface area 800x540 mm︱Tool changer 20 Pos︱spindle taper ISO 40 ︱turning speeds 50-10.000 U/min︱Cooling through the spindle 20 bar︱workpiece weight 600 kg︱total power requirement 14 kW︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. 2,4x2,1x2,9 m︱
            x-travel 650 mm
            y-travel 540 mm
            z-travel 620 mm
            Control Heidenhain
            type iTNC 530
            table surface area 800x540 mm
            Tool changer 20 Pos
            spindle taper ISO 40
            turning speeds 50-10.000 U/min
            Cooling through the spindle 20 bar
            workpiece weight 600 kg
            total power requirement 14 kW
            weight of the machine ca. 4,2 t
            dimensions of the machine ca. 2,4x2,1x2,9 m


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical KUNZMANN WF 650


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4867 · milling machining centers - vertical

          KUNZMANN - WF 650 - - 2008 -

          Technical details
          Control: Manufacture HEIDENHAIN ︱x-travel 650 mm︱y-travel 500 mm︱z-travel 450 mm︱table surface area 1000x600 mm︱spindle turning speed - stepless 12000 U/min︱voltage 400 V︱dimensions of the machine ca. 3400x3000x2300 mmxmmxmm︱weight of the machine ca. 5.5 t︱
            Control: Manufacture HEIDENHAIN
            x-travel 650 mm
            y-travel 500 mm
            z-travel 450 mm
            table surface area 1000x600 mm
            spindle turning speed - stepless 12000 U/min
            voltage 400 V
            dimensions of the machine ca. 3400x3000x2300 mmxmmxmm
            weight of the machine ca. 5.5 t


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical MAKINO v33i


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-8296K · milling machining centers - vertical

          MAKINO - v33i - - 2008 -

          Technical details
          x-travel 650 mm︱y-travel 450 mm︱z-travel 350 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Main drive Spindle speed range 20000 Tool holder HSK-A63 Number of axes 3 Ikz high pressure Measuring probe
            x-travel 650 mm
            y-travel 450 mm
            z-travel 350 mm
            Description :
            Main drive
            Spindle speed range 20000
            Tool holder HSK-A63
            Number of axes 3
            Ikz high pressure
            Measuring probe


        • Bema Werkzeugmaschinen
        • Hegelstr. 28
        • 73230 Kirchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical MTcut V 110 T


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1594 · milling machining centers - vertical

          MTcut - V 110 T - - 2008 -

          Technical details
          travel -x axis 1.100 mm︱travel -y axis 610 mm︱travel -z axis 610 mm︱table dimension (L x W) 1.250 x 610 mm︱tool adaptor SK40 ︱numbers of positions in the tool changer 30 ︱table diameter 250 mm︱
          Milling machining centers - vertical | MTcut - V 110 T with NC swivel rotary table (TT251HEE08) The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: #Tags: V110T | V-110 T | V-110T | V 110T | V110
            travel -x axis 1.100 mm
            travel -y axis 610 mm
            travel -z axis 610 mm
            table dimension (L x W) 1.250 x 610 mm
            tool adaptor SK40
            numbers of positions in the tool. 30
            table diameter 250 mm
            Description :
            Milling machining centers - vertical | MTcut - V 110 T
            with NC swivel rotary table (TT251HEE08)


            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: #Tags: V110T | V-110 T | V-110T | V 110T | V110


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical FADAL VMC 4020 FX


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-053736 · milling machining centers - vertical

          FADAL - VMC 4020 FX - - 2008 -

          Technical details
          x-travel 1016 mm︱y-travel 508 mm︱z-travel 508 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Fanuc Oi-MC CNC control electronical handwheel 21-fold tool changer coolant device chip tank Technische Daten / technical details: X-Weg / X-travel 1016 mm Y-Weg / Y-travel 508 mm Z-Weg / Z-travel 508 mm Spindelaufnahme / spindle taper SK40 Drehzahl / spindle speed 10000 UpM /rpm Eilgang / rapid feed 25 m/min Tischaufspannfläche / table clamping area 1219x508 mm Werkzeugwechselmagazinplätze / number of tool places in changer 21 Antriebsleistung Spindel / drive capacity spindle 11/17 kW Gewicht ca. / weight ca. 5000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            x-travel 1016 mm
            y-travel 508 mm
            z-travel 508 mm
            Description :
            Fanuc Oi-MC CNC control
            electronical handwheel
            21-fold tool changer
            coolant device
            chip tank

            Technische Daten / technical details:
            X-Weg / X-travel 1016 mm
            Y-Weg / Y-travel 508 mm
            Z-Weg / Z-travel 508 mm
            Spindelaufnahme / spindle taper SK40
            Drehzahl / spindle speed 10000 UpM /rpm
            Eilgang / rapid feed 25 m/min
            Tischaufspannfläche / table clamping area 1219x508 mm
            Werkzeugwechselmagazinplätze / number of tool places in changer 21
            Antriebsleistung Spindel / drive capacity spindle 11/17 kW
            Gewicht ca. / weight ca. 5000 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.





        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical DMG DMU 60 monoBlock


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-103 · milling machining centers - vertical

          DMG - DMU 60 monoBlock - - 2008 - MillPlus HEIDENHAIN

          Technical details
          x-travel 630 mm︱y-travel 560 mm︱z-travel 560 mm︱Control MillPlus HEIDENHAIN︱table dimension - longitudinal 1000 mm︱table dimension - cross 600 mm︱tool adaptor ︱spindle turning speed range 12000 U/min︱Number of axles 4 St.︱rapid traverse 30 m/min︱tool change unit 24 -fach︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          The DMU 60 monoBlock is in very good condition and immediately available. Accessories: - Measuring probe
            x-travel 630 mm
            y-travel 560 mm
            z-travel 560 mm
            Control MillPlus HEIDENHAIN
            table dimension - longitudinal 1000 mm
            table dimension - cross 600 mm
            spindle turning speed range 12000 U/min
            Number of axles 4 St.
            rapid traverse 30 m/min
            tool change unit 24 -fach
            Description :
            The DMU 60 monoBlock is in very good condition and immediately available.
            Accessories:
            - Measuring probe


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical SPINNER VC-650


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-06035 · milling machining centers - vertical

          SPINNER - VC-650 - - 2007 - mit FANUC MANUAL GUIDE

          Technical details
          x-travel 650 mm︱y-travel 500 mm︱z-travel 530 mm︱table surface area 800 x 500 mm︱control FANUC 21 iMB ︱control mit FANUC MANUAL GUIDE ︱spindle turning speed range 60 - 8000 U/min︱spindle taper SK 40 ︱spindle taper DIN 69871 A ︱table load max. 500 kg︱rapid traverse X/Y/Z axis 30 m/min︱ATC 30 Pos︱workpiece diameter at full load 80 mm︱tool diameter if 2 vacant positions 120 mm︱tool length - max. 250 mm︱weight of tools max. 7 kg︱total power requirement 30 kVA︱weight of the machine ca. 4,5 t︱dimensions of machine L x W x H 2,4 x 2,2 x 2,46 m︱
          Accessories: NC-dividing unit with tailstock MECA-DIVIMEK (Spain), DCH 160 C; 2 machine vices, coolant
            x-travel 650 mm
            y-travel 500 mm
            z-travel 530 mm
            table surface area 800 x 500 mm
            control FANUC 21 iMB
            control mit FANUC MANUAL GUIDE
            spindle turning speed range 60 - 8000 U/min
            spindle taper SK 40
            spindle taper DIN 69871 A
            table load max. 500 kg
            rapid traverse X/Y/Z axis 30 m/min
            ATC 30 Pos
            workpiece diameter at full load 80 mm
            tool diameter if 2 vacant positi. 120 mm
            tool length - max. 250 mm
            weight of tools max. 7 kg
            total power requirement 30 kVA
            weight of the machine ca. 4,5 t
            dimensions of machine L x W x H 2,4 x 2,2 x 2,46 m
            Description :
            Accessories: NC-dividing unit with tailstock MECA-DIVIMEK (Spain), DCH 160 C;
            2 machine vices, coolant


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical FIRST V 43


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-06030 · milling machining centers - vertical

          FIRST - V 43 - - 2007 - HEIDENHAIN, TNC 530

          Technical details
          x-travel 1100 mm︱y-travel 600 mm︱z-travel 500 mm︱table surface area 1300 x 600 mm︱spindle taper SK 40 ︱spindle turning speed - stepless 10.000 U/min︱ATC 40 Pos︱control HEIDENHAIN, TNC 530 ︱total power requirement kW︱weight of the machine ca. 8,8 t︱dimensions of machine L x W x H 2,58 x 3,04 x 2,35 m︱
          Accessories: 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm; various tool holders, chip conveyor, coolant
            x-travel 1100 mm
            y-travel 600 mm
            z-travel 500 mm
            table surface area 1300 x 600 mm
            spindle taper SK 40
            spindle turning speed - stepless 10.000 U/min
            ATC 40 Pos
            control HEIDENHAIN, TNC 530
            weight of the machine ca. 8,8 t
            dimensions of machine L x W x H 2,58 x 3,04 x 2,35 m
            Description :
            Accessories: 2 hydr. vices make HILMA, model NC 160, width of jaws
            160 mm;
            various tool holders, chip conveyor, coolant


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical HEDELIUS RS60


          • Hop Machines
          • Wethouder Lindersstraat 145
          • 5455 GK Wilbertoord
          • Niederlande

          • +31 (0)485478107
          • info@hopmachines.nl
            www.hopmachines.nl
          #2018-5673 · milling machining centers - vertical

          HEDELIUS - RS60 - - 2007 - Heidenhain 530

          Technical details
          x-travel 600 mm︱y-travel 620 mm︱z-travel 520 mm︱Control Heidenhain 530 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            x-travel 600 mm
            y-travel 620 mm
            z-travel 520 mm
            Control Heidenhain 530


        • Hop Machines
        • Wethouder Lindersstraat 145
        • 5455 GK Wilbertoord
        • Niederlande

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical KUNZMANN WF 650


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4866 · milling machining centers - vertical

          KUNZMANN - WF 650 - - 2007 -

          Technical details
          Control: Manufacture HEIDENHAIN ︱x-travel 650 mm︱y-travel 500 mm︱z-travel 450 mm︱b-axis -5/+95 °︱table surface area 1000x600 mm︱spindle turning speed - stepless 12000 U/min︱voltage 400 V︱dimensions of the machine ca. 3400x3000x2300 mmxmmxmm︱weight of the machine ca. 5.5 t︱
            Control: Manufacture HEIDENHAIN
            x-travel 650 mm
            y-travel 500 mm
            z-travel 450 mm
            b-axis -5/+95 °
            table surface area 1000x600 mm
            spindle turning speed - stepless 12000 U/min
            voltage 400 V
            dimensions of the machine ca. 3400x3000x2300 mmxmmxmm
            weight of the machine ca. 5.5 t


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical AXA DBZ


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1476 · milling machining centers - vertical

          AXA - DBZ - - 2007 - Siemens 840 D

          Technical details
          travel -x axis 2x 750 mm︱travel -y axis 500 mm︱travel -z axis 600 mm︱control Siemens 840 D ︱turning speeds 30 - 6.000 U/min︱tool taper SK 40 ︱numbers of positions in the tool changer 22 ︱surface area 2x (1.000 x 500) mm︱Dimensions (L x W x H) 4.100 x 2.300 x 2.600 mm︱
          Double-place machining center (shuttle operation) | AXA - DBZ Additional equipment: The machine comes with a 4th axis on each side processing in tack setting. The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:
            travel -x axis 2x 750 mm
            travel -y axis 500 mm
            travel -z axis 600 mm
            control Siemens 840 D
            turning speeds 30 - 6.000 U/min
            tool taper SK 40
            numbers of positions in the tool. 22
            surface area 2x (1.000 x 500) mm
            Dimensions (L x W x H) 4.100 x 2.300 x 2.600 mm
            Description :
            Double-place machining center (shuttle operation) | AXA - DBZ


            Additional equipment:
            The machine comes with a 4th axis on each side processing in tack setting.


            The machine is in very good condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags:


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical MATEC 30L


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-053748 · milling machining centers - vertical

          MATEC - 30L - - 2007 -

          Technical details
          x-travel 2000 mm︱y-travel 600 mm︱z-travel 700 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC control Sinumerik 840D 80-fold automatic tool changer chip conveyor Technische Daten / technical details: X-Weg / X-travel 2000 mm Y-Weg / Y-travel 600 mm Z-Weg / Z-travel 700 mm Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich / spindle speed 20-9000 UpM /rpm Tischaufspannfläche / table clamping area 3000x420 mm Werkzeugwechselmagazinplätze / number of tool places in changer 80 Antriebsleistung Spindel 40%ED / drive capacity spindle 40%ED 15 kW Gewicht ca. / weight 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            x-travel 2000 mm
            y-travel 600 mm
            z-travel 700 mm
            Description :
            CNC control Sinumerik 840D
            80-fold automatic tool changer
            chip conveyor

            Technische Daten / technical details:
            X-Weg / X-travel 2000 mm
            Y-Weg / Y-travel 600 mm
            Z-Weg / Z-travel 700 mm
            Spindelaufnahme / spindle taper HSK 63A
            Drehzahlbereich / spindle speed 20-9000 UpM /rpm
            Tischaufspannfläche / table clamping area 3000x420 mm
            Werkzeugwechselmagazinplätze / number of tool places in changer 80
            Antriebsleistung Spindel 40%ED / drive capacity spindle 40%ED 15 kW
            Gewicht ca. / weight 15000 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.





        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - vertical HAAS VF 5 B / 40 HE


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-5319 · milling machining centers - vertical

          HAAS - VF 5 B / 40 HE - - 2007 - HAAS

          Technical details
          x-travel - mm︱y-travel - mm︱z-travel - mm︱Control HAAS ︱total power requirement - kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. - m︱
            x-travel - mm
            y-travel - mm
            z-travel - mm
            Control HAAS
            total power requirement - kW
            weight of the machine ca. 9 t
            dimensions of the machine ca. - m


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          • 7  
          •   
          •