Double Column Milling M-C - Gantry Type

SD(W)-36|SD(W)-42|SD(W)-4 ︱x-travel 6000/8000/10000/12000/140 mm︱y-travel 3600|4200|4800|5400 mm︱z-travel SD: 1100 mm (1400/1500) S mm︱distance between columns 3650I4250|4850|5450 mm︱w-axis 1500/2000 mm für SD(W) ︱table width 2800|3400|4000|4600 mm︱table length = X-Weg ︱distance spindle nose and table SD: 1080mm ~2180mm (1020m ︱spindle cone SK 50/BT 50 ︱turning speeds 6000 U/min (mehr auf Anfr ︱spindle drive 22/26 kW (mehr auf Anfrag ︱feed speeds X/Y/Z/W: 10/10/10/1 m/min︱machine length 13,5m~43,5 m︱machine width 7,7|8,1|8,5|8,9 m︱Weight approx. 60t+3t/m|65t+3,3t/m|70t+3 ︱automatic tool changer 32-fach ︱CNC controller Siemens/Heidenhain/Fanuc ︱ ︱3 chip conveyor ︱

---

SD(W)-24 | SD(W)-28 | SD( ︱x-travel 6000/8000/10000/12000/140 mm︱y-travel 2400|2800|3200 mm︱z-travel 1100/1400 mm︱distance between columns 2450|2850|3250 mm︱w-axis 1500/2000 mm für SD(W) ︱table width 1600|2000|2400 mm︱table length = X-Weg ︱distance spindle nose and table SD: 1080mm ~2180mm (1020m ︱spindle cone SK 50/BT 50 ︱turning speeds 6000 U/min (mehr auf Anfr ︱spindle drive 22/26 kW (mehr auf Anfrag ︱feed speeds X/Y/Z/W: 12/12/10/1 m/min︱machine length 13,5m~43,5 m︱machine width 6,5|6,9|7,3 m︱Weight approx. 50t+2t/m|53t+2,3t/m|56t+2 ︱automatic tool changer 32-fach ︱CNC controller Siemens/Heidenhain/Fanuc ︱ ︱3 chip conveyor ︱

---

HDT-18|HDT-21|HDT-24 ︱x-travel 2000/4000/6000/8000/10000 mm︱y-travel 1800|2100|2400 mm︱z-travel 800/1000 mm︱distance between columns 1850|2150|2450 mm︱w-axis N/A ︱table width 1200|1500|1800 mm︱table length = X-Weg ︱distance spindle nose and table 555~1355 mm︱spindle cone SK 50/BT 50 ︱turning speeds 6000 U/min (mehr auf Anfr ︱spindle drive 18,5/22 kW (mehr auf Anfr ︱feed speeds X/Y/Z: 15/15/12 m/min︱machine length 6,5~23,5 m︱machine width 5,9|6,2|6,5 m︱Weight approx. 20t+2t/m|22t+2t/m|24t+2,5 ︱automatic tool changer 32-fach ︱CNC controller Siemens/Heidenhain/Fanuc ︱ ︱3 chip conveyor ︱

---

x-travel 2000/4000/6000/8000/10000 mm︱y-travel 1300 mm︱z-travel 800 mm︱distance between columns 1350 mm︱table width 1000 mm︱table length = X-Weg ︱distance spindle nose and table 220~1020 mm︱spindle cone SK 50/BT 50 ︱turning speeds 6000 U/min (mehr auf Anfr ︱spindle drive 18,5/22 kW (mehr auf Anfr ︱feed speeds X/Y/Z: 15/15/12 m/min︱machine length 6,5~23,5 m︱machine width 4,5 m︱Weight approx. 18t+2t/m ︱automatic tool changer 32-fach ︱CNC controller Siemens/Heidenhain/Fanuc/ ︱ ︱3 chip conveyor ︱chip conveyor ︱automatic stepless gear box ︱

---

︱x-travel 3000/4000/5000/6000/8000 mm︱y-travel mm︱z-travel mm︱distance between columns mm︱w-axis ︱table width mm︱table length ︱distance spindle nose and table ︱spindle cone ︱turning speeds ︱spindle drive ︱feed speeds m/min︱machine length m︱machine width m︱Weight approx. ︱automatic tool changer 8 ︱CNC controller ︱ ︱3 chip conveyor ︱

---

x-travel 3.000 mm︱y-travel 1.600 mm︱z-travel 1.200 mm︱control HEIDENHAIN iTNC530 HSCI ︱B-axis (swivelling head) +/- 100 °︱C-axis (milling head rotation axis) +/- 240 °︱feed and rapid traverse : ︱rapid feed Y,X,Z 40.000 m/min︱Rapid traverse B- and C-Axis 50 rpm︱Accelerations (X, Y and Z) 4 m/s²︱Machine table: : ︱Clamping surface 3.500 x 1.750 mm︱T-slots 27 x 22 mm H12 ︱T-slot - distance 125 mm︱max. workpiece load 7.000 kg/m2︱Max. distance table to spindle nose 1.356 mm︱2-Axis Fork Milling Head T21C ︱turning speed range: 10- 24.000 min-1︱Drive power (S1/S6): 42/50 KW︱Torque (S1/S6): 67/84 Nm︱

---

Equipment / Accessories • 5-axis vertical portal milling machine in Gantry design. • Fork milling head T21C for simultaneous milling operation with FISCHER spindle, 42kW, 67Nm, 24.000 rpm, HSK-A63 • Manually operated textile roof • Tool changer chain 50-fold, change orientation vertical • 3D probe for workpiece measurement • Process monitoring system MONTRONIX incl. installed vibration sensors for detection of abnormal vibrations during the machining process. Alarm triggering, feed rate reduction or machine stop are carried out via the control system • HEIDENHAIN HR550 handwheel (wireless) • BLUM LaserControl NT for non-contact tool measurement with automatic cover, enables increased process reliability through automatic form and wear control of the tools used • Coolant system KNOLL for cooling lubrication with supply via spray nozzles and supply through the main spindle (ICS) • TRIMILL Kinematics - application for rotary axes • TRIMILL Teleservice - remote support • Linear, absolute and direct path measuring systems make HEIDENHAIN in X, Y and Z axis with a resolution of 0,001mm • Hydraulic power unit • 1 lubrication unit for the machine • 1 lubrication unit for the milling spindle • 1 cooling unit for cooling the milling head • 1 cooling unit for cooling the axis motors • 1 pc. Air extraction unit for oil and cooling lubricant emulsion with three-stage filtering, power consumption 2.2 kW, max. extraction capacity 2,000 m³. Extraction capacity 2.000 m³/h • 2 scraper belt conveyors, positioned along the X-axis to the left and right of the machine table, discharge height approx. 1,050mm program hours on the machine: approx. 8.000h

x-travel 14000 mm︱y-travel 3100 mm︱z-travel 1.200 mm (220 - 1.420) mm︱distance between columns 4.417 mm︱table-size 14.000 x 2.500 mm︱workpiece weight 15.000 kg/m︱drive capacity - spindle motor 25 kW︱spindle cone 63 HSK︱spindle turning speed range 18000 rpm︱milling feeds 30000 mm/min︱dimensions of the machine ca. 15.000 x 8.418 x 6.033 mm︱weight of the machine ca. 135 t︱MPG hand wheel ︱Machine semi-cover ︱CNC controller SIEMENS 840 D ︱universal milling head 5 Achsen mit “C5C” Elektr ︱automatic tool changer 24 fach︱

---

x-travel 11.450 mm︱y-travel 3.500 mm︱z-travel 1.250 mm︱Control SINUMERIK 840D ︱total power requirement 130 kVA︱weight of the machine ca. 112 t︱dimensions of the machine ca. 22,6 x 8,0 x 6,3 m︱

---

Double Column Milling M/C - Gantry Type Brand: FOREST-LINE ALBERT / Type: MODUMILL 300G / Year of construction: 1999 Extensive modernizations in 2008 and 2021. Machine with interchangeable vertical and horizontal milling heads with automatic indexing. The machine can be inspected by appointment under working condition. Very well-kept, continuously maintained condition! TECHNICAL DATA: - CNC Control: SINUMERIK 840D - Travels X/Y/Z: 11.450 / 3.500 / 1.250 mm Cross-section of the Z-axis slider: 360 x 360 mm - Gantry passage: 3.000 - Height below vertical spindle: 1.400 mm - Working clamping width: 2.500 mm - Fixed table dimensions: 5.000 x 2.500 mm - Longitudinal pallet system EQUIPMENT: - Tool changer (chain magazine): 80-positions - Cooling through the spindle centre - 2 chip conveyors - Gantry panelling - Touch probe, Brand: RENISHAW - Electronic hand wheel - Remote diagnosis - Tool management and wear management - CE marking Electrical connection values: - Total power requirement: 130 kVA - External dimensions of the machine: 22,6 x 8,0 x 6,3 m There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

x-travel 6000 mm︱y-travel 2500 mm︱z-travel 950 mm︱distance between columns 2400 mm︱Height of spindle 1200 mm︱bed width 2115 mm︱bed length 6000 mm︱table load 4 t/m2︱rapid travel x/y/z 10000 mm/min︱feeds infinitely variable 1-3000 mm/min︱Rated capacity of drive motor 20 kW︱Cross cut of slide 320x340 mm︱Positioning increment 2.5 °︱Turning speeds stepless 10-3200 U/min︱Tool tapers ISO 50 ︱tool piece magazine with 20 ︱Control NUM 1060 ︱total power requirement 60 kVA︱dimensions of the machine ca. - m︱weight of the machine ca. - t︱

---

equipped with: - CNC - Control NUM 1060 - ATC with 20 tools(ISO 50) - 2-Axis Milling Head 2,5° x 2,5° - Covering - Cooling through Spindle 15bar - Chip Conveyor

x-travel 16500 mm︱y-travel 6000 mm︱z-travel 600 mm︱w-axis 2915 mm︱surface area 16460 x 4875 mm︱table load 200 t︱distance between columns 5590 mm︱distance table - lower edge spindle 45 - 3580 mm︱spindle diameter 152 mm︱spindle motor 30 kW︱spindle taper ISO 50 ︱spindle turning speed range 25 - 600 U/min︱feed in x - axis 6,3 m/min︱feed in y - axis 3 m/min︱control SIEMENS 840C ︱total power requirement kW︱weight of the machine ca. 300 t︱dimensions of the machine ca. 30 x 10 x 9 m︱

---

- 1995 retrofitted with CNC control SIEMENS 840 C - universal milling heads - 2 milling heads on crossrail with ram-section 420 x 420 mm - crossrail movement by ac motor and with hydr. clamping - measuring system for x- and y-axis via rack/shaft - column movement by double rack/pinion - floor plate

x-travel 600 mm︱y-travel 580 mm︱z-travel 530 mm︱distance spindle center to column 630 mm︱distance spindle center to table 100-600 mm︱milling feed range 1-10.000 mm/min︱max. table load 200/100 kg︱max. tool weight 8 kg︱positioning accuracy +/- 0,01 mm︱ 8000/15000 1/min︱spindle drive 7,5/11,5 /5,5 kW︱repeating accuracy +/- 0,008 mm︱weight of the machine ca. 7,4 / 7,65 t︱

---

Brand-new CNC vertical machining center with CNC control FANUC or HEIDENHAIN Warranty: 12 months More information can be found in the Appendix.

x-travel - mm︱y-travel 1000 (Ständer quer) mm︱z-travel 952 mm︱table-size 1650 (weitere auf Anfrage mm︱table - indexing 0,001 °︱table load 8000 kg︱spindle speeds 3500 1/min︱spindle drive Motorspindel von Cytec CS Nm︱spindle taper 50 BT/SK︱T-slots Radialer Typ 12 Schlitze mm︱milling feed range 5.000 mm/min︱rapid traverse feeds Y/Z/C: 10 / 10 / 4.16 m/min︱diameter of tools max. Ø120 mm︱workpiece length 300 mm︱weight of tools max. 15 kg︱weight of the machine ca. 16 t︱dimensions of the machine ca. s. Katalog m︱CNC controller Siemens 828D ︱cnc rotary table ︱B-axis Fräskopf, 0-180° ︱

---

x-travel 750 mm︱y-travel 600 mm︱z-travel 520 mm︱Control Siemens 840D SL ︱main spindle: ︱max. turning speeds 12.000 min/-1︱drive capacity - main spindle 13/9 kW︱max. torque 83 / 57 Nm︱rotary table: ︱table surface area 800 x 620 mm︱tool changer: ︱tool taper SK40 ︱number of tool places 30 Pos.︱max. tool diameter 80 / 130 mm︱max. tool length 300 mm︱max. tool weight 8 kg︱change-time chip to chip 7,0 / 10,01 sec︱change-time tool to tool ca. 2,7 sec︱Number of T-slots 9 (14H7) Stk.︱T-slot spacing 63 mm︱

---

In our opinion, the machine is in very good used condition Condition and can be viewed under power by appointment. The machine will be available from around August/September. Available in 2024 and still in production. Technical features: - IKZ 12 bar, tank capacity 300 l - Direct position measuring system x, y, z axis - Measuring probe kit PP40 measuring probe, TS27R tool measurement - 3D quickSet Accesories: - chip conveyor - Handwheel ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 650 mm︱y-travel 520 mm︱z-travel 475 mm︱Control HSCI 640 ︱workpiece dia. 630 mm︱workpiece height 600 mm︱handwheel HR-420 ︱ 30 fach︱Internal cooling system 12 bar︱number of spindle speeds 20.000 U/min/rpm︱Machine on 12.435 ︱Spindle hours 4.773 h︱tool adaptor HSK 63 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

CNC brand Siemens ︱CNC model Sinumerik 828D ︱Table length 914 mm︱Table width 500 mm︱X 800 mm︱Y 530 mm︱Z 580 mm︱Spindle taper BT40 ︱Tool changer 30 ︱Minimum speed 8 RPM︱Maximum speed 8.000 RPM︱Maximum palletload 1300 kg︱Power 17 kW︱Machine dimensions 3.100 x 2.300 x 2.550 mm︱Machine weight 5.500 kg︱

---

Brand Romi Machine no F638 Type D800 CNC Brand Siemens CNC Type Sinumerik 828D Year of make 2018 Table length 914 mm Table width 500 mm X 800 mm Y 530 mm Z 580 mm Spindle taper BT40 Speed minimum 8 RPM Speed maximum 8.000 RPM Engine power 17 kW Machine size 3.100 x 2.300 x 2.550 mm Machine weight 5.500 kg Tool magazine positions: 30

x-travel 750 mm︱y-travel 600 mm︱z-travel 520 mm︱Control Siemens 840D SL ︱main spindle: ︱max. turning speeds 12.000 min/-1︱drive capacity - main spindle 13/9 kW︱max. torque 83/57 Nm︱rotary table: ︱table surface area 800 x 620 mm︱tool changer: ︱tool taper SK40 ︱number of tool places 30 Pos.︱max. tool diameter 80/130 mm︱max. tool length 300 mm︱max. tool weight 8 kg︱change-time chip to chip 7,0/10,1 sec︱change-time tool to tool ca. 2,7 sec︱Number of T-slots 9 (14 H7) Stk.︱T-slot spacing 63 mm︱

---

In our opinion, the machine is in very good used condition Condition and can be viewed under power by appointment. The machine will be available from around August/September. Available in 2024 and still in production. The spindle makes noise (see video). The machine has been checked by DMG and maintains accuracy. According to the DMG, no action is required. Technical features: - IKZ 12 bar, tank capacity 300 l - Direct position measuring system x, y, z axis - Measuring probe kit PP40 measuring probe, TS27R tool measurement - 3D quickSet Accesories: - chip conveyor - Handwheel ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 500 mm︱y-travel 450 mm︱z-travel 400 mm︱Control Siemens 840D SL ︱main spindle: ︱max. turning speeds 12.000 min/-1︱drive capacity - main spindle 13/9 kW︱max. torque 82/57 Nm︱rotary table: ︱table surface area 630 x 500 mm︱tool changer: ︱tool taper SK40 ︱number of tool places 16 Pos.︱max. tool diameter 80/130 mm︱max. tool length 300 mm︱max. tool weight 6 kg︱change-time chip to chip 12/15 sec︱change-time tool to tool 9/12 sec︱T-slots (number x width x distance) 7 Stk. / B14 mm / 63 mm mm︱center hole d30 H6 mm︱

---

In our opinion, the machine is in very good used condition Condition and can be viewed under power by appointment. The machine will be available from around August/September. Available in 2024 and still in production. Technical features: - IKZ 12 bar, tank capacity 360 l - ShopMill - Direct position measuring system x, y, z axis - Measuring probe kit PP40 measuring probe, TS27R tool measurement - 3D quickSet - 3+2 axles Accesories: - chip conveyor - Handwheel ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

x-travel 960 mm︱y-travel 600 mm︱z-travel 480 mm︱ 120 / - 42 °︱ 360 °︱table load 200 kg︱Table dimensions 560x365 mm︱Spindle Speed 12000 U/min.︱conus taper BBT 40 mm︱distance spindle /table 100-580 mm︱tool length - max. 300 mm︱weight of tools max. 7 kg︱control HEIDENHAIN ︱weight of the machine ca. 7000 kg︱dimensions of the machine ca. 3100x2200x3070 mm︱

---

5-axis universal machining center Model CNC Heidenhain ITNC 530 Coolant through spindle CTS. Renishaw tool probe. Oil cooler. Equipment/accessories: - IKZ - electr. handwheel - chip conveyor - direct measuring system Operating hours: approx. 9,000 switch-on hours approx. 3,500 spindle hours

x-travel 500 mm︱y-travel 250 mm︱z-travel 400 mm︱table-size RUNDTISCH 250 mm︱spindle taper ISO HSK 63 ︱spindle turning speed range 45 - 12000 U/min︱spindle drive motor 11 kW︱tool change unit 24 ︱CNC-control FANUC OIMD ︱voltage 380 V︱max. table load 200 kg︱throat 380 mm︱coolant ︱total power requirement 17 kVA︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3.5x 2.5x 2,60 m︱

---

AKIRA SEIKI TYPE RMV 250 RT FROM YEAR 2014 - coolant equipment NTROUGHT THE SPINDEL 20 BARS CHIP CONVOYER 5 AXIS MACHINE IN GOOD CONDITION

x-travel 750 mm︱y-travel 550 mm︱z-travel 500 mm︱Control SIEMENS 840D ︱B-axis (table) +-100 °︱c-axis 360 °︱spindle turning speed range 0 - 15000 U/min︱tool taper ISO SK-40 ︱workpiece weight 250 kg︱tool change unit 30 -fach︱rapid traverse 30 m/min︱table dimension - longitudinal 600 mm︱table dimension - cross 600 mm︱total power requirement 26,4 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 3,5 x 2,45 x 2,8 m︱

---

This EMCO MaxxMill 500 machining centre is in good condition. can be inspected at any time by arrangement under chip at the seller. Emco Maxxmill500 built in 2014: Machine hours 20,939 h Spindle hours 6,731 h Operating hours (machining) 5,042 h

CNC brand C-Tek ︱CNC model CNT Series ︱Table length 1.600 mm︱Table width 450 mm︱X 1.500 mm︱Y 650 mm︱Z 620 mm︱Spindle taper ISO40 ︱Tool changer 24 ︱Maximum speed 6.000 RPM︱Machine dimensions 3.000 x 2.800 x 2.600 mm︱Machine weight 5.000 kg︱

---

Brand C-Tek Machine no F654 Type KM-150D CNC Brand C-Tek CNC Type CNT Series Year of make 2014 Table length 1.600 mm Table width 450 mm X 1.500 mm Y 650 mm Z 620 mm Spindle taper ISO40 Speed maximum 6.000 RPM Maximum table load 1.000 kg Machine size 3.000 x 2.800 x 2.600 mm Machine weight 5.000 kg Tool magazine positions: 24

x-travel 750 mm︱y-travel 550 mm︱z-travel 500 mm︱Control SIEMENS 840D ︱tool taper ISO SK-40 ︱tool change unit 30 -fach︱rapid traverse 30 m/min︱table - swivable +/- 100 °︱table rotating 360 °︱table dimension - longitudinal 600 mm︱table dimension - cross 600 mm︱workpiece weight 250 kg︱spindle turning speed range 0-15000 U/min︱total power requirement 26,4 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 3,5 x 2,45 x 2,8 m︱

---

This EMCO MaxxMill 500 machining centre is in good condition. can be inspected at any time by arrangement under chip at the seller. Emco Maxxmill500 Bj. 2012: Maschinenstunden 19.125 h Spindelstunden 4.954 h Betriebsstunden (zerspanen) 3.483 h

x-travel 850 mm︱y-travel 500 mm︱z-travel 610 mm︱Control HEIDENHAIN iTNC 530 ︱handwheel inkl ︱Chip coveyor inkl ︱Internal cooling system 40 bar︱Turn table D 400 mm︱number of spindle speeds 12.000 U/min/rpm︱spindle drive 17/10 kW︱Tools changer 40 fach/tools︱spindle taper ISO SK40 ︱total power requirement 28,5 kW︱weight of the machine ca. 7,7 t︱dimensions of the machine ca. 3 x 2.70 x 3,2 m︱

---

5-axis simultaneous universal machining center NC rotary swivel table D 400mm 3D infrared probe blown air through spindle flush gun direct measurement system

x-travel 600 mm︱y-travel 855 mm︱z-travel 750 mm︱clearance diameter 720 mm︱table surface area 400 x 400 mm︱table rotation speed 50 U/min︱pivoting angle -185 / +45 Grad︱workpiece weight 340 kg︱tool taper HSK-A 63 ︱spindle turning speed - stepless 12000 U/min︱spindle motor 40 kW︱tool diameter 70 mm︱tool length - max. 365 mm︱weight of tools max. 8 kg︱rapid travel range 70/45/90 m/min︱control Heidenhain iTMC 530 ︱total power requirement 54 kVA︱weight of the machine ca. 15 t︱dimensions of the machine ca. 6,1 x 2,47 x 3,17 m︱

---

The 5-axis universal machining center G350 offers nearly unlimited possibilities in the milling of workpieces of various materials. materials. equipped with: - CNC control Heidenhain iTNC 530 - 2-fold Pallet Changer - NC swivel rotary table (A-/B-axis) - tool changer 40 places (HSK A63) - IKZ / coolant system 3-22,5bar - chip conveyor