,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Milling machines

          Machinelist: Milling machines


          milling machining centers - horizontal

          used Milling machines milling machining centers - horizontal TOYODA FH630SX


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1659 · milling machining centers - horizontal

          TOYODA - FH630SX - - 2007 - FANUC31iMA

          Technical details
          number of spindle speeds 6.000 U/min︱tool taper BT50 ︱numbers of positions in the tool changer 121 ︱control FANUC31iMA
          Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000 * 0,001 deg The machine is in a well-maintained condition and can be inspected at any time under power. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX
            number of spindle speeds 6.000 U/min
            tool taper BT50
            numbers of positions in the tool. 121
            control FANUC31iMA
            Description :
            Milling machining centers - horizontal | TOYODA - FH630SX
            equipped with ITC and chip conveyor.


            Additional equipment:
            + Full NC table 360.000 * 0,001 deg


            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            Technical data of the machine will follow soon.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - horizontal TOYODA FH63S


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1660 · milling machining centers - horizontal

          TOYODA - FH63S - - 2000 - FANUC16i

          Technical details
          travel -x axis 1.000 mm︱travel -y axis 850 mm︱travel -z axis 750 mm︱spindle turning speed range 35 - 6.000 U/min︱numbers of positions in the tool changer 60 ︱table dimension - longitudinal 630 x 630 mm︱control FANUC16i
          Milling machining centers - horizontal | TOYODA - FH63S equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000 * 0,001 deg The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630 | FH63 | FH-63 | FH 63
            travel -x axis 1.000 mm
            travel -y axis 850 mm
            travel -z axis 750 mm
            spindle turning speed range 35 - 6.000 U/min
            numbers of positions in the tool. 60
            table dimension - longitudinal 630 x 630 mm
            control FANUC16i
            Description :
            Milling machining centers - horizontal | TOYODA - FH63S
            equipped with ITC and chip conveyor.


            Additional equipment:
            + Full NC table 360.000 * 0,001 deg


            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: FH 630 | FH63 | FH-63 | FH 63


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - horizontal TOYODA Lineam III


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-V0166 · milling machining centers - horizontal

          TOYODA - Lineam III - - - Meldas M650

          Technical details
          x-travel 630 mm︱y-travel 700 mm︱z-travel 630 mm︱Control Meldas M650 ︱tool adaptor HSK-A63 ︱Table dimensions 450x450 mm︱Table load 400 kg︱number of spindle speeds 300 - 20.000 min-1 ︱total power requirement 30 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec.
            x-travel 630 mm
            y-travel 700 mm
            z-travel 630 mm
            Control Meldas M650
            tool adaptor HSK-A63
            Table dimensions 450x450 mm
            Table load 400 kg
            number of spindle speeds 300 - 20.000 min-1
            total power requirement 30 kW
            Description :
            FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Milling machines milling machining centers - horizontal TOYODA Lineam III


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12178M1 · milling machining centers - horizontal

          TOYODA - Lineam III - - - Meldas M650

          Technical details
          x-travel 630 mm︱y-travel 700 mm︱z-travel 630 mm︱Control Meldas M650 ︱tool adaptor HSK-A63 ︱Table dimensions 450x450 mm︱Table load 400 kg︱number of spindle speeds 300 - 20.000 min-1 ︱total power requirement 30 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec.
            x-travel 630 mm
            y-travel 700 mm
            z-travel 630 mm
            Control Meldas M650
            tool adaptor HSK-A63
            Table dimensions 450x450 mm
            Table load 400 kg
            number of spindle speeds 300 - 20.000 min-1
            total power requirement 30 kW
            Description :
            FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec.


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the best selection of used milling machines here
          Milling machines are practical for home or business

          Milling machines are exceptionally versatile tools used to machine a variety of materials, such as metals, woods and synthetics. Milling machines come in a range of sizes from small portable models for home hobbyists to large-scale industrial milling machines for factories. Whether you are looking for vertical or horizontal milling machines, manually operated or computer numerically controlled (CNC), you can find exactly what you need quickly and easily at LagerMaschinen.

          Which milling machine is the best for you?

          Milling machines are generally classified based on the main spindle's orientation. Horizontal milling machines are best suited to heavy materials, bulky or unconventional shaped work pieces, while vertical milling machines offer more advantages for design work and precision cutting. Although some prefer the level of control offered by manually or even mechanically operated machines, some businesses require the efficiency afforded by CNC machines. Regardless of which milling machines best suit your needs, you can find a wide array of used machines at LagerMaschinen.

          Online shopping has never been so easy

          LagerMaschinen offers users a number of distinct advantages. In this day and age, shopping online is a practical solution to strains on a busy schedule. You can browse quickly and easily online, anytime day or night, from the comfort of home or office. Also at LagerMaschinen, you can sort all your searches by price, location or specific brands to save yourself time and money in comparative shopping. From milling machines to grinders to drill presses, you can find the best selection of used machines on the web at LagerMaschinen.