,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Pillar Drilling Machine

          Machinelist: Pillar Drilling Machine


          Pillar Drilling Machine

          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL BC 50 VE


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100024 · Pillar Drilling Machine

          IBERDRILL - BC 50 VE - - NEU -

          Technical details
          bore capacity in steel (diameter) 50 mm︱bore capacity in cast iron (diameter) 60 mm︱threading cutting capacity: M42 ︱throat 360 mm︱bore stroke 200 mm︱spindle taper MK 4 ︱feed range - spindle 0,1-0,2-0,3-0,4 mm/U︱spindle turning speed range 190 - 1900 U/min︱column diameter 175 mm︱table surface area 550 x 550 mm︱total power requirement 4 kW︱weight of the machine ca. 0,85 t︱dimensions of the machine ca. 2,2 x 0,7 x 1,3 m︱
          - large stepless speed range in 3 stages - mechanical speed adjustment with hand lever (model V) - electronic speed adjustment with frequency converter (model VE) - Front digital speed display - Gear lubrication by automatic oil pump “VE” - Machine base plate with integrated coolant device - Machine light - MGI rotating and tilting table - Advance and automatic retraction with electromagnetic clutch - Front hand wheel for fine adjustment of the manual feed - Scale with adjustable drilling depth - Automatic feed reversal when threading - automatic tool ejector - Electric controls integrated in the drill head - EMERGENCY STOP button - Switch for forward/reverse rotation - Height-adjustable chip protection disc with micro switch - CE marking
            bore capacity in steel (diameter. 50 mm
            bore capacity in cast iron (diam. 60 mm
            threading cutting capacity: M42
            throat 360 mm
            bore stroke 200 mm
            spindle taper MK 4
            feed range - spindle 0,1-0,2-0,3-0,4 mm/U
            spindle turning speed range 190 - 1900 U/min
            column diameter 175 mm
            table surface area 550 x 550 mm
            total power requirement 4 kW
            weight of the machine ca. 0,85 t
            dimensions of the machine ca. 2,2 x 0,7 x 1,3 m
            Description :
            - large stepless speed range in 3 stages
            - mechanical speed adjustment with hand lever (model V)
            - electronic speed adjustment with frequency converter (model VE)
            - Front digital speed display
            - Gear lubrication by automatic oil pump “VE”
            - Machine base plate with integrated coolant device
            - Machine light
            - MGI rotating and tilting table
            - Advance and automatic retraction with electromagnetic clutch
            - Front hand wheel for fine adjustment of the manual feed
            - Scale with adjustable drilling depth
            - Automatic feed reversal when threading
            - automatic tool ejector
            - Electric controls integrated in the drill head
            - EMERGENCY STOP button
            - Switch for forward/reverse rotation
            - Height-adjustable chip protection disc with micro switch
            - CE marking


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL Alzstar 40/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010671 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40/SV - - Neu -

          Technical details
          Drilling capacity in St 60 40 mm︱threading in St 60 M 24 mm︱threading in GG 20 M 30 ︱bore stroke 120 mm︱Short spindle MK 3 ︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2 x 14 x 224 mm︱Distance spindle - machine table min./max. 117/701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160-2.250 UpM︱total power requirement 1,45/1,9 kW︱height of the machine 1840 mm︱
          Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting
            Drilling capacity in St 60 40 mm
            threading in St 60 M 24 mm
            threading in GG 20 M 30
            bore stroke 120 mm
            Short spindle MK 3
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514x360 mm
            T-Slots Amount - Width - Distanc. 2 x 14 x 224 mm
            Distance spindle - machine table. 117/701 mm
            feed 0,10 + 0,20 mm/U
            spindle turning speed range 160-2.250 UpM
            total power requirement 1,45/1,9 kW
            height of the machine 1840 mm
            Description :
            Standard equipment:
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Reversing switch for right-left rotation
            - Motor protection switch
            - Speed adjustment stepless
            - Speed display digital
            - Feed overload protection
            - Protection IP 54
            - Connector (fully assembled, cable length 2 m)
            - Spindle protection with electrical protection

            Pos. 25
            Coolant device B, consisting of: separate container (33l),
            Pump with motor protection switch, complete fitting


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine OPTIdrill Tischbohrmaschine DP 26-T (400 V) Set


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7364 · Pillar Drilling Machine

          OPTIdrill Tischbohrmaschine - DP 26-T (400 V) Set - - NEU -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 209 mm︱bore stroke 95 mm︱ 3 ︱Motor output 12 ︱speeds 200 - 2440 U/min︱
          Bench drill / 3020625TSET - Heavy execution of the whole machine - Very smooth running thanks to the new spindle design - industrial engine - Separate emergency stop impact switch - drilling depth stop - LED machine light integrated in the drill head - Precisely machined, stable drilling table with diagonal T-slots with a circumferential cooling water channel - Drilling table can be tilted ± 45 ° and rotated 360 ° - V-belt cover with safety switch - Precision spindle bore - Machine operation of safety electronics in 24 V DC voltage - Guaranteed concentricity = 0.02 mm measured in the drilling spindle - Thick-walled steel column for high force absorption and stability - Solid, large base plate with T-slots scope of delivery - Keyless chuck 0 - 16 mm - T-nuts - Expeller - Adapter MK 3-B16 - operating tool - BMP 100 machine vice
            bore capacity in steel (diameter. 25 mm
            throat 209 mm
            bore stroke 95 mm
            3
            Motor output 12
            speeds 200 - 2440 U/min
            Description :
            Bench drill / 3020625TSET

            - Heavy execution of the whole machine
            - Very smooth running thanks to the new spindle design
            - industrial engine
            - Separate emergency stop impact switch
            - drilling depth stop
            - LED machine light integrated in the drill head
            - Precisely machined, stable drilling table with diagonal T-slots with a
            circumferential cooling water channel
            - Drilling table can be tilted ± 45 ° and rotated 360 °
            - V-belt cover with safety switch
            - Precision spindle bore
            - Machine operation of safety electronics in 24 V DC voltage
            - Guaranteed concentricity = 0.02 mm measured in the drilling spindle
            - Thick-walled steel column for high force absorption and stability
            - Solid, large base plate with T-slots

            scope of delivery
            - Keyless chuck 0 - 16 mm
            - T-nuts
            - Expeller
            - Adapter MK 3-B16
            - operating tool
            - BMP 100 machine vice


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AB 26/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010498 · Pillar Drilling Machine

          ALZMETALL - AB 26/SV - - Neu -

          Technical details
          26 mm︱ 30 mm︱ 30 mm︱ M 20M 24 MK 3120-2.200 U/min.︱throat 293 mm︱ 515x360 mm︱ 2 x 14 x 224 mm︱ 90/675 mm︱column diameter 115 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱Machine height 1865 mm︱total power requirement 1,0/1,6 kW︱
          Standard equipment: - Electromagnetic feed clutch with overload protection and electrical Cross Handle Switches - Main switch lockable - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Speed adjustment stepless - Speed display digital - Protection IP 54 - Motor insulation class "F" - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Tapping power dependent on spindle speed)
            26 mm
            30 mm
            30 mm
            M 20
            M 24
            MK 3
            120-2.200 U/min.
            throat 293 mm
            515x360 mm
            2 x 14 x 224 mm
            90/675 mm
            column diameter 115 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            Machine height 1865 mm
            total power requirement 1,0/1,6 kW
            Description :
            Standard equipment:
            - Electromagnetic feed clutch with overload protection and electrical
            Cross Handle Switches
            - Main switch lockable
            - Motor protection switch
            - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel
            - Speed adjustment stepless
            - Speed display digital
            - Protection IP 54
            - Motor insulation class "F"
            - Spindle protection with electrical protection

            Pos. 20.1
            Tapping device with foot switch, for thread cutting with
            Stop, max. 6 threads / min., (Tapping power dependent on spindle speed)


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AB 34/SV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010652 · Pillar Drilling Machine

          ALZMETALL - AB 34/SV - - Neu -

          Technical details
          34 mm︱ 40 mm︱ 40 mm︱ MK 4100-1.800 U/min.︱throat 300 mm︱ 615x430 mm︱ 2 x 14 x 224 mm︱ 138/688 mm︱column diameter 145 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱Machine height 1865 mm︱total power requirement 1,4/2,2 kW︱
          Standard equipment: - Electromagnetic feed clutch with overload protection and electrical Cross Handle Switches - Main switch lockable - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Speed adjustment stepless - Speed display digital - Protection class IP 54 - Motor insulation class "F" - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads/min., (Tapping power dependent on spindle speed) Pos. 25. Coolant device B, consisting of: separate container (33 l), pump with Motor protection switch, complete fitting
            34 mm
            40 mm
            40 mm
            MK 4
            100-1.800 U/min.
            throat 300 mm
            615x430 mm
            2 x 14 x 224 mm
            138/688 mm
            column diameter 145 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            Machine height 1865 mm
            total power requirement 1,4/2,2 kW
            Description :
            Standard equipment:
            - Electromagnetic feed clutch with overload protection and electrical
            Cross Handle Switches
            - Main switch lockable
            - Motor protection switch
            - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel
            - Speed adjustment stepless
            - Speed display digital
            - Protection class IP 54
            - Motor insulation class "F"
            - Spindle protection with electrical protection

            Pos. 20.1
            Tapping device with foot switch, for thread cutting with
            Stop, max. 6 threads/min., (Tapping power dependent on spindle speed)

            Pos. 25.
            Coolant device B, consisting of: separate container (33 l), pump with
            Motor protection switch, complete fitting


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AB 26 iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010523 · Pillar Drilling Machine

          ALZMETALL - AB 26 iTRONIC - - Neu -

          Technical details
          26 mm︱ 30 mm︱ 30 mm︱threading in St 60 M 20 ︱threading in GG 20 M 24MK 3120-2.200 U/min.︱throat 293 mm︱ 514x360 mm︱ 2 x 14 x 224 mm︱ 90/675 mm︱column diameter 115 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱total power requirement 1,0/1,6 kW︱Machine height 1865 mm︱weight 380 kg︱
          Standard equipment: 7 "" TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical protection - Three separate buttons for clockwise - counterclockwise - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch - Machine oil first filling: oil bottle, loose delivery Pos. 20.5 Foot switch, in addition to the thread cutting device for switching the Spindle direction of rotation in the process Pos. 37.5 Technology computer in the display. The technology computer guides you through the Machining task. Determination of the cutting data using the following parameters: Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint
            26 mm
            30 mm
            30 mm
            threading in St 60 M 20
            threading in GG 20 M 24
            MK 3
            120-2.200 U/min.
            throat 293 mm
            514x360 mm
            2 x 14 x 224 mm
            90/675 mm
            column diameter 115 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            total power requirement 1,0/1,6 kW
            Machine height 1865 mm
            weight 380 kg
            Description :
            Standard equipment:
            7 "" TFT LCD display with touch function: manual input of spindle speed
            Setpoint, actual speed display, integrated drilling depth display with touch
            Zero point transfer, virtual drilling depth scale in the display, machine
            Status displays and warnings in the display, service information, selectable
            User language: DE / EN / FR / ES / IT / NL / RU

            - Thread cutting device, for thread cutting with stop, max. 6th
            Thread / min (thread cutting performance dependent on spindle speed), thread depth
            adjustable via depth stop and in the TFT - LCD display (4 tools)
            - Infinitely variable speed setting by means of an adjusting lever
            - Spindle protection with electrical protection
            - Three separate buttons for clockwise - counterclockwise - stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Right and left rotation by contactor control
            - Control voltage 24 volts
            - Protection class IP 54
            - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black
            - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch
            - Machine oil first filling: oil bottle, loose delivery

            Pos. 20.5
            Foot switch, in addition to the thread cutting device for switching the
            Spindle direction of rotation in the process

            Pos. 37.5
            Technology computer in the display. The technology computer guides you through the
            Machining task. Determination of the cutting data using the following parameters:
            Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AX 3 iTRONIC V


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010654 · Pillar Drilling Machine

          ALZMETALL - AX 3 iTRONIC V - - Neu -

          Technical details
          40 mm︱threading in St 60 M24 ︱threading in GG 20 M30MK 3 ︱spindle stroke 120 mm︱ 160 - 2250 U/min.︱throat 293 mm︱column diameter 115 mm︱ 514 x 360 mm︱ 2 x 14 x 224 mm︱distance spindle /table min. 117 / max. 701 mm︱feed 0,1 + 0,2 mm/U︱height of the machine ca. 1840 mm︱weight of the machine ca. ca. 260 kg︱
          Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6thread/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Feed overload protection - Machine oil initial filling; oil bottle, supplied loose - Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black ***SPECIAL EQUIPMENT*** Item 20.5 FOOT SWITCH in addition to the SPINDLE-CUTTING DEVICE, for switching the direction of spindle rotation during the process Item 25. Coolant device B, consisting of: separate tank (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting
            40 mm
            threading in St 60 M24
            threading in GG 20 M30
            MK 3
            spindle stroke 120 mm
            160 - 2250 U/min.
            throat 293 mm
            column diameter 115 mm
            514 x 360 mm
            2 x 14 x 224 mm
            distance spindle /table min. 117 / max. 701 mm
            feed 0,1 + 0,2 mm/U
            height of the machine ca. 1840 mm
            weight of the machine ca. ca. 260 kg
            Description :
            Standard equipment:
            - 7" TFT LCD display with touch function:
            * Manual input of spindle speed set value
            * Actual speed display
            * Integrated drilling depth display with touch zero point transfer
            * Virtual drilling depth scale in the display
            * Machine status indicators and warnings on the display
            * Service information
            * Selectable operating language: DE/EN/FR/ES/IT/NL/RU
            - Thread cutting device, for thread cutting with stop, max.
            6thread/min (thread cutting capacity depending on spindle speed), thread depth
            adjustable via depth stop and on the TFT LCD display (4 tools)
            - Infinitely variable speed adjustment via adjustment lever
            - Spindle protection with electrical fuse
            - Three separate buttons for clockwise rotation - anticlockwise rotation - stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Clockwise and counter-clockwise rotation via contactor control
            - Control voltage 24 V, protection class IP 54
            - Feed overload protection
            - Machine oil initial filling; oil bottle, supplied loose
            - Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black

            ***SPECIAL EQUIPMENT***

            Item 20.5
            FOOT SWITCH in addition to the SPINDLE-CUTTING DEVICE,
            for switching the direction of spindle rotation during the process

            Item 25.
            Coolant device B, consisting of: separate tank (33 l), pump with motor
            protection switch, complete armature
            motor protection switch, complete fitting


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL B 60


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100022 · Pillar Drilling Machine

          IBERDRILL - B 60 - - NEU -

          Technical details
          bore capacity in steel (diameter) 60 mm︱bore capacity in cast iron (diameter) 70 mm︱threading cutting capacity: M50 ︱throat 420 mm︱bore stroke 260 mm︱spindle taper MK 5 ︱feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U︱spindle turning speed range 64 - 1210 U/min︱transmission ratio 12 Stufen︱column diameter 220 mm︱table surface area 600 x 600 mm︱total power requirement 4 kW︱weight of the machine ca. 0,82 t︱dimensions of the machine ca. 2,7 x 0,7 x 1,2 m︱
          Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * Inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)
            bore capacity in steel (diameter. 60 mm
            bore capacity in cast iron (diam. 70 mm
            threading cutting capacity: M50
            throat 420 mm
            bore stroke 260 mm
            spindle taper MK 5
            feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U
            spindle turning speed range 64 - 1210 U/min
            transmission ratio 12 Stufen
            column diameter 220 mm
            table surface area 600 x 600 mm
            total power requirement 4 kW
            weight of the machine ca. 0,82 t
            dimensions of the machine ca. 2,7 x 0,7 x 1,2 m
            Description :
            Equipment:
            - Gears made of hardened and ground steel
            - Front speed selector lever
            - Gear lubrication by automatic oil pump
            - Integrated coolant device
            - Machine lamp
            - Rotatable and tiltable table
            - Automatic feed with electromagnetic clutch
            - Handwheel for manual fine feed
            - automatic tool ejector
            - Integrated electrical controls in the drill head
            - Pushbutton for EMERGENCY STOP
            - Switch for right / left rotation
            - Height-adjustable chip protection hood with microswitch
            - CE mark
            * Inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL B 50


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100023 · Pillar Drilling Machine

          IBERDRILL - B 50 - - NEU -

          Technical details
          bore capacity in steel (diameter) 50 mm︱bore capacity in cast iron (diameter) 60 mm︱threading cutting capacity: M36 ︱throat 400 mm︱bore stroke 230 mm︱spindle taper MK 4 ︱feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U︱spindle turning speed range 54 - 1032 U/min︱transmission ratio 12 Stufen︱column diameter 200 mm︱table surface area 550 x 550 mm︱total power requirement 3,0 kW︱weight of the machine ca. 0,72 t︱dimensions of the machine ca. 2,6 x 0,6 x 1,2 m︱
          Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)
            bore capacity in steel (diameter. 50 mm
            bore capacity in cast iron (diam. 60 mm
            threading cutting capacity: M36
            throat 400 mm
            bore stroke 230 mm
            spindle taper MK 4
            feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U
            spindle turning speed range 54 - 1032 U/min
            transmission ratio 12 Stufen
            column diameter 200 mm
            table surface area 550 x 550 mm
            total power requirement 3,0 kW
            weight of the machine ca. 0,72 t
            dimensions of the machine ca. 2,6 x 0,6 x 1,2 m
            Description :
            Equipment:
            - Gears made of hardened and ground steel
            - Front speed selector lever
            - Gear lubrication by automatic oil pump
            - Integrated coolant device
            - Machine lamp
            - Rotatable and tiltable table
            - Automatic feed with electromagnetic clutch
            - Handwheel for manual fine feed
            - automatic tool ejector
            - Integrated electrical controls in the drill head
            - Pushbutton for EMERGENCY STOP
            - Switch for right / left rotation
            - Height-adjustable chip protection hood with microswitch
            - CE mark
            * inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AX 3s iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010653 · Pillar Drilling Machine

          ALZMETALL - AX 3s iTRONIC - - NEU -

          Technical details
          bore capacity in steel St 60 25 mm︱Drilling capacity in St 60 30 mm︱threading in St 60 M 16M 20 ︱Short spindle MK 3 ︱spindle stroke 140 mm︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2x14x224 mm︱distance spindle - column min./max. 132/724 mm︱feed von Hand ︱0 stufenlos ︱Spindle Speed 225-4300 U/min.︱engine 1,0/1,6 kW︱voltage 400 V︱
          Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value
            bore capacity in steel St 60 25 mm
            Drilling capacity in St 60 30 mm
            threading in St 60 M 16
            M 20
            Short spindle MK 3
            spindle stroke 140 mm
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514x360 mm
            T-Slots Amount - Width - Distanc. 2x14x224 mm
            distance spindle - column min./m. 132/724 mm
            feed von Hand
            0 stufenlos
            Spindle Speed 225-4300 U/min.
            engine 1,0/1,6 kW
            voltage 400 V
            Description :
            Standard equipment:
            - 7" TFT LCD display with touch function:
            * Manual input of spindle speed set value
            * Actual speed display
            * Integrated drilling depth display with touch zero point transfer
            * Virtual drilling depth scale in the display
            * Machine status indicators and warnings on the display
            * Service information
            * Selectable operating language: DE/EN/FR/ES/IT/NL/RU
            - Thread cutting device, for thread cutting with stop, max.
            6 threads/min (thread cutting capacity depending on spindle speed), thread depth
            adjustable via depth stop and on the TFT LCD display (4 tools)
            - Infinitely variable speed adjustment via adjustment lever
            - Spindle protection with electrical fuse
            - Three separate buttons for clockwise rotation - anticlockwise rotation - stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Clockwise and counter-clockwise rotation via contactor control
            - Control voltage 24 V, protection class IP 54
            - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black

            Item 20.5
            Foot switch in addition to the thread cutting device, for switching the
            direction of spindle rotation in the process.
            direction of rotation during the process

            Item 25.
            Coolant unit B, consisting of: separate container (33 l), pump with motor
            protection switch, complete armature
            motor protection switch, complete fitting

            Item 37.5
            Technology calculator in the display
            The technology calculator guides you through the cutting task Determination of
            the
            cutting data using the following parameters:
            - Manufacturing process
            - Tool diameter
            - Cutting speed
            - Material table
            - Transfer function of the spindle speed as set value


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine KAPEMA BM 25


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08416 · Pillar Drilling Machine

          KAPEMA - BM 25 - - fabrikneu / new -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 255 mm︱bore stroke 135 mm︱spindle turning speed range 8, von 105-2900 U/min︱table-size 500 x 350 mm︱column diameter 100 mm︱spindle taper MK 3 ︱total power requirement 0,65 / 0,9 kW︱weight of the machine ca. 190 kg︱dimensions of the machine ca. 0,5 x 0,5 x 1,7 m︱Electric 380 Volt ︱Drill chuck
          New gear machine, 2-stage right/left rotation, height-adjustable drilling head, Construction principle "Arboga - Sweden", maintenance-free gearbox with helical teeth Wheels, drill head and table are adjustable 360 ??degrees around the column,chip protection with electr. Switch, drilling depth indicator, warranty = 12 months. Machine dealer with own stock of 1600 m².
            bore capacity in steel (diameter. 25 mm
            throat 255 mm
            bore stroke 135 mm
            spindle turning speed range 8, von 105-2900 U/min
            table-size 500 x 350 mm
            column diameter 100 mm
            spindle taper MK 3
            total power requirement 0,65 / 0,9 kW
            weight of the machine ca. 190 kg
            dimensions of the machine ca. 0,5 x 0,5 x 1,7 m
            Description :
            New gear machine, 2-stage right/left rotation, height-adjustable drilling head,
            Construction principle "Arboga - Sweden", maintenance-free gearbox with helical
            teeth Wheels, drill head and table are adjustable 360 ??degrees around the
            column,chip protection with electr. Switch, drilling depth indicator, warranty
            = 12 months.

            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine HUVEMA HU 30 TI


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010068 · Pillar Drilling Machine

          HUVEMA - HU 30 TI - - 2020 -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 320 mm︱bore stroke 135 mm︱spindle turning speed range 72 - 2600 U/min︱thread dia. M 20 mm︱feeds 0,1 - 0,2 - 0,3 mm/U︱spindle taper MT 3 ︱table surface area 370 x 360 mm︱Distance spindle/table max. 850 mm︱distance spindle/base plate 1400 mm︱voltage 400 V / 50 Hz︱total power requirement 1,0 - 1,5 kW︱weight of the machine ca. 0;5 t︱dimensions of the machine ca. 1,2 x 0,7 x 2,3 m︱
          • with cooling device • threading attachment
            bore capacity in steel (diameter. 30 mm
            throat 320 mm
            bore stroke 135 mm
            spindle turning speed range 72 - 2600 U/min
            thread dia. M 20 mm
            feeds 0,1 - 0,2 - 0,3 mm/U
            spindle taper MT 3
            table surface area 370 x 360 mm
            Distance spindle/table max. 850 mm
            distance spindle/base plate 1400 mm
            voltage 400 V / 50 Hz
            total power requirement 1,0 - 1,5 kW
            weight of the machine ca. 0;5 t
            dimensions of the machine ca. 1,2 x 0,7 x 2,3 m
            Description :
            • with cooling device
            • threading attachment


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine HUVEMA HU 40 TI


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010092 · Pillar Drilling Machine

          HUVEMA - HU 40 TI - - 2020 -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 360 mm︱bore stroke 180 mm︱thread dia. M 27 mm︱spindle turning speed range 42 - 2050 U/min︱feeds 0,7-0,15-0,26-0,4 mm/U︱spindle taper MK4 ︱table surface area 450 x 440 mm︱Distance spindle/table max. 600 mm︱distance spindle/base plate 1200 mm︱voltage 400 V / 50 Hz︱total power requirement 2,8 kW︱weight of the machine ca. 0,75 t︱dimensions of the machine ca. 1,2 x 0,7 x 2,2 m︱
          • with cooling device • threading attachment
            bore capacity in steel (diameter. 40 mm
            throat 360 mm
            bore stroke 180 mm
            thread dia. M 27 mm
            spindle turning speed range 42 - 2050 U/min
            feeds 0,7-0,15-0,26-0,4 mm/U
            spindle taper MK4
            table surface area 450 x 440 mm
            Distance spindle/table max. 600 mm
            distance spindle/base plate 1200 mm
            voltage 400 V / 50 Hz
            total power requirement 2,8 kW
            weight of the machine ca. 0,75 t
            dimensions of the machine ca. 1,2 x 0,7 x 2,2 m
            Description :
            • with cooling device
            • threading attachment


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine HUVEMA HU 70 B


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010132 · Pillar Drilling Machine

          HUVEMA - HU 70 B - - 2020 -

          Technical details
          bore capacity in steel (diameter) 70 mm︱throat 420 mm︱bore stroke 260 mm︱no. of turning speeds 12 ︱thread dia. M 50 mm︱spindle turning speed range 51 - 966 U/min︱feeds 0,05 - 0,3 (6x) mm/U︱spindle taper MT 5 ︱table surface area 600 x 600 mm︱Distance spindle/table max. max. 800 mm︱distance spindle/base plate 1200 mm︱column diameter 220 mm︱voltage 400 V / 50 Hz︱total power requirement 5,5 kW︱weight of the machine ca. 850 Kg︱dimensions of the machine ca. 1,2 x 0,7 x 2,4 m︱
          - Gear wheels hardened and ground, - coolant device, - table adjustable, - automatic feed with mechanical clutch, - 2-step motor, - spindle with left-right rotation, - central lubrication, - machine lighting,
            bore capacity in steel (diameter. 70 mm
            throat 420 mm
            bore stroke 260 mm
            no. of turning speeds 12
            thread dia. M 50 mm
            spindle turning speed range 51 - 966 U/min
            feeds 0,05 - 0,3 (6x) mm/U
            spindle taper MT 5
            table surface area 600 x 600 mm
            Distance spindle/table max. max. 800 mm
            distance spindle/base plate 1200 mm
            column diameter 220 mm
            voltage 400 V / 50 Hz
            total power requirement 5,5 kW
            weight of the machine ca. 850 Kg
            dimensions of the machine ca. 1,2 x 0,7 x 2,4 m
            Description :
            - Gear wheels hardened and ground,
            - coolant device,
            - table adjustable,
            - automatic feed with mechanical clutch,
            - 2-step motor,
            - spindle with left-right rotation,
            - central lubrication,
            - machine lighting,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine HUVEMA HU 50-EXO


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010131 · Pillar Drilling Machine

          HUVEMA - HU 50-EXO - - 2020 -

          Technical details
          bore capacity in steel (diameter) 50 mm︱throat 350 mm︱bore stroke 180 mm︱thread dia. M 38 mm︱no. of turning speeds 9 ︱spindle turning speed range 132 - 1852 U/min︱feeds 0,05 - 0,3 (6x) mm/U︱spindle taper MK4 ︱table surface area 480 x 480 mm︱Distance spindle/table max. max. 800 mm︱distance spindle/base plate 1200 mm︱column diameter 150 mm︱voltage 400 V / 50 Hz︱total power requirement 3 kW︱weight of the machine ca. 450 Kg︱dimensions of the machine ca. 1,2 x 0,7 x 2,4 m︱
          • Cooling device, • electric table height adjustment, • electromagnetic feed, • 2 speed motor, • spindle turns clockwise and counter clockwise, • rotating and tilting table, • machine worklight, • table clamped with eccentric clamp, • gear wheel driven.
            bore capacity in steel (diameter. 50 mm
            throat 350 mm
            bore stroke 180 mm
            thread dia. M 38 mm
            no. of turning speeds 9
            spindle turning speed range 132 - 1852 U/min
            feeds 0,05 - 0,3 (6x) mm/U
            spindle taper MK4
            table surface area 480 x 480 mm
            Distance spindle/table max. max. 800 mm
            distance spindle/base plate 1200 mm
            column diameter 150 mm
            voltage 400 V / 50 Hz
            total power requirement 3 kW
            weight of the machine ca. 450 Kg
            dimensions of the machine ca. 1,2 x 0,7 x 2,4 m
            Description :
            • Cooling device,
            • electric table height adjustment,
            • electromagnetic feed,
            • 2 speed motor,
            • spindle turns clockwise and counter clockwise,
            • rotating and tilting table,
            • machine worklight,
            • table clamped with eccentric clamp,
            • gear wheel driven.


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine IBERDRILL Falken AZ 32


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3100018 · Pillar Drilling Machine

          IBERDRILL - Falken AZ 32 - - 2018 -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 300 mm︱bore stroke 150 mm︱ MK 4480 x 480 mm︱ 0,1 - 0,2 mm/U︱ M 22 (St 60)35 mm︱ 80-1170 U/min︱ 1,45 kW︱ 0,34 t︱ 0,8 x 1,0 x 2,0 m︱
          *Exhibition machine, like NEW* (Machine was not yet in use) Accesories: -Machine light (built-in) -Coolant device in the foot (built-in)
            bore capacity in steel (diameter. 32 mm
            throat 300 mm
            bore stroke 150 mm
            MK 4
            480 x 480 mm
            0,1 - 0,2 mm/U
            M 22 (St 60)
            35 mm
            80-1170 U/min
            1,45 kW
            0,34 t
            0,8 x 1,0 x 2,0 m
            Description :
            *Exhibition machine, like NEW*
            (Machine was not yet in use)

            Accesories:
            -Machine light (built-in)
            -Coolant device in the foot (built-in)


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine Huvema HU 25 TK


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-59 · Pillar Drilling Machine

          Huvema - HU 25 TK - - 2001 -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 225 mm︱ ︱total power requirement 0,75 kW︱weight of the machine ca. 0,3 t︱required space 0,7 x 0,7 x 1,8 m︱
            bore capacity in steel (diameter. 25 mm
            throat 225 mm
            total power requirement 0,75 kW
            weight of the machine ca. 0,3 t
            required space 0,7 x 0,7 x 1,8 m


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine MAXION BS 25 ST


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9103738 · Pillar Drilling Machine

          MAXION - BS 25 ST - - 2000 -

          Technical details
          bore capacity in steel (diameter) 25,0 / 30,0 mm︱throat 260 mm︱bore stroke 120 mm︱spindle taper 3 MK︱table: 500 x 350 mm︱T-slots 4x B 14.0 mm︱turning speeds 120 - 2160 U/min︱column diameter 110 mm︱distance spindle /table 90 - 760 mm︱total power requirement 0,7 / 1,3 kW︱weight 260 kg︱range L-W-H 900 x 900 x 1850 mm︱
          ** Machine from a vocational school ** very good condition (!!) TABLE DRILLING MACHINE / DRILLING HEAD HEIGHT ADJUSTABLE WITH CONSTANT TABLE HEIGHT Furnishing: - pole-changing motor - Continuous speed adjustment including analogue speed display - Spindle feed manually via cross handle - Drill head height adjustable, via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Front main switch - Machine base including cabinet door * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9093639
            bore capacity in steel (diameter. 25,0 / 30,0 mm
            throat 260 mm
            bore stroke 120 mm
            spindle taper 3 MK
            table: 500 x 350 mm
            T-slots 4x B 14.0 mm
            turning speeds 120 - 2160 U/min
            column diameter 110 mm
            distance spindle /table 90 - 760 mm
            total power requirement 0,7 / 1,3 kW
            weight 260 kg
            range L-W-H 900 x 900 x 1850 mm
            Description :
            ** Machine from a vocational school
            ** very good condition (!!)

            TABLE DRILLING MACHINE / DRILLING HEAD HEIGHT ADJUSTABLE WITH
            CONSTANT TABLE HEIGHT

            Furnishing:
            - pole-changing motor
            - Continuous speed adjustment including analogue speed display
            - Spindle feed manually via cross handle
            - Drill head height adjustable, via hand crank
            - machined base plate with T-slots
            - adjustable drilling depth stop
            - Front main switch
            - Machine base including cabinet door

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9093639


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL AB 36 SV


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9103755 · Pillar Drilling Machine

          ALZMETALL - AB 36 SV - - 1999 -

          Technical details
          bore capacity in steel (diameter) 36.0 mm︱bore capacity in cast iron 42.0 mm︱throat 230 mm︱morse taper 4 MK︱bore stroke 160 mm︱table: 620 x 470 mm︱turning speeds 295 - 3400 U/min︱feed 0.1 - 0.2 - 0.3 mm/U︱total power requirement 1.4 / 2.2 kW︱weight 470 kg︱range L-W-H 700 x 850 x 1900 mm︱
          ** maintained condition (!!) ** current new price approx. 18.000 euros ** Special price on request Furnishing: - electromagnetic feed clutch * with overload protection and electric cross-grip switch - Mushroom push button (latching) for EMERGENCY STOP, in the front panel - electric stepless speed adjustment - digital speed display - digital drilling depth display * including 0-point definition (start of drilling) - R / L barrel of the drill spindle - Pole-changing drive motor - infinitely adjustable drilling depth stop - Work table with 2x T-slots - height adjustable - Coolant base plate with machined workpiece support surface * incl. pump with motor protection switch * incl. 2x T-slots - Operating instructions in German * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103755
            bore capacity in steel (diameter. 36.0 mm
            bore capacity in cast iron 42.0 mm
            throat 230 mm
            morse taper 4 MK
            bore stroke 160 mm
            table: 620 x 470 mm
            turning speeds 295 - 3400 U/min
            feed 0.1 - 0.2 - 0.3 mm/U
            total power requirement 1.4 / 2.2 kW
            weight 470 kg
            range L-W-H 700 x 850 x 1900 mm
            Description :
            ** maintained condition (!!)
            ** current new price approx. 18.000 euros
            ** Special price on request

            Furnishing:
            - electromagnetic feed clutch
            * with overload protection and electric cross-grip switch
            - Mushroom push button (latching) for EMERGENCY STOP, in the front panel
            - electric stepless speed adjustment
            - digital speed display
            - digital drilling depth display
            * including 0-point definition (start of drilling)
            - R / L barrel of the drill spindle
            - Pole-changing drive motor
            - infinitely adjustable drilling depth stop
            - Work table with 2x T-slots - height adjustable
            - Coolant base plate with machined workpiece support surface
            * incl. pump with motor protection switch
            * incl. 2x T-slots
            - Operating instructions in German

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9103755


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL Alzstar 40


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-6918 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40 - - 1999 -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 293 mm︱bore stroke 120 mm︱bore capacity in cast iron (diameter) 38 mm︱threading cutting capacity: M20/M30 ︱drive capacity - spindle motor 1,9 kW︱spindle taper MT 3 ︱turning speed range 160- 2250 U/min︱column diameter 115 mm︱table surface area 300 x 300 mm︱distance spindle /table 642 mm︱distance spindle/base plate 1207 mm︱dimensions 0,7 x 0,45 x 1,85 m︱weight 260 kg︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Used Pillar Drilling Machine in very good condition. - stepless spindle speed - spindle left/right - Manual tapping (manual change direction of rotation) - Manuel Depth gauge
            bore capacity in steel (diameter. 40 mm
            throat 293 mm
            bore stroke 120 mm
            bore capacity in cast iron (diam. 38 mm
            threading cutting capacity: M20/M30
            drive capacity - spindle motor 1,9 kW
            spindle taper MT 3
            turning speed range 160- 2250 U/min
            column diameter 115 mm
            table surface area 300 x 300 mm
            distance spindle /table 642 mm
            distance spindle/base plate 1207 mm
            dimensions 0,7 x 0,45 x 1,85 m
            weight 260 kg
            Description :
            Used Pillar Drilling Machine in very good condition.

            - stepless spindle speed
            - spindle left/right
            - Manual tapping (manual change direction of rotation)
            - Manuel Depth gauge


        • Klaus Rosenboom GmbH
        • Oppenheimer Str. 19
        • 28307 Bremen

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ALZMETALL ALZSTAR 40 - 1912/S


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3100020 · Pillar Drilling Machine

          ALZMETALL - ALZSTAR 40 - 1912/S - - 1998 -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 293 mm︱bore stroke 120 mm︱ 300 x 300 mm︱ 160 - 2250 U/min︱ 1,45/1,9 kW︱column diameter 115 mm︱spindle taper MT 3260 kg︱ 700 x 850 x 1900 mm︱
            bore capacity in steel (diameter. 40 mm
            throat 293 mm
            bore stroke 120 mm
            300 x 300 mm
            160 - 2250 U/min
            1,45/1,9 kW
            column diameter 115 mm
            spindle taper MT 3
            260 kg
            700 x 850 x 1900 mm
            Description :



        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine FLOTT SB 32 ST


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-032227 · Pillar Drilling Machine

          FLOTT - SB 32 ST - - 1993 -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 300 mm︱bore stroke 150 mm︱bore capacity in cast iron 36 mm︱spindle taper MT 3 ︱spindle turning speed - stepless 140 - 1400 U/min︱table-size 500 x 360 mm︱column diameter 125 mm︱total power requirement 1,5 kW︱weight of the machine ca. 335 kg︱dimensions of the machine ca. 500 x 800 x 1850 mm︱
          The machine comes from a training company and has been maintained more than second hand. The general condition is very good, all functions have been checked. Accesories: - Drill chuck - infinitely variable speeds - lighting
            bore capacity in steel (diameter. 32 mm
            throat 300 mm
            bore stroke 150 mm
            bore capacity in cast iron 36 mm
            spindle taper MT 3
            spindle turning speed - stepless 140 - 1400 U/min
            table-size 500 x 360 mm
            column diameter 125 mm
            total power requirement 1,5 kW
            weight of the machine ca. 335 kg
            dimensions of the machine ca. 500 x 800 x 1850 mm
            Description :
            The machine comes from a training company and has been maintained more than
            second hand.
            The general condition is very good, all functions have been checked.

            Accesories:
            - Drill chuck
            - infinitely variable speeds
            - lighting


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine GILLARDON GK 30 VE


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22079 · Pillar Drilling Machine

          GILLARDON - GK 30 VE - - 1989 -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 300 mm︱bore stroke 150 mm︱cross-moving table 600 x 180 ︱total power requirement 1,5 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 1,0 x 1,0 x 2,2 m︱
            bore capacity in steel (diameter. 30 mm
            throat 300 mm
            bore stroke 150 mm
            cross-moving table 600 x 180
            total power requirement 1,5 kW
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 1,0 x 1,0 x 2,2 m


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Pillar Drilling Machine ADAM ac 22


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-01598 · Pillar Drilling Machine

          ADAM - ac 22 - - 1985 -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 260 mm︱bore stroke 120 mm︱spindle taper MT 3 ︱table-size 500 x 365 mm︱spindle turning speed range 120 - 5160 U/min︱feed range - boring 0,1 / 0,16 / 0,25 mm/U︱voltage 380 V︱total power requirement 0,65 / 1,2 kW︱
            bore capacity in steel (diameter. 30 mm
            throat 260 mm
            bore stroke 120 mm
            spindle taper MT 3
            table-size 500 x 365 mm
            spindle turning speed range 120 - 5160 U/min
            feed range - boring 0,1 / 0,16 / 0,25 mm/U
            voltage 380 V
            total power requirement 0,65 / 1,2 kW


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          • 7  
          •   
          •