,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Machining Center - Vertical

          Machinelist: Machining Center - Vertical


          Machining Center - Vertical

          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical MÜGA (teilueberholt) R4530 (4.Achse)


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20311 · Machining Center - Vertical

          MÜGA (teilueberholt) - R4530 (4.Achse) - - 2008 - MITSUBISHI

          Technical details
          x-travel 450 mm︱y-travel 300 mm︱z-travel 300 mm︱control MITSUBISHI ︱table-size 500 x 320 mm︱max. table load 200 kg︱spindle taper BT 30 ︱spindle turning speed range 240 - 15.000 U/min︱rapid traverse 48 m/min︱drive capacity - spindle motor 3,7 kW︱tool change unit 12 Pos.︱coolant IKZ 50 bar︱voltage 400 V︱total power requirement 26 KW︱weight of the machine ca. 2,1 t︱dimensions of the machine ca. 1,25 x 2,05 x 2,50 m︱band filter unit 1,80 x 0,70 x 1,30 m︱coolant tank 1,20 x 0,90 x 0,50 m︱Spindlecoolant 0,40 x 0,50 x 0,90 m︱Transformer 0,60 x 0,40 x 0,60 m︱
          - serial no.: Q0R1163 - Machine ON: 23.221 h - Control MITSUBISHI - 4th axis - electronic handwheel - Coolant through spindle 50 bar - oil cooler - paper band filter system - various tool holder - mist extraction system Machine was partly reconditioned: New guideways and ball screws in X-/Y- Axis New motor for X-Axis
            x-travel 450 mm
            y-travel 300 mm
            z-travel 300 mm
            control MITSUBISHI
            table-size 500 x 320 mm
            max. table load 200 kg
            spindle taper BT 30
            spindle turning speed range 240 - 15.000 U/min
            rapid traverse 48 m/min
            drive capacity - spindle motor 3,7 kW
            tool change unit 12 Pos.
            coolant IKZ 50 bar
            voltage 400 V
            total power requirement 26 KW
            weight of the machine ca. 2,1 t
            dimensions of the machine ca. 1,25 x 2,05 x 2,50 m
            band filter unit 1,80 x 0,70 x 1,30 m
            coolant tank 1,20 x 0,90 x 0,50 m
            Spindlecoolant 0,40 x 0,50 x 0,90 m
            Transformer 0,60 x 0,40 x 0,60 m
            Description :
            - serial no.: Q0R1163
            - Machine ON: 23.221 h
            - Control MITSUBISHI
            - 4th axis
            - electronic handwheel
            - Coolant through spindle 50 bar
            - oil cooler
            - paper band filter system
            - various tool holder
            - mist extraction system
            Machine was partly reconditioned:
            New guideways and ball screws in X-/Y- Axis
            New motor for X-Axis


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical SAEILO Contur MMV 660/Sinumerik 810 D


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20148 · Machining Center - Vertical

          SAEILO - Contur MMV 660/Sinumerik 810 D - - 2007 -

          Technical details
          x-travel 660 mm︱y-travel 510 mm︱z-travel 560 mm︱CNC-control Sinumerik 810 D ShopMill SIEMENS︱table-size 900 x 485 mm︱max. table load 450 kg︱spindle taper SK 40 ︱spindle turning speed range 8.000 U/min︱feed stepless 1 - 10.000 mm/min︱rapid traverse 20 m/min︱drive capacity - spindle motor 9,25 kW︱tool change unit 20 Pos.︱coolant ︱chip conveyor Spiralförderer ︱voltage 380 V︱total power requirement 11,0 kVA︱weight of the machine ca. 4,6 t︱dimensions of the machine ca. 2,20 x 2,75 x 2,50 m︱
          - Serial-No.: 07010128 - control: Sinumerik 810 D ShopMill - electrical hand wheel - chip conveyor - coolant equipment
            x-travel 660 mm
            y-travel 510 mm
            z-travel 560 mm
            CNC-control Sinumerik 810 D ShopMill SIEMENS
            table-size 900 x 485 mm
            max. table load 450 kg
            spindle taper SK 40
            spindle turning speed range 8.000 U/min
            feed stepless 1 - 10.000 mm/min
            rapid traverse 20 m/min
            drive capacity - spindle motor 9,25 kW
            tool change unit 20 Pos.
            chip conveyor Spiralförderer
            voltage 380 V
            total power requirement 11,0 kVA
            weight of the machine ca. 4,6 t
            dimensions of the machine ca. 2,20 x 2,75 x 2,50 m
            Description :
            - Serial-No.: 07010128
            - control: Sinumerik 810 D ShopMill
            - electrical hand wheel
            - chip conveyor
            - coolant equipment


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical DMG DMC 64 V / iTNC 530 / IKZ


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20170 · Machining Center - Vertical

          DMG - DMC 64 V / iTNC 530 / IKZ - - 2003 -

          Technical details
          x-travel 640 mm︱y-travel 600 mm︱z-travel 500 mm︱CNC-control iTNC 530 HEIDENHAIN︱table-size 850 x 630 mm︱max. table load 600 kg︱spindle taper SK 40 ︱spindle turning speed range 12.000 U/min︱feed stepless 40.000 mm/min︱rapid traverse 60 m/min︱drive capacity - spindle motor 18,0 kW︱tool change unit 30 Pos.︱voltage 400 V︱total power requirement 42 kVA︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 3,45 x 2,35 x 2,90 m︱chip conveyor 3,50 x 1,20 x 1,60 m︱coolant 1,70 x 1,20 x 1,60 m︱
          - serial-no.: 29100004772 - Machine ON: 69,044 h - spindle ON: 34,493 h - Control: HEIDENHAIN iTNC 530 - Blum-Laser tool measurement BLUM-MICRO - electronic hand wheel - Coolant through spindle TSC - Chip conveyor
            x-travel 640 mm
            y-travel 600 mm
            z-travel 500 mm
            CNC-control iTNC 530 HEIDENHAIN
            table-size 850 x 630 mm
            max. table load 600 kg
            spindle taper SK 40
            spindle turning speed range 12.000 U/min
            feed stepless 40.000 mm/min
            rapid traverse 60 m/min
            drive capacity - spindle motor 18,0 kW
            tool change unit 30 Pos.
            voltage 400 V
            total power requirement 42 kVA
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 3,45 x 2,35 x 2,90 m
            chip conveyor 3,50 x 1,20 x 1,60 m
            coolant 1,70 x 1,20 x 1,60 m
            Description :
            - serial-no.: 29100004772
            - Machine ON: 69,044 h
            - spindle ON: 34,493 h
            - Control: HEIDENHAIN iTNC 530
            - Blum-Laser tool measurement
            BLUM-MICRO
            - electronic hand wheel
            - Coolant through spindle TSC
            - Chip conveyor


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical RÖDERS  (HSC) RFM 600/2


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20164 · Machining Center - Vertical

          RÖDERS (HSC) - RFM 600/2 - - 1999 -

          Technical details
          x-travel 600 mm︱y-travel 450 mm︱z-travel 300 mm︱CNC-control Roeders RMS6 ︱table-size 700 x 550 mm︱max. table load 800 kg︱spindle taper ISO ︱spindle turning speed range 42.000 U/min︱feed stepless 0 - 30.000 mm/min︱rapid traverse 30 m/min︱drive capacity - spindle motor 14 kW︱tool change unit Pick-up 18 Pos.︱voltage 400 V︱total power requirement 20 kVA︱weight of the machine ca. 5,2 t︱dimensions of the machine ca. 3,00 x 2,30 x 2,70 m︱
          - Serial No.: 88231-83 - HSC spindle Fischer MFW1230/42 - Dust extraction system
            x-travel 600 mm
            y-travel 450 mm
            z-travel 300 mm
            CNC-control Roeders RMS6
            table-size 700 x 550 mm
            max. table load 800 kg
            spindle turning speed range 42.000 U/min
            feed stepless 0 - 30.000 mm/min
            rapid traverse 30 m/min
            drive capacity - spindle motor 14 kW
            tool change unit Pick-up 18 Pos.
            voltage 400 V
            total power requirement 20 kVA
            weight of the machine ca. 5,2 t
            dimensions of the machine ca. 3,00 x 2,30 x 2,70 m
            Description :
            - Serial No.: 88231-83
            - HSC spindle Fischer MFW1230/42
            - Dust extraction system


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Buy your used vertical machining center from LagerMaschinen.
          A vertical machining center from LagerMaschinen is just what you need.

          A vertical machining center is a tool used in machine shops. As its name indicates the cutters on this machine are vertically oriented. The vertical machining center is ideal for work that involves cutting on one plane or diesinking which is the process of making moulds amongst other things. This type of machining center can be manually or automatically operated. Since the mid 1900s many companies employ a CNC machining center to improve precision. The vertical machining center comes in a wide variety of sizes from small machines that are perfect for hobby machinists to massive machines that fill a room. Regardless of the size machine you need you can be sure to find just the vertical machining center you are looking for at LagerMaschinen.

          LagerMaschinen provides quality machines at bargain prices.

          For many companies – in particular small and new companies - the price of a new vertical machining center can be a burden. Companies involved in milling and machining can trust in LagerMaschinen’s extensive network of experts and professionals: the vertical machine center fulfills rigorous standards ensuring the highest quality possible at a price cheaper that that of a new machine. Businesses involved in moulding and casting need to be sure that their equipment meets safety requirements for materials and operators alike to ensure the best results on the job. With LagerMaschinen by your side you can work with your vertical machining center knowing you have the quality you need at the price you want.