,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          CNC Turning- and Milling Center

          Machinelist: CNC Turning- and Milling Center


          CNC Turning- and Milling Center

          used Lathes CNC Turning- and Milling Center CMZ TA 30 Y


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03927 · CNC Turning- and Milling Center

          CMZ - TA 30 Y - - 2019 - fanuc 32 i

          Technical details
          turning diameter 460 mm︱turning length 750 mm︱control fanuc 32 i ︱swing dia. 760 mm︱rapid power traverse in X-and Z direction 18/24 m/min︱chucking diameter 250 mm︱bar material dia. 66 mm︱spindle drive 42 kW︱spindle speed: 3500 ︱max. torque on the spindle 730 ︱spindle nose ASA 8" A2 ︱turret stations / rotary tool stations 12/12 ︱RPM of rotary tools 80-4000 1/min︱tailstock quill taper MT MK4 ︱tailstock quill stroke 100 mm︱tailstock quill diameter 110 mm︱Tailstock Travel 990 mm︱bearing for center in tailstock spindle ︱total power requirement 70 kVA︱weight of the machine ca. 6.1 t︱
          VERY NICE MACHINE ONLY 1900 SPINDEL HOURS SPINDEL BORE DIA 66 MM TURNING LENG 66 MM C AXIS MOWING TOOLS Y AXIS +40/-40MM FANUC 32 I CHIP CONVOYER
            turning diameter 460 mm
            turning length 750 mm
            control fanuc 32 i
            swing dia. 760 mm
            rapid power traverse in X-and Z . 18/24 m/min
            chucking diameter 250 mm
            bar material dia. 66 mm
            spindle drive 42 kW
            spindle speed: 3500
            max. torque on the spindle 730
            spindle nose ASA 8" A2
            turret stations / rotary tool st. 12/12
            RPM of rotary tools 80-4000 1/min
            tailstock quill taper MT MK4
            tailstock quill stroke 100 mm
            tailstock quill diameter 110 mm
            Tailstock Travel 990 mm
            total power requirement 70 kVA
            weight of the machine ca. 6.1 t
            Description :
            VERY NICE MACHINE ONLY 1900 SPINDEL HOURS
            SPINDEL BORE DIA 66 MM
            TURNING LENG 66 MM
            C AXIS MOWING TOOLS
            Y AXIS +40/-40MM
            FANUC 32 I
            CHIP CONVOYER



        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center CMZ TA 15  15 YS 640


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03820 · CNC Turning- and Milling Center

          CMZ - TA 15 15 YS 640 - - 2019 - FANUC 32 ITB

          Technical details
          turning diameter 400 mm︱turning length 640 mm︱control FANUC 32 ITB ︱bar diameter 52 mm︱travel -x axis 310 mm︱travel -z axis 640 mm︱turning speed range - drive spindle 4500 1/min︱spindle nose JIS A2-6 ︱spindle bore 61 mm︱C-Axis 0,001° ︱spindle bearing diameter 100 mm︱turret head 12 Pos. ︱tool changing time 0,2 sec︱rapid traverse X-axis 30 m/min︱rapid traverse Z-axis 30 m/min︱drive capacity - spindle motor 15/11 kW︱total power requirement 35 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 2,7 x 2,2 x 1,9 m︱
          VERY NICE MACHINE WITH FANUC 32 IT CHIP CONVOYOR SUP SPINDEL BAR FEEDER C AXIS AND Y AXIS + LIVE TOOLS
            turning diameter 400 mm
            turning length 640 mm
            control FANUC 32 ITB
            bar diameter 52 mm
            travel -x axis 310 mm
            travel -z axis 640 mm
            turning speed range - drive spin. 4500 1/min
            spindle nose JIS A2-6
            spindle bore 61 mm
            C-Axis 0,001°
            spindle bearing diameter 100 mm
            turret head 12 Pos.
            tool changing time 0,2 sec
            rapid traverse X-axis 30 m/min
            rapid traverse Z-axis 30 m/min
            drive capacity - spindle motor 15/11 kW
            total power requirement 35 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 2,7 x 2,2 x 1,9 m
            Description :
            VERY NICE MACHINE WITH FANUC 32 IT
            CHIP CONVOYOR
            SUP SPINDEL
            BAR FEEDER
            C AXIS AND Y AXIS + LIVE TOOLS


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center CMZ TL 25 Y


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03967 · CNC Turning- and Milling Center

          CMZ - TL 25 Y - - 2012 - FANUC 31 A

          Technical details
          turning diameter 510 mm︱turning length 676 mm︱control FANUC 31 A ︱turning speeds 670 U/min︱rapid traverse 24 m/min︱workpiece weight 600 kg︱thread pitch max. 400 mm︱total power requirement 30 kW︱weight of the machine ca. 5.8 t︱dimensions of the machine ca. m︱
          4 AXIS CNC LATHE WHIT Y AXIS LIVE TOOLS 1 disc turret with 12 position, , cylinder shaft, 1 tailstock, , hydr. clamping CONTROL FANUC 31I A
            turning diameter 510 mm
            turning length 676 mm
            control FANUC 31 A
            turning speeds 670 U/min
            rapid traverse 24 m/min
            workpiece weight 600 kg
            thread pitch max. 400 mm
            total power requirement 30 kW
            weight of the machine ca. 5.8 t
            Description :
            4 AXIS CNC LATHE WHIT Y AXIS LIVE TOOLS

            1 disc turret with 12 position, , cylinder shaft, 1 tailstock, , hydr. clamping
            CONTROL FANUC 31I A


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center CMZ TB 67 M


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03751 · CNC Turning- and Milling Center

          CMZ - TB 67 M - - 2008 - Fanuc 32 I MANUEL GUIDE

          Technical details
          turning diameter 385 mm︱turning length 400 mm︱control Fanuc 32 I MANUEL GUIDE ︱spindle bore diameter 73 mm︱number of controlled axis 3 ︱turning speed range 20 - 4.000 U/min︱power requirement 17 kW︱rapid speed 30 m/min︱number of tapers in turret head 12 ︱number of driven tools in turret 12 ︱Spindel speed of driven tools 4000 U/min︱Spindelpower on driven tool 6 kW︱tail stock Ja ︱weight 4 t︱
          CNC-Lathe with driven tools, short magazin barfeeder and partscatcher in very good condition. Equipment: - chipconveyor - 3-jaw-chuck - some toolholders JAPANES - 6 x driven toolholder - partscatcher - Touch setter WITHOUT BAR FEEDER
            turning diameter 385 mm
            turning length 400 mm
            control Fanuc 32 I MANUEL GUIDE
            spindle bore diameter 73 mm
            number of controlled axis 3
            turning speed range 20 - 4.000 U/min
            power requirement 17 kW
            rapid speed 30 m/min
            number of tapers in turret head 12
            number of driven tools in turret 12
            Spindel speed of driven tools 4000 U/min
            Spindelpower on driven tool 6 kW
            tail stock Ja
            weight 4 t
            Description :
            CNC-Lathe with driven tools, short magazin barfeeder and partscatcher in very
            good condition.
            Equipment:
            - chipconveyor
            - 3-jaw-chuck

            - some toolholders JAPANES
            - 6 x driven toolholder
            - partscatcher
            - Touch setter
            WITHOUT BAR FEEDER



        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center CMZ TL 20 ms


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03961 · CNC Turning- and Milling Center

          CMZ - TL 20 ms - - 2007 - FANUC 18 IT

          Technical details
          turning diameter 400 mm︱turning length 840 mm︱control FANUC 18 IT ︱bar diameter 66 mm︱travel -x axis 210 mm︱travel -z axis 840 mm︱turning speed range - drive spindle 40-5000 1/min︱spindle nose JIS A2-6 ︱spindle bore 66 mm︱C-Axis 0,001° ︱spindle bearing diameter 110 mm︱turret head 12 Pos. ︱tool changing time 0,2 sec︱rapid traverse X-axis 18 m/min︱rapid traverse Z-axis 24 m/min︱drive capacity - spindle motor 15/11 kW︱total power requirement 35 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 2,7 x 2,2 x 1,9 m︱
          VERY NICE MACHINE WITH FANUC 18 IT cHIP CONVOYOR HP POMPE C AXIS AND LIVE TOOLS sup spindel
            turning diameter 400 mm
            turning length 840 mm
            control FANUC 18 IT
            bar diameter 66 mm
            travel -x axis 210 mm
            travel -z axis 840 mm
            turning speed range - drive spin. 40-5000 1/min
            spindle nose JIS A2-6
            spindle bore 66 mm
            C-Axis 0,001°
            spindle bearing diameter 110 mm
            turret head 12 Pos.
            tool changing time 0,2 sec
            rapid traverse X-axis 18 m/min
            rapid traverse Z-axis 24 m/min
            drive capacity - spindle motor 15/11 kW
            total power requirement 35 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 2,7 x 2,2 x 1,9 m
            Description :
            VERY NICE MACHINE WITH FANUC 18 IT
            cHIP CONVOYOR
            HP POMPE
            C AXIS AND LIVE TOOLS
            sup spindel



        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center CMZ TL 25 A SM


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03944 · CNC Turning- and Milling Center

          CMZ - TL 25 A SM - - 2007 - FANUC 31 ITB

          Technical details
          turning diameter 510 mm︱turning length 640 mm︱control FANUC 31 ITB ︱bar diameter 66 mm︱travel -x axis 240 mm︱travel -z axis 640 mm︱turning speed range - drive spindle 4000 1/min︱spindle nose JIS A2-6 ︱spindle bore 66 mm︱C-Axis 0,001° ︱spindle bearing diameter 110 mm︱turret head 12 Pos. ︱Driven Tools 12 Pos. ︱tool changing time 0,2 sec︱rapid traverse X-axis 18 m/min︱rapid traverse Z-axis 24 m/min︱drive capacity - spindle motor 19/14 kW︱power capacity - milling spindle 14/8 kW︱total power requirement 35 kW︱weight of the machine ca. 5.7 t︱
          VERY NICE MACHINE WITH FANUC 32 IT WITH SOME LIVE TOOLS SUP SPINDEL HP POMPE C AXIS AND LIVE TOOLS
            turning diameter 510 mm
            turning length 640 mm
            control FANUC 31 ITB
            bar diameter 66 mm
            travel -x axis 240 mm
            travel -z axis 640 mm
            turning speed range - drive spin. 4000 1/min
            spindle nose JIS A2-6
            spindle bore 66 mm
            C-Axis 0,001°
            spindle bearing diameter 110 mm
            turret head 12 Pos.
            Driven Tools 12 Pos.
            tool changing time 0,2 sec
            rapid traverse X-axis 18 m/min
            rapid traverse Z-axis 24 m/min
            drive capacity - spindle motor 19/14 kW
            power capacity - milling spindle 14/8 kW
            total power requirement 35 kW
            weight of the machine ca. 5.7 t
            Description :
            VERY NICE MACHINE WITH FANUC 32 IT
            WITH SOME LIVE TOOLS
            SUP SPINDEL
            HP POMPE
            C AXIS AND LIVE TOOLS


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          A CNC Turning and Milling Center from LagerMaschinen
          A CNC turning and milling center from LagerMaschinen - good for business

          A CNC turning and milling center from LagerMaschinen will certainly be a great advantage to your small or medium-sized business. Choose from a CNC turning and milling center that fits your needs exactly. A CNC turning and milling center uses either one of multiple axes to calibrate and work wood metal or other hard materials. When purchasing a CNC turning and milling center from LagerMaschinen you'll be able to ensure quality control as well as to speak directly with sellers. Let LagerMaschinen's qualified experts assist you in your search for your next business machine.

          CNC turning and milling center from LagerMaschinen

          A CNC turning and milling center (also known as a lathe) can be used for many different purposes. No matter what your end product a CNC turning and milling center from LagerMaschinen is just what you need. Used machines are more economically viable as well as kinder to the environment. A CNC turning and milling center from LagerMaschinen could be the logical solution for your production concerns. By purchasing your CNC turning and milling center through LagerMaschinen and its team of experts and professionals you'll not only find precisely what you're looking for but will also ensure that it lasts for a lifetime.

          CNC turning and milling center - the most logical choice

          No matter what type of CNC turning and milling center you're looking for LagerMaschinen has what you need. Log on create and account and start shopping at LagerMaschinen today.