,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Vertical Turning Machine

          Machinelist: Vertical Turning Machine


          Vertical Turning Machine

          used Lathes Vertical Turning Machine DOOSAN Puma V 8300 R


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20257 · Vertical Turning Machine

          DOOSAN - Puma V 8300 R - - 2019 - Fanuc 0i-TF

          Technical details
          turning diameter 830 mm︱swing diameter 920 mm︱turning height 690 mm︱control Fanuc 0i-TF ︱travel -x axis 495 mm︱travel -z axis 780 mm︱turning speed range - spindle 1940 U/min︱drive capacity - spindle motor 37 / 30 kW︱chucking diameter 380 mm︱turret (x-stations) 12 pos︱rapid traverse X-axis 20 m/min︱rapid traverse Z-axis 20 m/min︱feed mm/min︱spindle diameter in front bearing 160 mm︱c-axis 360° (in 0,001°) ︱workpiece weight 870 kg︱total power requirement 61,78 kVA︱weight of the machine ca. 9,5 t︱dimensions of the machine ca. 2,1 x 2,7 x 3,6 m︱
          - Control unit FANUC 0i-TF - Tool Turret 12-fold - Coolant system - Foot switch - Automatic safety switch Front door & full enclosure - Work area lighting - Chip Conveyor
            turning diameter 830 mm
            swing diameter 920 mm
            turning height 690 mm
            control Fanuc 0i-TF
            travel -x axis 495 mm
            travel -z axis 780 mm
            turning speed range - spindle 1940 U/min
            drive capacity - spindle motor 37 / 30 kW
            chucking diameter 380 mm
            turret (x-stations) 12 pos
            rapid traverse X-axis 20 m/min
            rapid traverse Z-axis 20 m/min
            spindle diameter in front bearin. 160 mm
            c-axis 360° (in 0,001°)
            workpiece weight 870 kg
            total power requirement 61,78 kVA
            weight of the machine ca. 9,5 t
            dimensions of the machine ca. 2,1 x 2,7 x 3,6 m
            Description :
            - Control unit FANUC 0i-TF
            - Tool Turret 12-fold
            - Coolant system
            - Foot switch
            - Automatic safety switch Front door & full enclosure
            - Work area lighting
            - Chip Conveyor



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine EMAG VL2


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1644 · Vertical Turning Machine

          EMAG - VL2 - - 2014 -

          Technical details
          max. turning diameter 160 mm︱max. turning height 150 mm︱max. workpiece diameter 100 mm︱max. workpiece height 150 mm︱max. turning speeds 6.000 U/min︱travel -x axis 700 mm︱travel -z axis 375 mm︱c-axis 360 °︱
          Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2
            max. turning diameter 160 mm
            max. turning height 150 mm
            max. workpiece diameter 100 mm
            max. workpiece height 150 mm
            max. turning speeds 6.000 U/min
            travel -x axis 700 mm
            travel -z axis 375 mm
            c-axis 360 °
            Description :
            Vertical Turning Machine | EMAG - VL2


            equipped with a workpiece conveyor belt.


            The machine is in very good condition.

            Please note that the technical details
            were added from comparable machines.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VL-2 | VL 2


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine EMAG VL 7


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2022033 · Vertical Turning Machine

          EMAG - VL 7 - - 2014 - Siemens 840DSL

          Technical details
          Control Siemens 840DSL ︱max. swing diameter 420 mm︱max. turning height 300 mm︱main spindle: ︱max. turning speeds 3400 min/-1︱drive capacity - main spindle 45 / 35 kW︱max. torque 775 / 600 Nm︱chucking diameter 315 / 400 mm︱tool turret: ︱number of tool places 12 Pos.︱Shank diameter 40 mm︱travel: ︱x-axis 850 mm︱z-axis 315 mm︱feeds: ︱rapid traverse (x/z) 45 / 30 m/min︱weight of the machine ca. 10,0 t︱dimensions of the machine ca. 4,2 x 1,5 x 3,5 m︱
          In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical features: - driven tools - c-axis - Capacity for pieces diameter 30 to 160 mm : 32 [pos] - Capacity for pieces diameter 120 to 220 mm : 24 [pos] - Capacity for pieces diameter 120 to 340 mm : 16 [pos] The scope of delivery of the machine does not include a clamping device. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            Control Siemens 840DSL
            max. swing diameter 420 mm
            max. turning height 300 mm
            max. turning speeds 3400 min/-1
            drive capacity - main spindle 45 / 35 kW
            max. torque 775 / 600 Nm
            chucking diameter 315 / 400 mm
            number of tool places 12 Pos.
            Shank diameter 40 mm
            x-axis 850 mm
            z-axis 315 mm
            rapid traverse (x/z) 45 / 30 m/min
            weight of the machine ca. 10,0 t
            dimensions of the machine ca. 4,2 x 1,5 x 3,5 m
            Description :
            In our opinion, the machine is in very good used condition
            and can be inspected under power by appointment.

            Technical features:
            - driven tools
            - c-axis
            - Capacity for pieces diameter 30 to 160 mm : 32 [pos]
            - Capacity for pieces diameter 120 to 220 mm : 24 [pos]
            - Capacity for pieces diameter 120 to 340 mm : 16 [pos]

            The scope of delivery of the machine does not include a clamping device.

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine EMAG VL2


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1646 · Vertical Turning Machine

          EMAG - VL2 - - 2014 -

          Technical details
          max. turning diameter 160 mm︱max. turning height 150 mm︱max. workpiece diameter 100 mm︱max. workpiece height 150 mm︱max. turning speeds 6.000 U/min︱travel -x axis 700 mm︱travel -z axis 375 mm︱c-axis 360 °︱
          Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2
            max. turning diameter 160 mm
            max. turning height 150 mm
            max. workpiece diameter 100 mm
            max. workpiece height 150 mm
            max. turning speeds 6.000 U/min
            travel -x axis 700 mm
            travel -z axis 375 mm
            c-axis 360 °
            Description :
            Vertical Turning Machine | EMAG - VL2


            equipped with a workpiece conveyor belt.


            The machine is in very good condition.

            Please note that the technical details
            were added from comparable machines.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VL-2 | VL 2


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine WEISSER Vertor M1


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17847 · Vertical Turning Machine

          WEISSER - Vertor M1 - - 2012 - SINUMERIK 840 D

          Technical details
          turning diameter 450 mm︱x-axis 330 mm︱z-axis 650 mm︱Control SINUMERIK 840 D ︱tailstock travel 880 mm︱spindle bearing diameter 150 mm︱speed spindle max. 5.000 U/min.︱toolpiece turning speed range 12.000 U/min︱rated current 102 A︱total power requirement 42 kW︱weight of the machine ca. 22 t︱dimensions of the machine ca. 6,5 x 3,8 x 3,1 m︱
          Equipment List attached
            turning diameter 450 mm
            x-axis 330 mm
            z-axis 650 mm
            Control SINUMERIK 840 D
            tailstock travel 880 mm
            spindle bearing diameter 150 mm
            speed spindle max. 5.000 U/min.
            toolpiece turning speed range 12.000 U/min
            rated current 102 A
            total power requirement 42 kW
            weight of the machine ca. 22 t
            dimensions of the machine ca. 6,5 x 3,8 x 3,1 m
            Description :
            Equipment List attached


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine EMAG VTC 250 DUO


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023026 · Vertical Turning Machine

          EMAG - VTC 250 DUO - - 2012 - Siemens 840 SL

          Technical details
          turning diameter 140 mm︱turning length 630 mm︱control Siemens 840 SL ︱max. swing diameter over bed 250 mm︱main spindle: ︱turning speed range - main spindle 0 - 5000 min/-1︱max. torque 256 Nm︱spindle bearing diameter 110 mm︱spindle bore 52 mm︱spindle head Gr. 6 DIN 55026 ︱chucking diameter max. 250 mm︱tool turret: ︱number of tool places 3 x 12 Pos.︱tool taper VDI 40 ︱max. tool weight 20 kg︱max. tool diameter 40 mm︱max. tool length 95 mm︱max. workpiece weight 20 kg︱max. workpiece diameter 140 mm︱travel:
          In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features: - Siemens S120 drive systems - 3x turret, all places AGW, 2x of them with y - axis - 2x main spindle, 1x with tailstock - Spindles total 5 pcs. - Tool monitoring, Artis - Total electronic axes: 21 pcs. Accesories: - chip conveyor - Radio probe, Renishaw - Cooling unit - Infeed and outfeed conveyor - suction There are 2 identical machines available. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            turning diameter 140 mm
            turning length 630 mm
            control Siemens 840 SL
            max. swing diameter over bed 250 mm
            turning speed range - main spind. 0 - 5000 min/-1
            max. torque 256 Nm
            spindle bearing diameter 110 mm
            spindle bore 52 mm
            spindle head Gr. 6 DIN 55026
            chucking diameter max. 250 mm
            number of tool places 3 x 12 Pos.
            tool taper VDI 40
            max. tool weight 20 kg
            max. tool diameter 40 mm
            max. tool length 95 mm
            max. workpiece weight 20 kg
            max. workpiece diameter 140 mm
            Description :
            In our opinion, the machine is in good used condition and can be inspected
            under power by appointment.

            Technical features:
            - Siemens S120 drive systems
            - 3x turret, all places AGW, 2x of them with y - axis
            - 2x main spindle, 1x with tailstock
            - Spindles total 5 pcs.
            - Tool monitoring, Artis
            - Total electronic axes: 21 pcs.

            Accesories:
            - chip conveyor
            - Radio probe, Renishaw
            - Cooling unit
            - Infeed and outfeed conveyor
            - suction

            There are 2 identical machines available.

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine FELSOMAT FTC180


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023040 · Vertical Turning Machine

          FELSOMAT - FTC180 - - 2012 - Siemens

          Technical details
          turning diameter 320 mm︱turning height 750 mm︱Control Siemens ︱main spindle: ︱max. turning speeds 4500 min/-1︱drive capacity - main spindle 26,8 / 20,9 kW︱max. torque 256 / 200 Nm︱spindle bore 52 mm︱spindle head KK A6 (DIN 55026) ︱chucking diameter max. 315 mm︱tool turret: ︱number of tool places 8 Pos.︱tool taper Capto C5 ︱max. workpiece diameter 50 mm︱max. workpiece weight 0,5 kg︱travel: ︱x-axis 450 mm︱z-axis 300 mm︱feeds: ︱rapid traverse x 45 / z 40 m/min︱
          In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            turning diameter 320 mm
            turning height 750 mm
            Control Siemens
            max. turning speeds 4500 min/-1
            drive capacity - main spindle 26,8 / 20,9 kW
            max. torque 256 / 200 Nm
            spindle bore 52 mm
            spindle head KK A6 (DIN 55026)
            chucking diameter max. 315 mm
            number of tool places 8 Pos.
            tool taper Capto C5
            max. workpiece diameter 50 mm
            max. workpiece weight 0,5 kg
            x-axis 450 mm
            z-axis 300 mm
            rapid traverse x 45 / z 40 m/min
            Description :
            In our opinion, the machine is in very good condition
            condition and can be inspected under power by appointment.

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine WEISSER Univertor AC-1 R CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18521 · Vertical Turning Machine

          WEISSER - Univertor AC-1 R CNC - - 2011 - SINUMERIK 840D SL

          Technical details
          turning diameter 150 mm︱turning length - mm︱turning height - mm︱control SINUMERIK 840D SL ︱x-axis 830 mm︱z-axis 180 mm︱rapid power traverse in X-and Z direction 30 / 60 m/min︱turning speeds 4500 U/min︱spindle head A6 ︱spindle motor 27 kW︱spindle bearing diameter 90 mm︱circle diameter 670 mm︱chucking diameter 210 mm︱total power requirement 36 kVA︱weight of the machine ca. 8 t︱dimensions of the machine ca. 2,5 x 2,5 x 2,6 m︱
          multifunctional, single-spindle Pick-up lathe with vertical spindle Slide arrangement. - CNC control Siemens 840D SL - C axis - Chip conveyor - cooling unit - Feeding - disc turret with tool drive 12-fold 2 identic units available
            turning diameter 150 mm
            turning length - mm
            turning height - mm
            control SINUMERIK 840D SL
            x-axis 830 mm
            z-axis 180 mm
            rapid power traverse in X-and Z . 30 / 60 m/min
            turning speeds 4500 U/min
            spindle head A6
            spindle motor 27 kW
            spindle bearing diameter 90 mm
            circle diameter 670 mm
            chucking diameter 210 mm
            total power requirement 36 kVA
            weight of the machine ca. 8 t
            dimensions of the machine ca. 2,5 x 2,5 x 2,6 m
            Description :
            multifunctional, single-spindle Pick-up lathe with vertical spindle
            Slide arrangement.

            - CNC control Siemens 840D SL
            - C axis
            - Chip conveyor
            - cooling unit
            - Feeding
            - disc turret with tool drive 12-fold

            2 identic units available


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine KONRAD SEIDLER Vertimaxx 3000


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9124 · Vertical Turning Machine

          KONRAD SEIDLER - Vertimaxx 3000 - - 2010 - 840 D ShopTurn Siemens

          Technical details
          faceplate diameter 3.000 mm︱swing diameter 3.200 mm︱turning height 2.200 mm︱Control 840 D ShopTurn Siemens︱cross rail adjustment 1.500 mm︱tool travel 1.250 mm︱faceplate turning speed range 0 - 120 U/min︱power capacity 75 kW︱Driven Tool Stations: ︱speeds 10 - 3.000 U/min︱output 22 kW︱max. Torque 320 Nm︱tool adaptor HSK 160 (VDI 60)︱tool magazin: ︱number of toolpositions 16 pos.︱weight of tools max. 25 kg︱total power requirement - kW︱weight of the machine ca. 36 t︱dimensions of the machine ca. 6,0 x 6,0 x 3,5 m︱Chip conveyor
          Vertical Turning Machine KONRAD SEIDLER - Vertimaxx 3000 - including clamping material, various tool holders - 1x angle bore and milling head 90° Drive spindle according to SEIDLER HSK 160B Output spindle ABS 63 Gear ratio i 1:1 Max. speed 2300 rpm (continuous operation: 2000 rpm) Torque max. 360Nm Cooling type: Input: through cone Output: external and internal cooling - 1x axial drilling and milling head Drive spindle according to SEIDLER HSK 160B Output spindle ABS 80 Gear ratio i 2:1 Max. spindle speed N 1600 rpm Max. spindle torque 800 Nm Cooling type: Input: through cone Output: external and internal cooling - 1x axial drilling and milling head Drive spindle according to SEIDLER HSK 160B Output spindle ABS 63 Gear ratio i 1:1 Max. speed N 3200 rpm Max. torque 500 Nm Cooling type: Input: through cone Output: external and internal cooling - Version with water-cooled drive motor for the face plate drive including cooler - Reinforced cross beam, with reinforced lifting spindles and worm gears roller rail guides in Version MR 65 below MR 55, driving. Schneeberger Installation of a counterweight approx. 4.5 t. with chain guide - Face plate bearing with reinforced bearing. 3 Bearing with KRW thrust bearing - large. Additional king bearing FAG NNU 4972 SK and thrust bearing 51148 M P - Ram stroke extended to 1250 mm - Stand height, expanded to 4200 mm = workpiece height 2200 mm - 1x faceplate, steel version, 3000 mm diameter - 1x set of claw boxes with 4 pieces of hardened clamping jaws - HCR cabin with 4 sliding doors, Cover height above the face plate 2000 mm, maximum door opening approx. 3400 mm The tool changer is completely enclosed - Coolant device Includes a POSITECH (Swiss made) belt filter system made of stainless steel 2x pieces of coolant pumps for high and low pressure Tool - internal cooling - Chip clearing system Cross conveyor and 2 pieces going to the rear, Drive. RUEZ as an articulated belt conveyor, discharge height above the ground 1200 mm, Lowering from the ground (1400 mm) - Control extension, Siemens ShopTurn - NO heavy machining, only one-shift operation
            faceplate diameter 3.000 mm
            swing diameter 3.200 mm
            turning height 2.200 mm
            Control 840 D ShopTurn Siemens
            cross rail adjustment 1.500 mm
            tool travel 1.250 mm
            faceplate turning speed range 0 - 120 U/min
            power capacity 75 kW
            speeds 10 - 3.000 U/min
            output 22 kW
            max. Torque 320 Nm
            tool adaptor HSK 160 (VDI 60)
            number of toolpositions 16 pos.
            weight of tools max. 25 kg
            total power requirement - kW
            weight of the machine ca. 36 t
            dimensions of the machine ca. 6,0 x 6,0 x 3,5 m
            Description :
            Vertical Turning Machine
            KONRAD SEIDLER - Vertimaxx 3000

            - including clamping material, various tool holders

            - 1x angle bore and milling head 90°
            Drive spindle according to SEIDLER HSK 160B
            Output spindle ABS 63
            Gear ratio i 1:1
            Max. speed 2300 rpm (continuous operation: 2000 rpm)
            Torque max. 360Nm
            Cooling type: Input: through cone
            Output: external and internal cooling

            - 1x axial drilling and milling head
            Drive spindle according to SEIDLER HSK 160B
            Output spindle ABS 80
            Gear ratio i 2:1
            Max. spindle speed N 1600 rpm
            Max. spindle torque 800 Nm
            Cooling type: Input: through cone
            Output: external and internal cooling

            - 1x axial drilling and milling head
            Drive spindle according to SEIDLER HSK 160B
            Output spindle ABS 63
            Gear ratio i 1:1
            Max. speed N 3200 rpm
            Max. torque 500 Nm
            Cooling type: Input: through cone
            Output: external and internal cooling


            - Version with water-cooled drive motor
            for the face plate drive including cooler

            - Reinforced cross beam, with reinforced lifting spindles
            and worm gears roller rail guides in
            Version MR 65 below MR 55, driving. Schneeberger
            Installation of a counterweight approx. 4.5 t. with chain guide

            - Face plate bearing with reinforced bearing.
            3 Bearing with KRW thrust bearing - large.
            Additional king bearing FAG NNU 4972 SK and thrust bearing 51148 M P

            - Ram stroke extended to 1250 mm

            - Stand height, expanded to 4200 mm = workpiece height 2200 mm

            - 1x faceplate, steel version, 3000 mm diameter

            - 1x set of claw boxes with 4 pieces of hardened clamping jaws

            - HCR cabin with 4 sliding doors,
            Cover height above the face plate 2000 mm,
            maximum door opening approx. 3400 mm
            The tool changer is completely enclosed

            - Coolant device
            Includes a POSITECH (Swiss made) belt filter system made of stainless steel
            2x pieces of coolant pumps for high and low pressure
            Tool - internal cooling

            - Chip clearing system
            Cross conveyor and 2 pieces going to the rear,
            Drive. RUEZ as an articulated belt conveyor, discharge height above the ground 1200 mm,
            Lowering from the ground (1400 mm)

            - Control extension, Siemens ShopTurn

            - NO heavy machining, only one-shift operation


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine FAMAR Ergo400


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-18018 · Vertical Turning Machine

          FAMAR - Ergo400 - - 2009 - SIEMENS 840 D

          Technical details
          turning diameter 320 mm︱turning height 180 mm︱Control SIEMENS 840 D ︱chucking diameter 315 mm︱0 4.000 U/min︱ 1.000 / 280 mm︱rapid power traverse in X-and Z direction 60/30 m/min︱tool turret with 12 work positions VDI 50 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter 320 mm
            turning height 180 mm
            Control SIEMENS 840 D
            chucking diameter 315 mm
            0 4.000 U/min
            1.000 / 280 mm
            rapid power traverse in X-and Z . 60/30 m/min
            tool turret with 12 work positio. VDI 50


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine EMAG VTC 250 DUO


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17859 · Vertical Turning Machine

          EMAG - VTC 250 DUO - - 2008 - SIN840 PL

          Technical details
          turning diameter max. 140 mm︱swing diameter Futter / Chuck Ø 250 mm︱turning height 630 mm︱Control SIN840 PL ︱spindle turning speed - stepless 1 - 5.000 U/min︱power capacity at 40 % load 38,00 kW︱Spindle head DIN55026 - Size 6 ︱spindle diameter in front bearing 110 mm︱travel -x axis 300 mm︱feed X-axis 1 - 30.000 mm/min︱rapid traverse X-axis 30,00 m/min︱feed force X axis 9.000 N︱travel -z axis 700 mm︱feed Z-Axis 1 - 40.000 mm/min︱rapid traverse Z-axis 40,00 m/min︱feed force Z axis 10.000 N︱no. of tools in turret 1 12 ︱no. of tools in turret 2 12 ︱tool taper VDI 40 DIN 69880︱total power requirement 70 kW︱
            turning diameter max. 140 mm
            swing diameter Futter / Chuck Ø 250 mm
            turning height 630 mm
            Control SIN840 PL
            spindle turning speed - stepless 1 - 5.000 U/min
            power capacity at 40 % load 38,00 kW
            Spindle head DIN55026 - Size 6
            spindle diameter in front bearin. 110 mm
            travel -x axis 300 mm
            feed X-axis 1 - 30.000 mm/min
            rapid traverse X-axis 30,00 m/min
            feed force X axis 9.000 N
            travel -z axis 700 mm
            feed Z-Axis 1 - 40.000 mm/min
            rapid traverse Z-axis 40,00 m/min
            feed force Z axis 10.000 N
            no. of tools in turret 1 12
            no. of tools in turret 2 12
            tool taper VDI 40 DIN 69880
            total power requirement 70 kW
            Description :



        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine DMG GILDEMEISTER CTV 160


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023155 · Vertical Turning Machine

          DMG GILDEMEISTER - CTV 160 - - 2008 - Siemens Sinumerik 840 D

          Technical details
          turning diameter 160 mm︱turning height 160 mm︱control Siemens Sinumerik 840 D ︱travel: ︱x-axis 575 mm︱y-axis +/- 90 mm︱z-axis 300 mm︱main spindle: ︱max. turning speeds 6000 min/-1︱drive capacity - main spindle 21 / 16 kW︱max. torque 176 Nm︱spindle head 140h5 ︱spindle diameter in front bearing 100 mm︱chucking diameter 160 (200) mm︱C-Axis 0,001 °︱total power requirement 40 kW︱weight of the machine ca. 5,3 t︱dimensions of the machine ca. 6,5 x 4,5 x 3 m︱
          In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. technical features - ShopTurn ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            turning diameter 160 mm
            turning height 160 mm
            control Siemens Sinumerik 840 D
            x-axis 575 mm
            y-axis +/- 90 mm
            z-axis 300 mm
            max. turning speeds 6000 min/-1
            drive capacity - main spindle 21 / 16 kW
            max. torque 176 Nm
            spindle head 140h5
            spindle diameter in front bearin. 100 mm
            chucking diameter 160 (200) mm
            C-Axis 0,001 °
            total power requirement 40 kW
            weight of the machine ca. 5,3 t
            dimensions of the machine ca. 6,5 x 4,5 x 3 m
            Description :
            In our opinion, the machine is in good used condition
            Condition and can be viewed under power by appointment.

            technical features
            - ShopTurn

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine EMAG VTC 250 DUO DD


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1411 · Vertical Turning Machine

          EMAG - VTC 250 DUO DD - - 2007 - Siemens 840-D

          Technical details
          control Siemens 840-D ︱tool taper HSK & VDI 40 ︱- - - - - - - - -︱
          Vertical Turning Machine EMAG - VTC 250 DUO DD with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets - 12-position disc turret for driven tools and VDI 40 tool holders, - 12-station disc turret with cross-slot and VDI 40 tool holders, - 12-station disc turret for driven tools and VDI 40 tool holders, - NC steady rest, self-centering, - headstock below, - tailstock below, - chip conveyor - Knoll unit 1.500 l, - OP10: Three-jaw chuck Rhöm KFD-N 220/3, - OP20: Hainbuch Spanntop pull-back BZI65, - Live tool for axial and radial machining, - Tool holder with Capto 5 quick change system, - Artis as tool and process monitoring, The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO
            control Siemens 840-D
            tool taper HSK & VDI 40
            - - - - - - - - -
            Description :
            Vertical Turning Machine EMAG - VTC 250 DUO DD with
            ITC (7-30 bar) and driven tools

            Additional equipment:

            - Workpiece grippers on all 3 turrets
            - 12-position disc turret for driven tools and VDI 40 tool holders,
            - 12-station disc turret with cross-slot and VDI 40 tool holders,
            - 12-station disc turret for driven tools and VDI 40 tool holders,
            - NC steady rest, self-centering,
            - headstock below,
            - tailstock below,

            - chip conveyor
            - Knoll unit 1.500 l,

            - OP10: Three-jaw chuck Rhöm KFD-N 220/3,
            - OP20: Hainbuch Spanntop pull-back BZI65,
            - Live tool for axial and radial machining,
            - Tool holder with Capto 5 quick change system,
            - Artis as tool and process monitoring,


            The machine is in a well-maintained condition.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine HESSAPP DVH 450e


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1745 · Vertical Turning Machine

          HESSAPP - DVH 450e - - 2005 - FANUC 21i-TB

          Technical details
          turning diameter 450 mm︱swing diameter 510 mm︱turning height 450 mm︱Control FANUC 21i-TB ︱total power requirement 40 kW︱weight of the machine ca. 13,5 t︱dimensions of the machine ca. LTH 6,2 x 2,7 x 3,2 m︱
          incl. magazine incl. chip conveyor incl. driven tools
            turning diameter 450 mm
            swing diameter 510 mm
            turning height 450 mm
            Control FANUC 21i-TB
            total power requirement 40 kW
            weight of the machine ca. 13,5 t
            dimensions of the machine ca. LTH 6,2 x 2,7 x 3,2 m
            Description :
            incl. magazine
            incl. chip conveyor
            incl. driven tools


        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine EMAG VTC 250 DUO ED


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1410 · Vertical Turning Machine

          EMAG - VTC 250 DUO ED - - 2005 - Siemens 840-D

          Technical details
          control Siemens 840-D ︱tool taper HSK & VDI 40 ︱- - - - - - - - -︱
          Vertical Turning Machine | EMAG - VTC 250 DUO ED with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets, - 6-station end-processing turret with HSK tool holder, - 12-station disc turret for driven tools and VDI 40 tool holder, - 12-position disc revolver with cross slot and VDI 40 tool holder, - NC - clamping head, - NC bezel, self-centering, - EMAG hydraulic double-piston clamping cylinder, - tailstock down, - Hydraulic double-piston clamping cylinder at the top, - chip conveyor, - Knoll plant 1.500 l, - Coolant supply 7-30 bar, - OP20: shaft chuck with retractable jaws and face drivers, - Tool holder with Capto 5, - Artis quick-change system for tool and process monitoring, - Tool pack is included, The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO
            control Siemens 840-D
            tool taper HSK & VDI 40
            - - - - - - - - -
            Description :
            Vertical Turning Machine | EMAG - VTC 250 DUO ED
            with ITC (7-30 bar) and driven tools


            Additional equipment:

            - Workpiece grippers on all 3 turrets,
            - 6-station end-processing turret with HSK tool holder,
            - 12-station disc turret for driven tools and VDI 40 tool holder,
            - 12-position disc revolver with cross slot and VDI 40 tool holder,
            - NC - clamping head,
            - NC bezel, self-centering,
            - EMAG hydraulic double-piston clamping cylinder,
            - tailstock down,
            - Hydraulic double-piston clamping cylinder at the top,
            - chip conveyor,

            - Knoll plant 1.500 l,
            - Coolant supply 7-30 bar,

            - OP20: shaft chuck with retractable jaws and face drivers,
            - Tool holder with Capto 5,
            - Artis quick-change system for tool and process monitoring,
            - Tool pack is included,


            The machine is in a well-maintained condition.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine HESSAPP DVH 250


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-16138 · Vertical Turning Machine

          HESSAPP - DVH 250 - - 2002 - Siemens Sinumerik 840 D

          Technical details
          turning diameter 200 mm︱swing diameter 250 mm︱turning height 350 mm︱control Siemens Sinumerik 840 D ︱spindle diameter in front bearing 100 mm︱feed range 0,1 - 20000 mm/min︱rapid traverse 20 m/min︱stroke of vertical slide 300 mm︱spindle head DIN 55026 - Size A 650 - 6500 1/min︱Speed range drive tool 0 - 3000 1/min︱total power requirement 40 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. 4,5 x 4,0 x 3,5 m︱
          equipped with: - CNC Control Siemens 840 D - Tool turret for 12 tools VDI 40 - driven tools on station 1/4/7/10 - conveyor belt - no coolant system (machines was added to a centrelized coolant system)
            turning diameter 200 mm
            swing diameter 250 mm
            turning height 350 mm
            control Siemens Sinumerik 840 D
            spindle diameter in front bearin. 100 mm
            feed range 0,1 - 20000 mm/min
            rapid traverse 20 m/min
            stroke of vertical slide 300 mm
            spindle head DIN 55026 - Size A 6
            50 - 6500 1/min
            Speed range drive tool 0 - 3000 1/min
            total power requirement 40 kW
            weight of the machine ca. 8 t
            dimensions of the machine ca. 4,5 x 4,0 x 3,5 m
            Description :
            equipped with:
            - CNC Control Siemens 840 D
            - Tool turret for 12 tools VDI 40
            - driven tools on station 1/4/7/10
            - conveyor belt
            - no coolant system (machines was added to a centrelized coolant system)


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine EMAG VL5


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20974 · Vertical Turning Machine

          EMAG - VL5 - - 2001 - FANUC 18 i-T

          Technical details
          chucking diameter 250 mm︱swing diameter 260 mm︱travel -x axis 570 mm︱travel -z axis 200 mm︱control FANUC 18 i-T ︱Turning speeds mainspindle 4500 U/min︱numbers of positions in the tool changer 12 ︱Dimensions (L x W x H) 3.700 x 1.500 x 2.400 mm︱weight of the machine 6.500 kg︱main drive motor 15 kW︱turret 12 station VDI 40
          machine is equipped with a closed standard autom. loader: for 12 workpieces 80 mm-220 mm for 14 workpieces 30 mm-160 mm for 28 workpieces 30 mm-85 mm max. total load 120 kg
            chucking diameter 250 mm
            swing diameter 260 mm
            travel -x axis 570 mm
            travel -z axis 200 mm
            control FANUC 18 i-T
            Turning speeds mainspindle 4500 U/min
            numbers of positions in the tool. 12
            Dimensions (L x W x H) 3.700 x 1.500 x 2.400 mm
            weight of the machine 6.500 kg
            main drive motor 15 kW
            turret 12 station VDI 40
            Description :
            machine is equipped with a closed standard autom. loader:
            for 12 workpieces 80 mm-220 mm
            for 14 workpieces 30 mm-160 mm
            for 28 workpieces 30 mm-85 mm
            max. total load 120 kg


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine INDEX V100


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1647 · Vertical Turning Machine

          INDEX - V100 - - 2001 -

          Technical details
          max. turning speeds 10.000 U/min.︱chucking diameter 130 mm︱spindle diameter in front bearing 70 mm︱numbers of positions in the tool changer 12 ︱toolpiece turning speed range 6.000 U/min︱
          Vertical Turning Machine | INDEX - V100 Equipment: - coolant device, - integr. Chip conveyor: Knoll - 320S-1/160 (year 2001) - all-round workpiece carrier system: Schnaithmann (built in 2000) - all-round buffer belt, - Control cabinet, with cooling unit: Rittal The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-100 | V 100
            max. turning speeds 10.000 U/min.
            chucking diameter 130 mm
            spindle diameter in front bearin. 70 mm
            numbers of positions in the tool. 12
            toolpiece turning speed range 6.000 U/min
            Description :
            Vertical Turning Machine | INDEX - V100


            Equipment:
            - coolant device,
            - integr. Chip conveyor: Knoll - 320S-1/160 (year 2001)
            - all-round workpiece carrier system: Schnaithmann (built in 2000)
            - all-round buffer belt,
            - Control cabinet, with cooling unit: Rittal


            The machine is in very good condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: V-100 | V 100


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine INDEX V100


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1648 · Vertical Turning Machine

          INDEX - V100 - - 2001 -

          Technical details
          max. turning speeds 10.000 U/min.︱chucking diameter 130 mm︱spindle diameter in front bearing 70 mm︱numbers of positions in the tool changer 12 ︱toolpiece turning speed range 6.000 U/min︱
          Vertical Turning Machine | INDEX - V100 Equipment: - coolant device, - rotating workpiece transport system, - Chip filter: Knoll-320S-1 (built in 2001), - all-round buffer belt, - Control cabinet, with cooling unit: Rittal The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-100 | V 100
            max. turning speeds 10.000 U/min.
            chucking diameter 130 mm
            spindle diameter in front bearin. 70 mm
            numbers of positions in the tool. 12
            toolpiece turning speed range 6.000 U/min
            Description :
            Vertical Turning Machine | INDEX - V100


            Equipment:
            - coolant device,
            - rotating workpiece transport system,
            - Chip filter: Knoll-320S-1 (built in 2001),
            - all-round buffer belt,
            - Control cabinet, with cooling unit: Rittal


            The machine is in very good condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: V-100 | V 100


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine EMAG VSC 200


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1555 · Vertical Turning Machine

          EMAG - VSC 200 - - 1999 - Siemens

          Technical details
          turning diameter 260 mm︱turning length 200 mm︱control Siemens ︱spindle bore diameter 50 mm︱Dimensions (L x W x H) 3.160 x 1.200 x 2.650 mm︱machine weight ab. 6.000 kg︱
          Vertical lathe | EMAG - VSC 200 The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VSC200 | VSC-200
            turning diameter 260 mm
            turning length 200 mm
            control Siemens
            spindle bore diameter 50 mm
            Dimensions (L x W x H) 3.160 x 1.200 x 2.650 mm
            machine weight ab. 6.000 kg
            Description :
            Vertical lathe | EMAG - VSC 200


            The machine is in a well-maintained condition.

            Please note that the technical details
            were added from comparable machines.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VSC200 | VSC-200


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine EMAG VSC 200 DUO


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1571 · Vertical Turning Machine

          EMAG - VSC 200 DUO - - 1999 - Siemens

          Technical details
          control Siemens ︱- - - - - - - - -︱- - - - - - - - -︱
          Vertical lathe | EMAG - VSC 200 DUO The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VSC200DUO | VSC200 DUO | VSC 200DUO | VSC-200 DUO
            control Siemens
            - - - - - - - - -
            - - - - - - - - -
            Description :
            Vertical lathe | EMAG - VSC 200 DUO


            The machine is in a well-maintained condition.

            Technical data of the machine will follow soon.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VSC200DUO | VSC200 DUO | VSC 200DUO | VSC-200 DUO


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine INDEX  V 200


          • desba TRADING
          • Im Hofgarten 6
          • 61130 Nidderau
          • Deutschland

          • +49 (0)6187 20 30 749
          • info@desba-trading.de
            www.desba-trading.de
          #2072-2049 · Vertical Turning Machine

          INDEX - V 200 - - 1998 - Siemens

          Technical details
          turning diameter 520 mm︱swing diameter 420 mm︱turning height 200 mm︱Control Siemens ︱total power requirement kW︱weight of the machine ca. 3,8 t︱dimensions of the machine ca. m︱
            turning diameter 520 mm
            swing diameter 420 mm
            turning height 200 mm
            Control Siemens
            weight of the machine ca. 3,8 t


        • desba TRADING
        • Im Hofgarten 6
        • 61130 Nidderau
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turning Machine HESSAPP DVH 250


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-16137 · Vertical Turning Machine

          HESSAPP - DVH 250 - - 1995 - Siemens Sinumerik 840 C

          Technical details
          turning diameter 200 mm︱swing diameter 250 mm︱turning height 350 mm︱control Siemens Sinumerik 840 C ︱spindle diameter in front bearing 100 mm︱feed range 0,1 - 20000 mm/min︱rapid traverse 20 m/min︱stroke of vertical slide 300 mm︱spindle head DIN 55026 - Size A 650 - 6500 1/min︱Speed range drive tool 0 - 3000 1/min︱total power requirement 40 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. 4,5 x 4,0 x 3,5 m︱
          equipped with: - CNC Control Siemens 840 D - Tool turret for 12 tools VDI 40 - driven tools on station 1/4/7/10 - conveyor belt - no coolant system (machines was added to a centrelized coolant system)
            turning diameter 200 mm
            swing diameter 250 mm
            turning height 350 mm
            control Siemens Sinumerik 840 C
            spindle diameter in front bearin. 100 mm
            feed range 0,1 - 20000 mm/min
            rapid traverse 20 m/min
            stroke of vertical slide 300 mm
            spindle head DIN 55026 - Size A 6
            50 - 6500 1/min
            Speed range drive tool 0 - 3000 1/min
            total power requirement 40 kW
            weight of the machine ca. 8 t
            dimensions of the machine ca. 4,5 x 4,0 x 3,5 m
            Description :
            equipped with:
            - CNC Control Siemens 840 D
            - Tool turret for 12 tools VDI 40
            - driven tools on station 1/4/7/10
            - conveyor belt
            - no coolant system (machines was added to a centrelized coolant system)


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •