,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Bench Lathe

          Machinelist: Bench Lathe


          Bench Lathe

          used Lathes Bench Lathe KAMI DKM 250V.550


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78007 · Bench Lathe

          KAMI - DKM 250V.550 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 20 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 60 mm︱metric threading 0,4 - 3,0 mm︱thread - inch 10 - 44 TPI︱thread - module 0,2 - 12,5 mm︱connected load frequency 230 V︱total power requirement 1,0 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,09 x 0,59 x 0,45 m︱
          Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 20 mm
            tailstock quill taper MT 2
            tailstock quill stroke 60 mm
            metric threading 0,4 - 3,0 mm
            thread - inch 10 - 44 TPI
            thread - module 0,2 - 12,5 mm
            connected load frequency 230 V
            total power requirement 1,0 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 1,09 x 0,59 x 0,45 m
            Description :
            Equipped with
            - 20 mm spindle passage
            - adjustable guideways
            - Powerful 1.0 kW motor
            - continuously variable speed
            Scope of delivery:
            - 3-jaw chuck 100 mm,
            - 4-jaw faceplate chuck 125mm
            - standing and rotating bezel
            - Splash guard
            - Feed protection


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 250 x 550 Norton Profi


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78003 · Bench Lathe

          HBM - 250 x 550 Norton Profi - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 125 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,135 t︱dimensions of the machine ca. 1,25 x 0,6 x 0,6 m︱
          Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 125 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,135 t
            dimensions of the machine ca. 1,25 x 0,6 x 0,6 m
            Description :
            Speed in 6 levels 125 - 2000rpm.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm. (Independent)
            Fixed bezel.
            Revolving bezel.
            4-fold steel holder.
            chip tray.
            back panel.
            spindle protection.
            Hardened bed rails.
            Longitudinal feed with left / right switching.
            Set of change gears.
            Associated Tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe ELMAG Superturn Vario mit MFB Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78005 · Bench Lathe

          ELMAG - Superturn Vario mit MFB Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 145 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱connected load frequency 230 V︱bore capacity in steel 16 mm︱throat 169 mm︱quill stroke 50 mm︱turning speed range - drilling 50 - 2250 U/min︱spindle drive 0,5 kW︱total power requirement 0,75 kW︱weight of the machine ca. 0,175 t︱dimensions of the machine ca. 1,3 x 0,65 x 1,3 m︱
          3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.
            turning diameter over bed 250 mm
            turning diameter over slide rest 145 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            connected load frequency 230 V
            bore capacity in steel 16 mm
            throat 169 mm
            quill stroke 50 mm
            turning speed range - drilling 50 - 2250 U/min
            spindle drive 0,5 kW
            total power requirement 0,75 kW
            weight of the machine ca. 0,175 t
            dimensions of the machine ca. 1,3 x 0,65 x 1,3 m
            Description :
            3-axis LCD digital display system
            longitudinal feed.
            3-jaw chuck 125 mm.
            4-way steel holder.
            chip tray, bulkhead
            Hardened bed tracks.
            Emergency stop switch.
            lining protection
            Tool box, instruction manual.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe KAMI DKM 250L


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78001 · Bench Lathe

          KAMI - DKM 250L - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 27 mm spindle clearance - adjustable guideways - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Danger!! without digital display Scope of delivery: 3-jaw chuck 100 mm, change gear set, splash guard. On request also with 230 volt connection
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 27 mm spindle clearance
            - adjustable guideways
            - Powerful motor with 0.75 kW
            - High resolution of the axis spindles for exact positioning
            - Danger!! without digital display
            Scope of delivery:
            3-jaw chuck 100 mm, change gear set, splash guard.

            On request also with 230 volt connection


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 250 x 550 Profi Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78002 · Bench Lathe

          HBM - 250 x 550 Profi Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 1,1 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,3 x 0,6 x 0,65 m︱
          Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 1,1 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,3 x 0,6 x 0,65 m
            Description :
            Benchtop lathe with base cabinet
            3-axis LCD digital display system fully assembled.
            Longitudinal feed.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm.
            Clamping plate.
            4-way steel holder.
            Clock for thread cutting.
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Forage protection
            Set of wheels.
            Appropriate tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe KAMI DKM 250L-1


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78000 · Bench Lathe

          KAMI - DKM 250L-1 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 2-axis digital measuring system with position indicator
            - manufactured according to DIN 8606
            - 27 mm spindle passage
            - adjustable guideways "by adjustable strips"
            - Strong engine with 0.75 kW
            - High resolution of the axis spindles for exact positioning

            Delivery:
            3-jaw chuck 100 mm, change gear set, splash guard 3-axis
            digital measuring system fully assembled.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe ELMAG Superturn 250 x 550 Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78004 · Bench Lathe

          ELMAG - Superturn 250 x 550 Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 145 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,3 x 0,65 x 0,6 m︱
          longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.
            turning diameter over bed 250 mm
            turning diameter over slide rest 145 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 1,3 x 0,65 x 0,6 m
            Description :
            longitudinal feed.
            3-jaw chuck 125 mm.
            4-way steel holder.
            chip tray, bulkhead
            Hardened bed tracks.
            Emergency stop switch.
            lining protection
            Tool box, instruction manual.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 290 x 750


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78006 · Bench Lathe

          HBM - 290 x 750 - - -neu- -

          Technical details
          turning diameter over bed 290 mm︱turning diameter over slide rest 170 mm︱turning length 750 mm︱turning speeds 75 - 2000 U/min︱centre height 145 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 MK︱tailstock quill stroke 80 mm︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,34 t︱dimensions of the machine ca. 1,3 x 0,75 x 0,7 m︱
          2-axis LCD digital display system (now new). Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools.
            turning diameter over bed 290 mm
            turning diameter over slide rest 170 mm
            turning length 750 mm
            turning speeds 75 - 2000 U/min
            centre height 145 mm
            spindle bore 38 mm
            tailstock quill taper MT 3 MK
            tailstock quill stroke 80 mm
            connected load frequency 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,34 t
            dimensions of the machine ca. 1,3 x 0,75 x 0,7 m
            Description :
            2-axis LCD digital display system (now new).
            Longitudinal and transverse feed.
            3-jaw chuck 160 mm.
            4-jaw chuck 160 mm.
            faceplate
            4-way steel holder with 4 pcs tool holders
            2 pcs. bezels
            Machine light
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Feed protection
            Set of wheels.
            Machine tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe SCHAUBLIN 102 N


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4180 · Bench Lathe

          SCHAUBLIN - 102 N - - -

          Technical details
          centre height 102 mm︱Distance between centres 450 mm︱turning dia. over face-slide 120 mm︱turning diameter over bed 200 mm︱spindle taper: W20 ︱spindle bore 22 mm︱number of spindle speeds 18 ︱from/to 45-2500 U/min︱tailstock quill taper MT 2 ︱diameter of quill 30 mm︱quill stroke 110 mm︱dimensions of the machine ca. 1500x800x1400 mmxmmxmm︱weight 380 kg︱accessories and equipment: ︱3-jaw-chuck diameter 100 mm︱quick change tool holder: ︱make MULTIFIX ︱boring chuck 1 ︱misc. accessories
            centre height 102 mm
            Distance between centres 450 mm
            turning dia. over face-slide 120 mm
            turning diameter over bed 200 mm
            spindle taper: W20
            spindle bore 22 mm
            number of spindle speeds 18
            from/to 45-2500 U/min
            tailstock quill taper MT 2
            diameter of quill 30 mm
            quill stroke 110 mm
            dimensions of the machine ca. 1500x800x1400 mmxmmxmm
            weight 380 kg
            3-jaw-chuck diameter 100 mm
            make MULTIFIX
            boring chuck 1


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used Lathes Lathe -  cycle-controlled UNITECH UT 560


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3666 · Lathe - cycle-controlled

          UNITECH - UT 560 - - 2014 - Siemens Sinumerik 828 D

          Technical details
          greates pass round over bed 560 mm︱turning length 1500 mm︱control Siemens Sinumerik 828 D ︱swing diameter over slide rest 390 mm︱spindle speed: 2400 Upm︱bed width 345 mm︱spindle bore 80 mm︱diameter of quill 75 mm︱quill stroke 200 mm︱tailstock quill taper MT 5 ︱3-jaw chuck Schunk Rota S 315 ︱3-jaw-chuck diameter 315 mm︱main drive 14 kW︱weight of the machine ca. 2900 kg︱dimensions of the machine ca. m︱
          removeable bed bridge user interface control: Shopturn hydraulical tailstock quill adjustment key bar chuck Schunk Rota S+ 2.0 315-92 quick change tool holder Choromant Capto
            greates pass round over bed 560 mm
            turning length 1500 mm
            control Siemens Sinumerik 828 D
            swing diameter over slide rest 390 mm
            spindle speed: 2400 Upm
            bed width 345 mm
            spindle bore 80 mm
            diameter of quill 75 mm
            quill stroke 200 mm
            tailstock quill taper MT 5
            3-jaw chuck Schunk Rota S 315
            3-jaw-chuck diameter 315 mm
            main drive 14 kW
            weight of the machine ca. 2900 kg
            Description :
            removeable bed bridge

            user interface control: Shopturn

            hydraulical tailstock quill adjustment

            key bar chuck Schunk Rota S+ 2.0 315-92

            quick change tool holder Choromant Capto






        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled PINACHO Smart turn 8 225


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03977 · Lathe - cycle-controlled

          PINACHO - Smart turn 8 225 - - 2013 - FAGOR TC 8055

          Technical details
          turning diameter 450 mm︱turning length 1500 mm︱control FAGOR TC 8055︱total power requirement 15 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2.29X1 X 1.2 m︱
          TEACH IN CNC LATHE Pinacho offers the CNC flat bed lathe ST-225. This is a fast and accurate machine up to 450 mm in swing over bed, 1500 mm in distance between centers and 65 mm in spindle bore. 2 or 3 axis parallel lathes combined with Fagor controL. The available power up to 15 kW in addition to the high rotary speed and low vibrations provided by the servomotor and headstock design make the ST-225 an authentic leader in its category.
            turning diameter 450 mm
            turning length 1500 mm
            control FAGOR TC 8055
            total power requirement 15 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2.29X1 X 1.2 m
            Description :
            TEACH IN CNC LATHE
            Pinacho offers the CNC flat bed lathe ST-225. This is a fast and accurate
            machine up to 450 mm in swing over bed, 1500 mm in distance between centers and
            65 mm in spindle bore. 2 or 3 axis parallel lathes combined with Fagor controL.
            The available power up to 15 kW in addition to the high rotary speed and low
            vibrations provided by the servomotor and headstock design make the ST-225 an
            authentic leader in its category.


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled CAZENEUVE OPTIMAX 360


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4829 · Lathe - cycle-controlled

          CAZENEUVE - OPTIMAX 360 - - 2013 - SIEMENS

          Technical details
          turning diameter 380 mm︱turning length 700 mm︱control SIEMENS ︱spindle turning speed - stepless 2500 U/min︱tailstock quill taper MT 4 ︱weight 1.5 t︱dimensions of the machine ca. 2000x1400x1820 mmxmmxmm︱
            turning diameter 380 mm
            turning length 700 mm
            control SIEMENS
            spindle turning speed - stepless 2500 U/min
            tailstock quill taper MT 4
            weight 1.5 t
            dimensions of the machine ca. 2000x1400x1820 mmxmmxmm


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WAGNER WDE 500


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20401 · Lathe - cycle-controlled

          WAGNER - WDE 500 - - 2010 - Sinumerik

          Technical details
          centre height 250 mm︱centre distance 1500 mm︱turning diameter over bed 500 mm︱turning diameter over slide 280 mm︱turning length 1500 mm︱spindle taper D8 ︱control Sinumerik ︱bed width 390 mm︱spindle bore 82 mm︱turning speed range 45-2000 U/min︱rapid travel - longitudinal/face 8/4 m/min︱3-jaw-chuck diameter 250 mm︱quick change toolholder System Multifix ︱drive capacity - spindle motor 6,5 kW︱taper in tailstock-quill MK 5 ︱dia. of quill 75 mm︱quill stroke 150 mm︱coolant 3,0 ︱voltage 400 V︱total power requirement 24 kVA︱
          - Serial-No. G01262 - Control: Sinumerik 802 C
            centre height 250 mm
            centre distance 1500 mm
            turning diameter over bed 500 mm
            turning diameter over slide 280 mm
            turning length 1500 mm
            spindle taper D8
            control Sinumerik
            bed width 390 mm
            spindle bore 82 mm
            turning speed range 45-2000 U/min
            rapid travel - longitudinal/face 8/4 m/min
            3-jaw-chuck diameter 250 mm
            quick change toolholder System Multifix
            drive capacity - spindle motor 6,5 kW
            taper in tailstock-quill MK 5
            dia. of quill 75 mm
            quill stroke 150 mm
            coolant 3,0
            voltage 400 V
            total power requirement 24 kVA
            Description :
            - Serial-No. G01262
            - Control: Sinumerik 802 C


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SEIGER SLZ 620E


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-032992 · Lathe - cycle-controlled

          SEIGER - SLZ 620E - - 2010 - Sinumerik 840D SL

          Technical details
          turning diameter 660 mm︱centre distance 3000 mm︱control Sinumerik 840D SL ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱turning length mm︱
          Sinumerik 840D SL control 3-jaw chuck diameter 315mm 4-fold Parat tool holder device steady rest 12mm – 150mm steady rest 120mm – 270mm tail stock chip conveyor coolant device Technische Daten / technical details: Spitzenweite / center to center 3000 mm Umlufdurchmesser über Bett / rotary diameter over bed 660 mm Umlaufdurchmesser über Schlitten / rotary diameter over sledge 435 mm Spindelbohrung / spindle hole 93 mm Drehzahlbereich (2-stufig) / spindle speed (2-steps) 1-2500 UpM /rpm Eilgang X, Z / rapid feed X, Z 8/10 m/min Reitstockaufnahme / tail stock taper MK6 Antriebsleistung Spindel 100/60%ED / drive capacity spindle 100/60%ED 22/30 kW Gewicht der Maschine ca. / weight ca. 6300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            turning diameter 660 mm
            centre distance 3000 mm
            control Sinumerik 840D SL
            Description :
            Sinumerik 840D SL control
            3-jaw chuck diameter 315mm
            4-fold Parat tool holder device
            steady rest 12mm – 150mm
            steady rest 120mm – 270mm
            tail stock
            chip conveyor
            coolant device

            Technische Daten / technical details:
            Spitzenweite / center to center 3000 mm
            Umlufdurchmesser über Bett / rotary diameter over bed 660 mm
            Umlaufdurchmesser über Schlitten / rotary diameter over sledge 435 mm
            Spindelbohrung / spindle hole 93 mm
            Drehzahlbereich (2-stufig) / spindle speed (2-steps) 1-2500 UpM /rpm
            Eilgang X, Z / rapid feed X, Z 8/10 m/min
            Reitstockaufnahme / tail stock taper MK6
            Antriebsleistung Spindel 100/60%ED / drive capacity spindle 100/60%ED 22/30
            kW
            Gewicht der Maschine ca. / weight ca. 6300 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.





        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SEIGER SLZ 1200 x 6000


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23228 · Lathe - cycle-controlled

          SEIGER - SLZ 1200 x 6000 - - 2009 - Heidenhain

          Technical details
          turning diameter 1250 mm︱turning length 6000 mm︱control Heidenhain ︱spindle bore 130 mm︱0 5-710 U/min︱transmission ratio 2 ︱workpiece weight 7000 kg︱total power requirement 37/52 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. 12x4x2 m︱
          2 Technical data 2.1 Mechanics Working range centre distance: 6000 mm Circulation diameter over bed track: 1250 mm Circulation diameter over facing slide: 850 mm Displacement of the facing slide: 680 mm Bed width: 750 mm Turning tool cross-section (height x width) 40x40 mm Turning spindle Spindle head according to DIN 55027 - size 11 Spindle diameter in front bearing: 190 mm Spindle bore: 130 mm Main drive AC drive power 100% / 60% ED - KW 37 / 52 Max. torque at the spindle approx. 9000 Nm Speed range: 5 - 710 min(-1) Feed drive AC X-feed force 100% ED - 30000 N Z feed force 100% ED - 20000 N X rapid traverse m/min 6 Y rapid traverse m/min 3 Tailstock Quill diameter: 160 mm Quill stroke: 315 mm Quill holder (inner taper) MK 6 Fixed steady rest Clearance (max.) (option): 450 mm Impulse lubrication Flow rate: |/min 0.1 Pump pressure: 30 bar Tank capacity: 2 dm³ Recirculating lubrication Flow rate: |/min 5 Pump pressure: 0.4 bar Tank capacity: 40 dm³
            turning diameter 1250 mm
            turning length 6000 mm
            control Heidenhain
            spindle bore 130 mm
            0 5-710 U/min
            transmission ratio 2
            workpiece weight 7000 kg
            total power requirement 37/52 kW
            weight of the machine ca. 16 t
            dimensions of the machine ca. 12x4x2 m
            Description :
            2 Technical data
            2.1 Mechanics

            Working range centre distance: 6000 mm
            Circulation diameter over bed track: 1250 mm
            Circulation diameter over facing slide: 850 mm
            Displacement of the facing slide: 680 mm
            Bed width: 750 mm

            Turning tool cross-section (height x width) 40x40 mm

            Turning spindle Spindle head according to DIN 55027 - size 11
            Spindle diameter in front bearing: 190 mm
            Spindle bore: 130 mm

            Main drive AC drive power 100% / 60% ED - KW 37 / 52
            Max. torque at the spindle approx. 9000 Nm
            Speed range: 5 - 710 min(-1)

            Feed drive AC

            X-feed force 100% ED - 30000 N
            Z feed force 100% ED - 20000 N
            X rapid traverse m/min 6
            Y rapid traverse m/min 3

            Tailstock

            Quill diameter: 160 mm
            Quill stroke: 315 mm
            Quill holder (inner taper) MK 6

            Fixed steady rest Clearance (max.) (option): 450 mm

            Impulse lubrication
            Flow rate: |/min 0.1
            Pump pressure: 30 bar
            Tank capacity: 2 dm³

            Recirculating lubrication
            Flow rate: |/min 5
            Pump pressure: 0.4 bar
            Tank capacity: 40 dm³


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled VDF BOEHRINGER DUS 630 TI


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03777 · Lathe - cycle-controlled

          VDF BOEHRINGER - DUS 630 TI - - 2007 - HEINDENHAIN MANUEL PLUS 411

          Technical details
          swing diameter max. 640 mm︱turning length max. 3.000 mm︱control HEINDENHAIN MANUEL PLUS 411︱swing diameter over face slide 435 mm︱radial face slide travel 345 mm︱centre height 280 mm︱bed width 360 mm︱Main spindle: ︱turning speed range - main spindle 3 - 2.500 min/-1︱power capacity - main spindel 19 / 15 kW︱max. Torque 2500 Nm︱transmission ratio 2 ︱spindle nose DIN 55027 / 8 ︱spindle bearing diameter 100 mm︱max. bar capacity 95 mm︱usable bar diameter 80 mm︱chucking diameter 415 mm︱turret: ︱number of toolpositions PARRAT 4 FACH pos.4︱tool taper DIN 69880 / 32 X 25
          Lathe - cycle controled VDF BOEHRINGER - DUS 630 TI X 3000 YEAR 2007 CNC HEIDENHAIN MANUEL PLUS 411
            swing diameter max. 640 mm
            turning length max. 3.000 mm
            control HEINDENHAIN MANUEL PLUS 411
            swing diameter over face slide 435 mm
            radial face slide travel 345 mm
            centre height 280 mm
            bed width 360 mm
            turning speed range - main spind. 3 - 2.500 min/-1
            power capacity - main spindel 19 / 15 kW
            max. Torque 2500 Nm
            transmission ratio 2
            spindle nose DIN 55027 / 8
            spindle bearing diameter 100 mm
            max. bar capacity 95 mm
            usable bar diameter 80 mm
            chucking diameter 415 mm
            number of toolpositions PARRAT 4 FACH pos.4
            tool taper DIN 69880 / 32 X 25
            Description :
            Lathe - cycle controled
            VDF BOEHRINGER - DUS 630 TI X 3000 YEAR 2007
            CNC HEIDENHAIN MANUEL PLUS 411


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled KERN-DMT CD 402


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-J668 · Lathe - cycle-controlled

          KERN-DMT - CD 402 - - 2007 - SIEMENS 840D SL Shopturn

          Technical details
          control SIEMENS 840D SL Shopturn ︱turning dia. over bed 400 mm︱centre height 200 mm︱centre distance 1000 mm︱turning dia. over face-slide 230 mm︱spindle bore 64 mm︱bar capacity 52 mm︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 2800x1650x1750 mm︱
            control SIEMENS 840D SL Shopturn
            turning dia. over bed 400 mm
            centre height 200 mm
            centre distance 1000 mm
            turning dia. over face-slide 230 mm
            spindle bore 64 mm
            bar capacity 52 mm
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 2800x1650x1750 mm


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SEIGER SLZ800 / 1500


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20957 · Lathe - cycle-controlled

          SEIGER - SLZ800 / 1500 - - 2006 - SIEMENS SINUMERIK 810 Dpl

          Technical details
          turning diameter 800 mm︱turning length 1500 mm︱control SIEMENS SINUMERIK 810 Dpl ︱workpiece weight flying clamped 750 ︱workpiece weight with one steady 2200 kg︱swing diameter over face slide 540 mm︱power capacity 20/28 kW︱spindle bore 83 mm︱weight of the machine ca. 6 t︱dimensions of the machine ca. 3,5x2,8x2 m︱
          gearbox must be checked!! machine without tailstock! -without tools -without jaws
            turning diameter 800 mm
            turning length 1500 mm
            control SIEMENS SINUMERIK 810 Dpl
            workpiece weight flying clamped 750
            workpiece weight with one steady 2200 kg
            swing diameter over face slide 540 mm
            power capacity 20/28 kW
            spindle bore 83 mm
            weight of the machine ca. 6 t
            dimensions of the machine ca. 3,5x2,8x2 m
            Description :
            gearbox must be checked!!
            machine without tailstock!
            -without tools
            -without jaws


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WEILER E 70 x 2000


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2024038 · Lathe - cycle-controlled

          WEILER - E 70 x 2000 - - 2006 -

          Technical details
          greates pass round over bed 720 mm︱swing over plan sled 430 mm︱centre height 360 mm︱turning length 2.000 mm︱bed width 480 mm︱adjustment of the upper slide 140 mm︱main spindle: ︱turning speeds 1.800 U/min︱Drive power 60/100% ED 37,5 / 30 kW︱spindle bore 106 mm︱
          In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. The machine will be available from July 2024. Technical features: - Three-jaw chuck - Ready steel holder - DFX data import - Coolant device ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***
            greates pass round over bed 720 mm
            swing over plan sled 430 mm
            centre height 360 mm
            turning length 2.000 mm
            bed width 480 mm
            adjustment of the upper slide 140 mm
            turning speeds 1.800 U/min
            Drive power 60/100% ED 37,5 / 30 kW
            spindle bore 106 mm
            Description :
            In our opinion, the machine is in good used condition
            Condition and can be viewed under power by appointment.

            The machine will be available from July 2024.

            Technical features:
            - Three-jaw chuck
            - Ready steel holder
            - DFX data import
            - Coolant device

            ***Accessories, tools and clamping devices shown are only included in the scope
            of delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SOMAB OPTIMAB 450


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03940 · Lathe - cycle-controlled

          SOMAB - OPTIMAB 450 - - 2005 - SOMAB PL + S NUM 1060

          Technical details
          turning diameter 400 mm︱turning length 1100 mm︱control SOMAB PL + S NUM 1060︱turning dia. over face-slide 350 mm︱turning diameter over cross slideways 320 mm︱main drive motor 12 kW︱spindle turning speed range 4500 U/min︱spindle passage 73 mm︱chucking diameter 250 mm︱taper in tailstock MT 4 ︱total power requirement 23 kW︱weight of the machine ca. 5 t︱
          Machine in inclined bed execution with NUM-SOMAB PL+S3 cycle control with 12 POSTES TURRET
            turning diameter 400 mm
            turning length 1100 mm
            control SOMAB PL + S NUM 1060
            turning dia. over face-slide 350 mm
            turning diameter over cross slid. 320 mm
            main drive motor 12 kW
            spindle turning speed range 4500 U/min
            spindle passage 73 mm
            chucking diameter 250 mm
            taper in tailstock MT 4
            total power requirement 23 kW
            weight of the machine ca. 5 t
            Description :
            Machine in inclined bed execution
            with NUM-SOMAB PL+S3 cycle control
            with 12 POSTES TURRET


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled KERN CD 400 M


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4844 · Lathe - cycle-controlled

          KERN - CD 400 M - - 2004 -

          Technical details
          Control: Manufacture Fanuc ︱type Quick Turn mm︱turning dia. over bed 400 mm︱centre height 200 mm︱centre distance 1000 mm︱turning dia. over face-slide 230 mm︱turning dia. in gap 460 mm︱spindle bore 60 mm︱spindle taper: DIN 55027 / Gr.6 ︱spindle turning speed - stepless 1-3000 U/min︱tailstock quill taper MT 4 ︱diameter of quill 60 mm︱quill stroke 120 mm︱total power requirement 11 kW︱weight of the machine ca. 1.6 t︱dimensions of the machine ca. 275 x 140 x 155 cm x cm x cm︱Quick-change toolholder Multifix B ︱Number of toolholders 6 ︱3-jaw chuck: diameter 200 mm︱Collet chuck F48
            Control: Manufacture Fanuc
            type Quick Turn mm
            turning dia. over bed 400 mm
            centre height 200 mm
            centre distance 1000 mm
            turning dia. over face-slide 230 mm
            turning dia. in gap 460 mm
            spindle bore 60 mm
            spindle taper: DIN 55027 / Gr.6
            spindle turning speed - stepless 1-3000 U/min
            tailstock quill taper MT 4
            diameter of quill 60 mm
            quill stroke 120 mm
            total power requirement 11 kW
            weight of the machine ca. 1.6 t
            dimensions of the machine ca. 275 x 140 x 155 cm x cm x cm
            Quick-change toolholder Multifix B
            Number of toolholders 6
            3-jaw chuck: diameter 200 mm
            Collet chuck F48


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled POREBA TBA 63 x 2000


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17734 · Lathe - cycle-controlled

          POREBA - TBA 63 x 2000 - - 2004 - Fanuc PowerMate

          Technical details
          turning diameter 630 mm︱turning length 2000 mm︱control Fanuc PowerMate ︱turning diameter over slide 370 mm︱current capacity 30 kVA︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. 4,0 x 2,0 x 1,9 m︱
          Cycle Controlled Lathe with: CNC control Fanuc PowerMate/QuickTurn - 1 Steady 370mm - 1 steady 160mm - 1 Röhm chuck 400mm - Chip Tray with Coolant Pump - Tool Holder, Accessories
            turning diameter 630 mm
            turning length 2000 mm
            control Fanuc PowerMate
            turning diameter over slide 370 mm
            current capacity 30 kVA
            weight of the machine ca. 5,5 t
            dimensions of the machine ca. 4,0 x 2,0 x 1,9 m
            Description :
            Cycle Controlled Lathe with:
            CNC control Fanuc PowerMate/QuickTurn
            - 1 Steady 370mm
            - 1 steady 160mm
            - 1 Röhm chuck 400mm
            - Chip Tray with Coolant Pump
            - Tool Holder, Accessories


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WEILER E110


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-032976 · Lathe - cycle-controlled

          WEILER - E110 - - 2004 - Weiler D2

          Technical details
          centre distance 4500 mm︱swing diameter max. over bed cover 1100 mm︱swing diameter over face slide 730 mm︱control Weiler D2 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱turning diameter mm︱turning length mm︱
          Weiler D2 control 3-jaw chuck Röhm diameter 630mm Parat tool holder device Boring trestle steady rest 100-300mm steady rest 300-600mm tail stock chip conveyor coolant device Technische Daten / technical details: Spitzenweite / center to center 4500 mm Umlauf-Ø über Bett / turning Ø over bed 1100 mm Umlauf-Ø über Schlitten / turning Ø over sledge 730 mm Drehzahlbereich (2-stufig) / spindle speed (2-steps) 1-1120 UpM /rpm Spindelbohrung / spindle hole 128 mm Eilgang Z /X / rapid feed Z /X 7/3,5 m/min. Reitstockaufnahme / tail stock taper MK6 Antriebsleistung Spindel / drive capacity spindle 45/37 kW Gewicht der Maschine ca. / weight ca. 11500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            centre distance 4500 mm
            swing diameter max. over bed cov. 1100 mm
            swing diameter over face slide 730 mm
            control Weiler D2
            Description :
            Weiler D2 control
            3-jaw chuck Röhm diameter 630mm
            Parat tool holder device
            Boring trestle
            steady rest 100-300mm
            steady rest 300-600mm
            tail stock
            chip conveyor
            coolant device

            Technische Daten / technical details:
            Spitzenweite / center to center 4500 mm
            Umlauf-Ø über Bett / turning Ø over bed 1100 mm
            Umlauf-Ø über Schlitten / turning Ø over sledge 730 mm
            Drehzahlbereich (2-stufig) / spindle speed (2-steps) 1-1120 UpM /rpm
            Spindelbohrung / spindle hole 128 mm
            Eilgang Z /X / rapid feed Z /X 7/3,5 m/min.
            Reitstockaufnahme / tail stock taper MK6
            Antriebsleistung Spindel / drive capacity spindle 45/37 kW
            Gewicht der Maschine ca. / weight ca. 11500 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.





        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled GILDEMEISTER NEF 320 K


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02894 · Lathe - cycle-controlled

          GILDEMEISTER - NEF 320 K - - 2003 - Siemens

          Technical details
          turning diameter 320 mm︱turning length 750 mm︱control Siemens ︱type 810DL CCUO︱turning diameter over slide rest 150 mm︱cross movement 185 mm︱spindle passage 52 mm︱turning speeds 14-3550 U/min︱transmission ratio 2 ︱quill stroke 120 mm︱rapid traverse 6 m/min︱main drive motor 7 kW︱3-jaw-chuck diameter 200 mm︱total power requirement 10 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 2,6x1,44x1,44 m︱
          8950 turning hours
            turning diameter 320 mm
            turning length 750 mm
            control Siemens
            type 810DL CCUO
            turning diameter over slide rest 150 mm
            cross movement 185 mm
            spindle passage 52 mm
            turning speeds 14-3550 U/min
            transmission ratio 2
            quill stroke 120 mm
            rapid traverse 6 m/min
            main drive motor 7 kW
            3-jaw-chuck diameter 200 mm
            total power requirement 10 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 2,6x1,44x1,44 m
            Description :
            8950 turning hours


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

          TOP Manufacturer:

          HBM - KAMI - ELMAG - SCHAUBLIN -