Bar Automatic Lathe - Single Spindle

turning diameter 80 mm︱turning length . mm︱control Siemens C 200︱tool change unit 14 ︱live tooling ︱swing diameter 130 mm︱spindle passage 42 mm︱turret head 2 ︱total power requirement kW︱weight of the machine ca. t︱

---

spindle passage 25 mm︱turning speeds 5750 U/min︱Rest 4 ︱straight turning atchm. - working travel . mm︱turret head 8 ︱thread cutting attachment ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

spindle passage 34 mm︱turning length . mm︱bore depth . mm︱Control Index ︱type S 3 ︱live tooling ︱bar loader Sameca ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

spindle passage 60 mm︱cross-slide 4 ︱turret head 6 Pos.︱thread cutting attachment ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

spindle passage 60 mm︱cross-slide 4 ︱turret head 6 Pos.︱thread cutting attachment ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

spindle passage 25 mm︱turning speeds 5750 U/min︱Rest 4 ︱turret head 8 ︱thread cutting attachment ︱bar loader LNZ Hydrobar︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

spindle passage 25 mm︱turning speeds 5750 U/min︱Rest 4 ︱turret head 8 ︱thread cutting attachment ︱bar loader LNZ Hydrobar︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

spindle passage 25 mm︱turning speeds 5750 U/min︱Rest 4 ︱turret head 8 ︱thread cutting attachment ︱bar loader LNZ Hydrobar︱type 6.26HS-4.4 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

spindle passage 25 mm︱turning speeds 5750 U/min︱Rest 4 ︱straight turning atchm. - working travel . mm︱turret head 8 ︱thread cutting attachment ︱bar loader LNZ Hydrobar︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

spindle passage 25 mm︱turning speeds 5750 U/min︱Rest 4 ︱straight turning atchm. - working travel . mm︱turret head 8 ︱thread cutting attachment ︱bar loader LNZ Hydrobar︱type 6.32HS-4.4 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

spindle passage 25 mm︱turning speeds 5750 U/min︱Rest 4 ︱straight turning atchm. - working travel . mm︱turret head 8 ︱thread cutting attachment ︱bar loader LNZ Hydrobar︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

spindle passage 25 mm︱turning speeds 5750 U/min︱Rest 4 ︱turret head 8 ︱thread cutting attachment ︱bar loader LNZ Hydrobar︱type 6.30HS-4.4 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

turning diameter 1010 mm︱turning length 3000 mm︱control FANUC Oi TF mit Manual gu ︱max. swing over slide 718 mm︱bed width 500 mm︱spindle taper A2-11 ︱spindle speeds 0-1400 1/min.︱spindle bore 130 mm︱transmission ratio 2 Stk.︱tailstock quill diameter 120 mm︱tailstock quill stroke 300 mm︱taper of tailstock quill 6 MK︱max. length of work piece 3000 mm︱rapid traverse x/z 7,5/10 m/min︱power requirement 22 kW︱weight of the machine ca. 8050 kg︱dimensions of the machine ca. 5800x2290x2515 mm︱turret Duplomatic DM TR25 with B ︱hydr. tailstock quill movement ︱servo spindle motor ︱

---

New CNC lathe KRAFT ST 500/3000 with Fanuc Oi TD Made in Europe For more information please see the attached documents

turning diameter 520 mm︱turning length 500 mm︱control Fanuc 0i-TF ︱turning diameter over bed slide 320 mm︱max. swing diameter 520 mm︱spindle speeds 4500 1/min.︱spindle passage 64 mm︱spindle drive 15/11 kW︱C-axis 0,001 °︱tool turret 12-fach mit BMT-65 RADIAL _︱feed stepless 0,001-5000 mm/U︱travel -x axis 200 mm︱travel - z 600 mm︱rapid power traverse in X-and Z direction 30 m/min︱taper in tailstock 5 MK︱tailstock quill stroke 100 mm︱tailstock adjustment 500 mm︱weight of the machine ca. 4000 kg︱Overall size 3,6x2,1x2,4 m︱3-jaw hydraulic chuck 200mm mit Lufkühler ︱

---

brand new CNC slant bed lathe with 1. Control system Fanuc Oi-TD (8,4" LCD monitor) 2. X/Z-axis stroke 170/600 mm 3. X/Z-axis rapid traverse 30/30 M/MIN 4. Spindle motor 11 / 15 Kw 5. Spindle speed 4500 rpm (Belt driven type) 6. Spindle bearing dia. Ø 100 mm 7. Bar capacity Ø dia 51 mm) 8. Hydraulic Hollow chuck 8" x 3 jaws 9. Hyd. unit for chuck with air cooler 10. Servo driven turret system 12 stations 11. Manual tailstock stroke 500 mm + quill stroke 100 mm 12. Electrical cabinet with heat exchanger 13. Standard splash guide 14. Coolant unit 15. Transformer (power source 380V) 16. Chip conveyor H=1100 MM with trolley (chain type) 17. Machine color Tongtai white/Dark grey 18. Safety foot switch 19. Tricolor lamp 20. Fanuc warranty (western Europe) Standard accessories 1. Facing tool holders x 2 pcs 2. O.D. tool gaskets x 8 pcs 3. I.D. tool holder (dia 32 mm) x 4 pcs 4. Boring sleeve x 6 pcs (dia 8, 10, 12, 16, 20, 25 mm) 5. Drilling sleeve x 3 pcs (mt#1, 2, 3) 6. Soft jaws x 1 set 7. Rotating center x 1 pc (MT#4) installed Options: 1. CE mark 2. Tool presetter (manual) 3. Parts catcher 4. Workpiece conveyor 5. Bar feeder interface 6. Hard jaws x 1 set 7. Soft jaws x 5 sets 8. Manual guide I function + 10.4" screen warranty: 12 months on parts Machine is made by the biggest maker of machine tools in Taiwan, also builiding for wellknown japanese makers.

turning diameter 220 mm︱turning length 200 mm︱control Fanuc 0i TD mit Manual gu ︱spindle speeds 4800 1/min.︱spindle nose A2- 6︱bar material dia. 44 mm︱C-axis 0,001 °︱x-travel 155 mm︱z-travel 220 mm︱rapid power traverse in X-and Z direction 20 m/min︱spindle drive 11/15 KW ( FANUC ßiL12/10 )︱coolant 8 bar︱Weight approx. 2,4 t︱Machine size (LxWxH) 1560x1450x1760 mm︱3-jaw hydraulic chuck 200 mm︱turret 12-fach, VDI 40 ︱heat exchanger ︱hydraulic unit mit Lufkühler ︱chip conveyor with chip bucket ︱transformator ︱

---

+++SPECIAL PRICE+++SPECIAL OFFER+++ main features: -high speed -high spindle torque -big spindle bore -automatic forced lubrication -hardened and ground guideways -brand-new design eterior -CE certificate of TÜV Rheinland, Germany & ISO 9001 CQC, China All machines' functionalities will be checked and controlled before loading. The machines can be modified according to CE upon request. warranty: none

turning diameter 1010 mm︱turning length 3000 mm︱control Fanuc 0ITF ︱max. swing over slide 718 mm︱bed width 500 mm︱spindle taper A2-11 ︱spindle speeds 0-1400 1/min.︱spindle bore 130 mm︱transmission ratio 2 ︱tailstock quill diameter 120 mm︱tailstock quill stroke 300 mm︱taper of tailstock quill 6 MK︱max. length of work piece 5000 mm︱rapid traverse x/z 10/10 m/min︱power requirement 22 kW︱weight of the machine ca. 10.000 kg︱dimensions of the machine ca. 5325x1800x2230 mm︱hydr. tailstock quill movement ︱automatic tool changer 12-fach ︱c-axis ︱

---

New CNC lathe KRAFT ST 500/5000 with Fanuc Oi TD Made in Europe For more information please see the attached documents

turning diameter 460 mm︱turning length 750 mm︱control fanuc 32 i ︱swing dia. 760 mm︱rapid power traverse in X-and Z direction 18/24 m/min︱chucking diameter 250 mm︱bar material dia. 66 mm︱spindle drive 42 kW︱spindle speed: 3500 ︱max. torque on the spindle 730 ︱spindle nose ASA 8" A2 ︱turret stations / rotary tool stations 12/12 ︱RPM of rotary tools 80-4000 1/min︱tailstock quill taper MT MK4 ︱tailstock quill stroke 100 mm︱tailstock quill diameter 110 mm︱Tailstock Travel 990 mm︱bearing for center in tailstock spindle ︱total power requirement 70 kVA︱weight of the machine ca. 6.1 t︱

---

VERY NICE MACHINE ONLY 1900 SPINDEL HOURS SPINDEL BORE DIA 66 MM TURNING LENG 66 MM C AXIS MOWING TOOLS Y AXIS +40/-40MM FANUC 32 I CHIP CONVOYER

turning diameter 400 mm︱turning length 640 mm︱control FANUC 32 ITB ︱bar diameter 52 mm︱travel -x axis 310 mm︱travel -z axis 640 mm︱turning speed range - drive spindle 4500 1/min︱spindle nose JIS A2-6 ︱spindle bore 61 mm︱C-Axis 0,001° ︱spindle bearing diameter 100 mm︱turret head 12 Pos. ︱tool changing time 0,2 sec︱rapid traverse X-axis 30 m/min︱rapid traverse Z-axis 30 m/min︱drive capacity - spindle motor 15/11 kW︱total power requirement 35 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 2,7 x 2,2 x 1,9 m︱

---

VERY NICE MACHINE WITH FANUC 32 IT CHIP CONVOYOR SUP SPINDEL BAR FEEDER C AXIS AND Y AXIS + LIVE TOOLS

turning diameter 360 mm︱turning length 530 mm︱control SIEMENS 828D (10,4"DISPLA ︱swing diameter 690 mm︱swing diameter over bed slide 360 mm︱Bar capacity 64 mm︱spindle speeds 3500 1/min︱spindle speed Gegenspindel: 5000 1/min︱x-travel 230 mm︱y-travel ±51 mm︱z-travel 600 mm︱rapid power traverse in X-and Z direction 30 m/min︱spindle drive 17 (Hauptspindel) kW︱spindle drive 5,5/7,5 (Gegenspindel) kW︱Machine size (LxWxH) 3290x2180x2337 mm︱machine weight 6100 kg︱c-axis 0.001 °︱turret 12-fach, BMT-65 type mit ︱Y-axis über Revolver mm︱chip conveyor ︱

---

brand new CNC turning center with Contains: 1. Control system Fanuc Oi-TD (8,4" LCD monitor) 2. X/Z-axis stroke 200/600 mm 3. X/Z-axis rapid traverse 30/30 M/MIN 4. Spindle motor 11 / 15 Kw 5. Spindle speed 3500 rpm (Belt driven type) 6. Spindle bearing dia. Ø 120 mm 7. Bar capacity Ø dia 64 mm 8. CS axis function 0.001 degree spindle positioning 9. Hydraulic Hollow chuck 10" x 3 jaws 10. Hyd. unit for chuck with air cooler 11. Power turret system 12 stations with BMT65 radial type turret disc (Tongtai made) 12. Manual tailstock stroke 500 mm + quill stroke 100 mm 13. Electrical cabinet with heat exchanger 14. Standard splash guide 15. Coolant unit 16. Transformer (power source 380V) 17. Chip conveyor H=1100 MM with trolley (chain type) 18. Machine color Tongtai White/ Dark grey 19. Three color warning light 20. Safety foot switch 21. Fanuc warranty (western Europe) Standard accessories 1. Soft jaws x 1 set 2. Rotating center x 1 pc (MT#4) Options: 1. CE mark 2. Tool presetter (manual) 3. Part catcher 4. Workpiece conveyor 5. Bar feeder (BF-1200) 6. Hard jaws x 1 set 7. Soft jaws x 5 sets 8. Spindle insert for bar x 8 pcs ( Ø12, 16, 20, 26, 30, 38 mm) 9. Added collet chuck (With adapter) (Ortlieb KSFB 60/8 type) 10. Manual guide I function + 10.4" screen

turning diameter 240 mm︱turning length 500 mm︱control Sinumerik 840 D sl Celos︱swing diameter max. 510 mm︱Main spindle: ︱turning speed range - main spindle max. 5.500 min/-1︱power capacity - main spindel 14 / 13 kW︱max. Torque 192 / 172 Nm︱inner draw tube diameter 66 mm︱C-Axis 0,001 °︱spindle diameter in front bearing 100 mm︱max. chucking diameter 215 mm︱spindle nose 140H5 ︱turret: ︱number of toolpositions 12 pos.︱Number of driven toolspositions 12 pos.︱tool taper VDI 30 ︱Spindle speed - driven tool stations max. 5.000 min -1︱power capacity - driven tool-stations 5,4 kW︱max. Torque 18 Nm︱

---

CNC - Turning- and MillingCenter DMG GILDEMEISTER - CTX alpha 500 - Very good condition - only 4.400 spindle hours - incl. extensive tool package

turning diameter 280 mm︱turning length 250 mm︱control Fanuc 0i TF ︱swing diameter over bed slide 280 mm︱Bar capacity 44 mm︱spindle speeds 4800 1/min︱x-travel 155 mm︱y-travel +/-35 mm︱z-travel 250 mm︱rapid power traverse in X-and Z direction 30 m/min︱spindle drive 11/15 kW︱Machine size (LxWxH) 1.842x2.793x2.446 mm︱machine weight 5000 kg︱feeds 0.001-500 mm/U︱c-axis 0.001 °︱turret 16-fach, BMT-55 type ︱Y-axis über Revolver mm︱chip conveyor ︱hollow chuck hydr. 200 mm︱Tool setter ︱

---

brand new CNC turning center with Contains: 1. Control system Fanuc Oi-TD (8,4" LCD monitor) 2. X/Z-axis stroke 200/600 mm 3. X/Z-axis rapid traverse 30/30 M/MIN 4. Spindle motor 11 / 15 Kw 5. Spindle speed 3500 rpm (Belt driven type) 6. Spindle bearing dia. Ø 120 mm 7. Bar capacity Ø dia 64 mm 8. CS axis function 0.001 degree spindle positioning 9. Hydraulic Hollow chuck 10" x 3 jaws 10. Hyd. unit for chuck with air cooler 11. Power turret system 12 stations with BMT65 radial type turret disc (Tongtai made) 12. Manual tailstock stroke 500 mm + quill stroke 100 mm 13. Electrical cabinet with heat exchanger 14. Standard splash guide 15. Coolant unit 16. Transformer (power source 380V) 17. Chip conveyor H=1100 MM with trolley (chain type) 18. Machine color Tongtai White/ Dark grey 19. Three color warning light 20. Safety foot switch 21. Fanuc warranty (western Europe) Standard accessories 1. Soft jaws x 1 set 2. Rotating center x 1 pc (MT#4) Options: 1. CE mark 2. Tool presetter (manual) 3. Part catcher 4. Workpiece conveyor 5. Bar feeder (BF-1200) 6. Hard jaws x 1 set 7. Soft jaws x 5 sets 8. Spindle insert for bar x 8 pcs ( Ø12, 16, 20, 26, 30, 38 mm) 9. Added collet chuck (With adapter) (Ortlieb KSFB 60/8 type) 10. Manual guide I function + 10.4" screen

turning diameter 370 mm︱turning length 737 mm︱control FANUC 31 ITB ︱max. bar capacity 75 mm︱travel -y axis +50, -50 mm︱max. speed main spindle 3500 min-1︱spindle taper 1 A2-6 ︱C - Axis JA ︱no. of tools in turret 1 12 ︱drive capacity - spindle motor 26 kW︱power capacity - driven tools 6.7 kW︱total power requirement 40 kVA︱weight of the machine ca. 7 t︱dimensions of the machine ca. 53.5 X 2.1 X 2 m︱Chip conveyor ja / yes ︱

---

High Performance CNC Turning- and Milling Center with Y - Axis Chipconveyer, Counterspindle, driven tools, Y - Axis for eccentric Drilling and Milling works + - 60 mm C-Axis, screw brake, partcatcher, 3 driven tools as accessories, 10 static holder as accessories, , Toolsystem with one collet each for Main - and Subspindle, Tool Eye Measurement, Part catcher and part conveyer WHITOUT BAR LODER

turning diameter max. 410 mm︱turning length 800 mm︱control Sinumerik 840D sl Siemens︱greates pass round over bed 700 mm︱Main spindle: ︱turning speed range - main spindle 20 - 5.000 min/-1︱power capacity - main spindel 34 / 25 kW︱max. Torque 580 Nm︱C-Axis 360 °︱spindle nose 220h5 ︱chucking diameter 250 mm︱max. bar capacity 76 mm︱turret: ︱number of toolpositions 12 pos.︱Number of driven toolspositions 12 pos.︱power capacity driven tool-stations 14,2 kW︱Spindle speed - driven tool stations 40 - 10.000 min -1︱tool taper VDI 40 DIN69880︱max. Torque 34 Nm︱axis stroke: ︱

---

CNC - Turning- and Millingcenter DMG MORI - CTX beta 800 - Sinumerik Operate und ShopTurn 3G - Spindle ISM 76 - Y-Axis - WITH Tools + SUP SPINDEL

turning diameter max. 366 mm︱turning length 510 mm︱control ErgoLine CELOS︱greates pass round over bed 923,8 mm︱Swing dia. over traverse guideway 755 mm︱standard turning dia. 275 mm︱distance between spindles 500 mm︱Main spindle: ︱turning speed range - main spindle 5.000 min/-1︱power capacity - main spindel 15 / 11 kW︱spindle nose JIS A-6 ︱spindle bearing diameter 120 mm︱spindle bore 73 mm︱max. usable bar diameter 65 mm︱C-Axis 0,001 °︱chucking diameter ( - ) mm︱axis stroke: ︱x-travel 260 mm︱z-travel 590 mm︱Y - Axis (100) +/-50 mm︱

---

CNC - Turning- and MillingCenter DMG MORI - NLX 2000 Y / 500 - C-Axis - Y-Axis - Tool-Drive - WITHOUT Toolholders!