,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Lathes

          Machinelist: Lathes


          Automatic Curve Lathe

          used Lathes Automatic Curve Lathe WACHTLER A25 GLE


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1239 · Automatic Curve Lathe

          WACHTLER - A25 GLE - - 2018 -

          Technical details
          - - - - - Main spindle - - - - - - - - - - -︱hollow 25 mm︱--- Subspindle --- - - - - - -︱hollow 15 mm︱turning speed range 1.400 - 2.800 U/min︱
          Single spindle automatic lathe WACHTLER - A25 GLE with bar feeder Further information / scope of delivery: All accessories are included. The machine is in a well-maintained condition. Please refer to the offer for further technical details. Machine video available on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: A 25 | A-25 | A25GLE
            - - - - - Main spindle - - - - - - - - - - -
            hollow 25 mm
            --- Subspindle --- - - - - - -
            hollow 15 mm
            turning speed range 1.400 - 2.800 U/min
            Description :
            Single spindle automatic lathe WACHTLER - A25 GLE with bar feeder


            Further information / scope of delivery:

            All accessories are included.

            The machine is in a well-maintained condition.


            Please refer to the offer for further technical details.

            Machine video available on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: A 25 | A-25 | A25GLE


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact

          CNC Lathe

          used Lathes CNC Lathe müga GTA4-42S


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1654 · CNC Lathe

          müga - GTA4-42S - - 2011 - MITSUBUSHI M70

          Technical details
          bar capacity 42 mm︱Max. Turning length 100 mm︱control MITSUBUSHI M70 ︱turning speed range - spindle 100 - 4.000 U/min︱Number of axles 4 St.︱
          CNC lathe | müga - GTA4-42S equipped with chip conveyor. The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GTA 4 | GTA4 42S | GTA-4 | GTA 4 42 S
            bar capacity 42 mm
            Max. Turning length 100 mm
            control MITSUBUSHI M70
            turning speed range - spindle 100 - 4.000 U/min
            Number of axles 4 St.
            Description :
            CNC lathe | müga - GTA4-42S equipped with chip conveyor.


            The machine is in very good condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: GTA 4 | GTA4 42S | GTA-4 | GTA 4 42 S


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe COLCHESTER TORNADO T6MS


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1536 · CNC Lathe

          COLCHESTER - TORNADO T6MS - - 2010 - Fanuc 18i-TB

          Technical details
          swing dia. 440 mm︱max. turning diameter 220 mm︱turning length 450 mm︱travel -x axis 200 mm︱control Fanuc 18i-TB ︱max. helix angle 60 °︱spindle bore 64 mm︱tool taper VDI 30 ︱numbers of positions in the tool changer 12
          CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6
            swing dia. 440 mm
            max. turning diameter 220 mm
            turning length 450 mm
            travel -x axis 200 mm
            control Fanuc 18i-TB
            max. helix angle 60 °
            spindle bore 64 mm
            tool taper VDI 30
            numbers of positions in the tool. 12
            Description :
            CNC Lathe | COLCHESTER - TORNADO T6MS
            equipped with counter spindle and chip conveyor.


            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe COLCHESTER TORNADO TT6MSY Twin Turret


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1533 · CNC Lathe

          COLCHESTER - TORNADO TT6MSY Twin Turret - - 2009 - FANUC 31i-A

          Technical details
          swing dia. 606 mm︱max. turning diameter 170 mm︱control FANUC 31i-A ︱travel -x1 axis 195 - 205 mm︱travel -y1 axis 80 (+/- 40) mm︱travel -z1 axis 583 mm︱travel -x2 axis 153 - 163 mm︱spindle bore 64 mm︱number of spindle speeds 6.000 U/min︱Automatic tool changer with driven tools 12 Stk. / pcs.︱tool taper 30 VDI
          CNC Lathe | COLCHESTER - TORNADO T8MS Twin Turret The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TT-6MS | TT 6MS | TT 6 MS | TT-6
            swing dia. 606 mm
            max. turning diameter 170 mm
            control FANUC 31i-A
            travel -x1 axis 195 - 205 mm
            travel -y1 axis 80 (+/- 40) mm
            travel -z1 axis 583 mm
            travel -x2 axis 153 - 163 mm
            spindle bore 64 mm
            number of spindle speeds 6.000 U/min
            Automatic tool changer with driv. 12 Stk. / pcs.
            tool taper 30 VDI
            Description :
            CNC Lathe | COLCHESTER - TORNADO T8MS Twin Turret

            The machine is in good condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: TT-6MS | TT 6MS | TT 6 MS | TT-6


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Lathe COLCHESTER TORNADO T8


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1529 · CNC Lathe

          COLCHESTER - TORNADO T8 - - 2008 - FANUC 21i-TB

          Technical details
          max. swing diameter over bed 510 mm︱max. turning diameter 260 mm︱Max. Turning length 540 mm︱travel -x axis 240 mm︱center height over bed 260 mm︱control FANUC 21i-TB ︱spindle bore 77,5 mm︱no. of tools in turret 12 x︱tool taper VDI 40
          CNC Lathe | COLCHESTER - TORNADO T8 The machine is in good condition. Please refer to further technical details in the attachement of the offer. A machine video will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T 8 | T-8
            max. swing diameter over bed 510 mm
            max. turning diameter 260 mm
            Max. Turning length 540 mm
            travel -x axis 240 mm
            center height over bed 260 mm
            control FANUC 21i-TB
            spindle bore 77,5 mm
            no. of tools in turret 12 x
            tool taper VDI 40
            Description :
            CNC Lathe | COLCHESTER - TORNADO T8


            The machine is in good condition.

            Please refer to further technical details in the attachement of the offer.

            A machine video will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: T 8 | T-8


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact

          CNC Turning & Grinding Center - vertical

          used Lathes CNC Turning & Grinding Center - vertical EMAG VSC 400 DDS


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1308 · CNC Turning & Grinding Center - vertical

          EMAG - VSC 400 DDS - - 2010 - SIEMENS 840D

          Technical details
          max. swing over bed 260 mm︱max. turning diameter 315 mm︱control SIEMENS 840D ︱spindle bore 50 mm︱spindle diameter in front bearing 100 mm︱Torque 460 Nm︱chucking diameter 200 / 250 mm︱with 1-bed slide ︱number of cross-slides 1 ︱tool taper HSK C63 ︱numbers of positions in the tool changer 12 ︱max. tool diameter 40 mm︱Dimensions (L x W x H) 5.500 x 11.600 x 3.300 mm︱weight of the machine 12.500 kg︱
          6-axis vertical CNC Turning & Grinding Center | EMAG - VSC 400 DDS Additional equipment: - Robotorsierte Werkstückladeeinheit (AMT Automation with Kuka) The machine is in very good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VSC400DDS | VSC400 DDS | VSC-400 DDS | VSC 400DDS | VSC 400-DDS
            max. swing over bed 260 mm
            max. turning diameter 315 mm
            control SIEMENS 840D
            spindle bore 50 mm
            spindle diameter in front bearin. 100 mm
            Torque 460 Nm
            chucking diameter 200 / 250 mm
            number of cross-slides 1
            tool taper HSK C63
            numbers of positions in the tool. 12
            max. tool diameter 40 mm
            Dimensions (L x W x H) 5.500 x 11.600 x 3.300 mm
            weight of the machine 12.500 kg
            Description :
            6-axis vertical CNC Turning & Grinding Center | EMAG - VSC 400 DDS


            Additional equipment:

            - Robotorsierte Werkstückladeeinheit (AMT Automation with Kuka)

            The machine is in very good condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VSC400DDS | VSC400 DDS | VSC-400 DDS | VSC 400DDS | VSC 400-DDS


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used Lathes CNC Turning- and Milling Center INDEX G400 S-1/300


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1044 · CNC Turning- and Milling Center

          INDEX - G400 S-1/300 - - 2011 - INDEX - C200-4D

          Technical details
          work travel X:320 & Z:1250 mm︱rapid traverse X:20 & Z:40 m/min︱control INDEX - C200-4D ︱--- MOTOR MILLING SPINDLE --- ------------------------- ︱tool taper HSK A63 ︱turning speeds 12000 U/min︱Power 27,5 KW︱front bearing 80 mm︱turning speeds 3000 U/min︱MAIN SPINDLE D102 direct drive ------------------------- ︱spindle diameter in front bearing 1200 mm︱spindle passage 102 mm︱forward bearing diameter 170 mm︱
          CNC Turning- and Milling Center | INDEX - G400 S-1/300 The machine is in a very good condition with only 2500 H main working hours. + MARPOSS probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G400 | G 400 | G400 S1 300 | G400S1 300
            work travel X:320 & Z:1250 mm
            rapid traverse X:20 & Z:40 m/min
            control INDEX - C200-4D
            --- MOTOR MILLING SPINDLE --- -------------------------
            tool taper HSK A63
            turning speeds 12000 U/min
            Power 27,5 KW
            front bearing 80 mm
            turning speeds 3000 U/min
            MAIN SPINDLE D102 direct drive -------------------------
            spindle diameter in front bearin. 1200 mm
            spindle passage 102 mm
            forward bearing diameter 170 mm
            Description :
            CNC Turning- and Milling Center | INDEX - G400 S-1/300

            The machine is in a very good condition
            with only 2500 H main working hours.

            + MARPOSS probe

            The machine is in a well-maintained condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: G400 | G 400 | G400 S1 300 | G400S1 300


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DOOSAN PUMA MX 2100 ST


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1538 · CNC Turning- and Milling Center

          DOOSAN - PUMA MX 2100 ST - - 2010 - FANUC 31i-B

          Technical details
          swing over bed 750 mm︱Swing over cross slide 650 mm︱max. turning diameter 540 mm︱Max. Turning length 1.020 mm︱bar material dia. 65 mm︱control FANUC 31i-B ︱Dimensions (L x W x H) 4.850 x 2.525 x 2.805 mm︱weight of the machine 12.000 kg︱
          CNC Turning- and Milling Center | DOOSAN - PUMA MX 2100 ST equipped with chip conveyor. Additional equipment: + counter spindle + B axis The machine is in good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MX2100ST | MX-2100 ST | MX 2100ST | MX2100 ST
            swing over bed 750 mm
            Swing over cross slide 650 mm
            max. turning diameter 540 mm
            Max. Turning length 1.020 mm
            bar material dia. 65 mm
            control FANUC 31i-B
            Dimensions (L x W x H) 4.850 x 2.525 x 2.805 mm
            weight of the machine 12.000 kg
            Description :
            CNC Turning- and Milling Center | DOOSAN - PUMA MX 2100 ST
            equipped with chip conveyor.


            Additional equipment:

            + counter spindle
            + B axis


            The machine is in good condition.

            A machine video from the production plant will be shared on request.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: MX2100ST | MX-2100 ST | MX 2100ST | MX2100 ST


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center INDEX C100


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1663 · CNC Turning- and Milling Center

          INDEX - C100 - - 2008 - Siemens - Sinumerik

          Technical details
          --- Main- / Counter- spindle --- - - - - - -︱hollow 42 mm︱spindle diameter in front bearing 75 mm︱- - - - - General data - - - - - - - - - - -︱control Siemens - Sinumerik ︱no. of tools in turret 1 10 Stk./pcs.︱no. of tools in turret 2 10 Stk./pcs.︱no. of tools in turret 3 10 Stk./pcs.︱Tools speed 8.000 U/min︱- - - - - travels - - - - - - - - - - -︱travel -x axis 70 mm︱travel -y axis 70 (+/-35) mm︱travel -z axis 250 mm︱travel -x2 axis 70 mm︱travel -y2 axis 70 (+/-35) mm︱travel -z2 axis 400 mm︱travel -x3 axis 125 mm︱
          CNC Turning- and Milling Center | INDEX - C100 equipped with a turret for driven tools as well as chip conveyors and bar feeder. The machine is in a well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 100 | C-100
            --- Main- / Counter- spindle --- - - - - - -
            hollow 42 mm
            spindle diameter in front bearin. 75 mm
            - - - - - General data - - - - - - - - - - -
            control Siemens - Sinumerik
            no. of tools in turret 1 10 Stk./pcs.
            no. of tools in turret 2 10 Stk./pcs.
            no. of tools in turret 3 10 Stk./pcs.
            Tools speed 8.000 U/min
            - - - - - travels - - - - - - - - - - -
            travel -x axis 70 mm
            travel -y axis 70 (+/-35) mm
            travel -z axis 250 mm
            travel -x2 axis 70 mm
            travel -y2 axis 70 (+/-35) mm
            travel -z2 axis 400 mm
            travel -x3 axis 125 mm
            Description :
            CNC Turning- and Milling Center | INDEX - C100 equipped with a turret for
            driven tools as well as chip conveyors and bar feeder.

            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            A machine video from the production plant will be shared on request.

            Please refer to further technical details in the attachement of the offer.
            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: C 100 | C-100


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MAZAK QTN 350 II M


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1639 · CNC Turning- and Milling Center

          MAZAK - QTN 350 II M - - 2007 - Mazatrol Nexus

          Technical details
          turning diameter 420 mm︱centre distance 1500 mm︱control Mazatrol Nexus ︱bar capacity 102 mm︱turning speeds 35 - 3.300 U/min︱spindle bore 112 mm︱numbers of turret head positions 12
          CNC Turning- and Milling Center | MAZAK - QTN 350 II M Scope of delivery: driven tools - 1x straight - 1x angle The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: QUICK TURN | NEXUS 350 | NEXUS350 | QTN350M
            turning diameter 420 mm
            centre distance 1500 mm
            control Mazatrol Nexus
            bar capacity 102 mm
            turning speeds 35 - 3.300 U/min
            spindle bore 112 mm
            numbers of turret head positions 12
            Description :
            CNC Turning- and Milling Center | MAZAK - QTN 350 II M


            Scope of delivery:
            driven tools
            - 1x straight
            - 1x angle

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: QUICK TURN | NEXUS 350 | NEXUS350 | QTN350M


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DOOSAN PUMA MX 2000 S


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1539 · CNC Turning- and Milling Center

          DOOSAN - PUMA MX 2000 S - - 2005 - FANUC 18i-TB

          Technical details
          max. turning diameter 540 mm︱max. turning length 1.020 mm︱bar capacity 65 mm︱Spindle speed 5.000 min -1︱driven tools turning speeds 10.000 U/min︱control FANUC 18i-TB ︱Dimensions (L x W x H) 4.520 x 2.300 x 2.600 mm︱machine weight ab. 12.000 kg︱
          CNC Turning- and Milling Center | DOOSAN - PUMA MX 2000 S equipped with chip conveyor. Additional equipment: + counter spindle + B axis The machine is in good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MX2000S | MX-2000 S | MX 2000S | MX2000 S
            max. turning diameter 540 mm
            max. turning length 1.020 mm
            bar capacity 65 mm
            Spindle speed 5.000 min -1
            driven tools turning speeds 10.000 U/min
            control FANUC 18i-TB
            Dimensions (L x W x H) 4.520 x 2.300 x 2.600 mm
            machine weight ab. 12.000 kg
            Description :
            CNC Turning- and Milling Center | DOOSAN - PUMA MX 2000 S
            equipped with chip conveyor.


            Additional equipment:

            + counter spindle
            + B axis


            The machine is in good condition.

            A machine video from the production plant will be shared on request.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: MX2000S | MX-2000 S | MX 2000S | MX2000 S


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center OKUMA MacTurn250-W


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1599 · CNC Turning- and Milling Center

          OKUMA - MacTurn250-W - - 2004 - OKUMA OSP-U100L

          Technical details
          swing over bed 550 mm︱Swing over cross slide 530 mm︱control OKUMA OSP-U100L ︱travel -x1 axis 475 mm︱travel -x2 axis 160 mm︱travel -z1 axis 1.170 mm︱travel -z2 axis 1.155 mm︱travel -y axis 160 mm︱travel C - axis 360° °︱travel B' - axis 210° °︱numbers of positions in the tool changer 84 ︱number of tapers in turret head 12 ︱Dimensions (L x W x H) 4.320 x 2.645 x 2.900 mm︱weight of the machine 12.500 kg︱
          CNC Turning- and Milling Center | OKUMA - MacTurn250-W with palletizing system and robot handling The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MacTurn250 | MacTurn250 W | MacTurn 250 | MacTurn-250
            swing over bed 550 mm
            Swing over cross slide 530 mm
            control OKUMA OSP-U100L
            travel -x1 axis 475 mm
            travel -x2 axis 160 mm
            travel -z1 axis 1.170 mm
            travel -z2 axis 1.155 mm
            travel -y axis 160 mm
            travel C - axis 360° °
            travel B' - axis 210° °
            numbers of positions in the tool. 84
            number of tapers in turret head 12
            Dimensions (L x W x H) 4.320 x 2.645 x 2.900 mm
            weight of the machine 12.500 kg
            Description :
            CNC Turning- and Milling Center | OKUMA - MacTurn250-W
            with palletizing system and robot handling


            The machine is in a well-maintained condition.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: MacTurn250 | MacTurn250 W | MacTurn 250 | MacTurn-250


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center NAKAMURA TOME WT-250 MMY


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1661 · CNC Turning- and Milling Center

          NAKAMURA TOME - WT-250 MMY - - 2003 - Fanuc 18i TB

          Technical details
          swivelling range 250 mm︱max. working diameter 210 mm︱max. working lenght 555 mm︱control Fanuc 18i TB ︱spindle taper JIS A2-6“ ︱spindle diameter 71 mm︱number of spindle speeds 5.000 U/min︱
          CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY equipped with bar loader (Profimat) Equipment/accessories: - Bar loader - driven tool holders Further technical data: - Chuck size: Hainbuch collets - Distance between spindle end faces: 555 mm - Max. outside diameter for bar material: 65 mm - Spindle power 1 = 11 / 15 kW - Spindle power 2 = 7.5 / 11 kW - Max. torque: Nm 265 (kgf-m 27) The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: WT-250MMY | WT 250MMY | WT250MMY
            swivelling range 250 mm
            max. working diameter 210 mm
            max. working lenght 555 mm
            control Fanuc 18i TB
            spindle taper JIS A2-6“
            spindle diameter 71 mm
            number of spindle speeds 5.000 U/min
            Description :
            CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY equipped
            with bar loader (Profimat)


            Equipment/accessories:
            - Bar loader
            - driven tool holders


            Further technical data:
            - Chuck size: Hainbuch collets
            - Distance between spindle end faces: 555 mm
            - Max. outside diameter for bar material: 65 mm
            - Spindle power 1 = 11 / 15 kW
            - Spindle power 2 = 7.5 / 11 kW
            - Max. torque: Nm 265 (kgf-m 27)


            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: WT-250MMY | WT 250MMY | WT250MMY


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center JOHNFORD SL-50-CF-Y


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1540 · CNC Turning- and Milling Center

          JOHNFORD - SL-50-CF-Y - - 2003 - FANUC Oi-TB

          Technical details
          bar material dia. 75 mm︱max. max. swing dia. 540 mm︱turning length 650 mm︱control FANUC Oi-TB ︱machine weight ab. 6.200 kg︱
          CNC Turning- and Milling Center | JOHNFORD - SL-50-CF-Y equipped with chip conveyor and bar feeder. Additional equipment: + C axis + Y axis + driven tools The machine is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SL 50 | SL50 | SL-50 CF Y | SL50 CF Y
            bar material dia. 75 mm
            max. max. swing dia. 540 mm
            turning length 650 mm
            control FANUC Oi-TB
            machine weight ab. 6.200 kg
            Description :
            CNC Turning- and Milling Center | JOHNFORD - SL-50-CF-Y
            equipped with chip conveyor and bar feeder.


            Additional equipment:

            + C axis
            + Y axis
            + driven tools

            The machine is in good condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: SL 50 | SL50 | SL-50 CF Y | SL50 CF Y


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER SPRINT 32 linear


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1525 · CNC Turning- and Milling Center

          GILDEMEISTER - SPRINT 32 linear - - 2003 - FANUC

          Technical details
          max. turning diameter 33 mm︱max. turning speeds 8.000 U/min︱Number of axles 8 St.︱turning speed rotating tools 6.000 U/min︱control FANUC ︱Dimensions (L x W x H) 4.020 x 1.850 x 1.925 mm︱machine weight ab. 4.200 kg︱
          CNC Turning- and Milling Center | GILDEMEISTER - SPRINT 32 linear equipped with C-axis for mainspindle and counter-spindle and bar feeder Iemca Further information: - collet holder for main and pick up spindle - 5 position 16x16 toolholder for slide 1 - 3 driven tools on slide 1 with spindles ESX16 - drive for rotating tools slide 2 - 4-pos.tool holder diam.32mm for slide - 2-chip conveyor h=1100 mm - pneum. ejector and unloading system with belt -pneum. - cleaning system for counterspindle¬ - collet - Mechanical preparation for oil mist filter - electr. and software preparation for bar loader – synchronization between main and counter spindle - constant cutting speed and rigid tapping - spindle speed control - piece/time counter - Software for bar-feeding in overlapped time - Load Monitor software (tool effort management) - manuals The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 32linear | SPRINT32linear | 32-linear
            max. turning diameter 33 mm
            max. turning speeds 8.000 U/min
            Number of axles 8 St.
            turning speed rotating tools 6.000 U/min
            control FANUC
            Dimensions (L x W x H) 4.020 x 1.850 x 1.925 mm
            machine weight ab. 4.200 kg
            Description :
            CNC Turning- and Milling Center | GILDEMEISTER - SPRINT 32 linear
            equipped with C-axis for mainspindle and counter-spindle and bar feeder Iemca


            Further information:

            - collet holder for main and pick up spindle
            - 5 position 16x16 toolholder for slide 1
            - 3 driven tools on slide 1 with spindles ESX16
            - drive for rotating tools slide 2
            - 4-pos.tool holder diam.32mm for slide
            - 2-chip conveyor h=1100 mm
            - pneum. ejector and unloading system with belt -pneum.
            - cleaning system for counterspindle¬ - collet
            - Mechanical preparation for oil mist filter
            - electr. and software preparation for bar loader
            – synchronization between main and counter spindle
            - constant cutting speed and rigid tapping
            - spindle speed control
            - piece/time counter
            - Software for bar-feeding in overlapped time
            - Load Monitor software (tool effort management)
            - manuals

            The machine is in good condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: 32linear | SPRINT32linear | 32-linear


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center INDEX G300


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1364 · CNC Turning- and Milling Center

          INDEX - G300 - - 2000 - Siemens C 200-4

          Technical details
          travel -x axis 140 mm︱travel -z axis 710 mm︱control Siemens C 200-4 ︱main spindle speeds 5.000 U/min︱bore diameter 65 mm︱numbers of positions in the tool changer 24 (2x12)
          CNC Turning- and Milling Center | INDEX - G300 + 2 turret + tailstock + bar feeder: Index MBL 65 Scope of delivery: - tool holder fixed The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G 300 | G-300
            travel -x axis 140 mm
            travel -z axis 710 mm
            control Siemens C 200-4
            main spindle speeds 5.000 U/min
            bore diameter 65 mm
            numbers of positions in the tool. 24 (2x12)
            Description :
            CNC Turning- and Milling Center | INDEX - G300

            + 2 turret
            + tailstock
            + bar feeder: Index MBL 65

            Scope of delivery:
            - tool holder fixed


            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: G 300 | G-300



        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center NAKAMURA TOME WT-250 MMY


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1662 · CNC Turning- and Milling Center

          NAKAMURA TOME - WT-250 MMY - - 1999 - FANUC 18i-T

          Technical details
          spindle passage H: 65 / G: 51 mm︱numbers of positions in the tool changer 2x12 ︱control FANUC 18i-T ︱tool taper BMT55 ︱collet chuck Hainbuch (RD65)
          CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY equipped with tool changer and measuring system. Equipment/accessories: - parts gripper - small package of tools (2x radial & 2x axial driven tools + various passive holders) The machine is in a well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: WT-250MMY | WT 250MMY | WT250MMY
            spindle passage H: 65 / G: 51 mm
            numbers of positions in the tool. 2x12
            control FANUC 18i-T
            tool taper BMT55
            collet chuck Hainbuch (RD65)
            Description :
            CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY
            equipped with tool changer and measuring system.


            Equipment/accessories:
            - parts gripper
            - small package of tools
            (2x radial & 2x axial driven tools + various passive holders)


            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: WT-250MMY | WT 250MMY | WT250MMY


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact

          Facing Lathe

          used Lathes Facing Lathe ZERBST DP05/W08


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1376 · Facing Lathe

          ZERBST - DP05/W08 - - 1985 - 2010 - Siemens Sinumerik 840D-sl

          Technical details
          faceplate diameter 4.000 mm︱travel -x axis 4.500 mm︱travel -z axis 600 mm︱control Siemens Sinumerik 840D-sl ︱feed range 0 - 8.000 mm/min︱turning speeds 1) 0,7 - 5,6 U/min︱turning speeds 2) 2,8 - 22,4 U/min︱turning speeds 2,1 - 56 U/min︱tool taper Sauter
          Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08
            faceplate diameter 4.000 mm
            travel -x axis 4.500 mm
            travel -z axis 600 mm
            control Siemens Sinumerik 840D-sl
            feed range 0 - 8.000 mm/min
            turning speeds 1) 0,7 - 5,6 U/min
            turning speeds 2) 2,8 - 22,4 U/min
            turning speeds 2,1 - 56 U/min
            tool taper Sauter
            Description :
            Facing Lathe | ZERBST - DP05/W08

            Scope of delivery:

            - Chip conveyor
            - Hydraulic unit

            The ZERBST - DP05/W08 has been retrofitted in 2010.

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: DP05W08 | DP05 W08 | DP05-W08


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used Lathes Lathe -  cycle-controlled HARRISON ALPHA 2800XS


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1528 · Lathe - cycle-controlled

          HARRISON - ALPHA 2800XS - - 2010 - FANUC 21i-TB

          Technical details
          turning length 1.200 mm︱Height of centres 400 mm︱swing over bed 800 mm︱diameter over cross-slide max. 510 mm︱control FANUC 21i-TB ︱spindle bore 250 mm︱
          Lathe - cycle-controlled | HARRISON - ALPHA 2800XS The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: a 2800XS | ALPHA2800XS | ALPHA-2800XS | ALPHA 2800 | ALPHA2800 | ALPHA- 2800
            turning length 1.200 mm
            Height of centres 400 mm
            swing over bed 800 mm
            diameter over cross-slide max. 510 mm
            control FANUC 21i-TB
            spindle bore 250 mm
            Description :
            Lathe - cycle-controlled | HARRISON - ALPHA 2800XS


            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: a 2800XS | ALPHA2800XS | ALPHA-2800XS | ALPHA 2800 | ALPHA2800 | ALPHA-
            2800


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact

          Turning Automatic Lathe - swiss lathe

          used Lathes Turning Automatic Lathe - swiss lathe muega TT-42


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1610 · Turning Automatic Lathe - swiss lathe

          muega - TT-42 - - 2011 -

          Technical details
          --- Main- / Counter- spindle --- - - - - - -︱bar capacity 42 mm︱max. turning diameter 100 mm︱Max. Turning length 100 mm︱number of spindle speeds 4.000 U/min︱--- Subspindle --- - - - - - -︱spindle bore 30 mm︱- - - - - General data - - - - - - - - - - -︱Number of axles 12 St.︱travel -x axis 150 mm︱travel -y axis 410 mm︱travel -z axis 190 mm︱travel -x1 axis 380 mm︱travel -y1 axis 400 mm︱travel -z1 axis 340 mm︱numbers of positions in the tool changer 29 Stk./pcs.︱number of driven tools 12 Stk./pcs.︱
          Turning Automatic Lathe - swiss lathe | müga - TT-42 equipped with chip conveyor and bar feeder. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TT 42 | TT42 | müga TT-42 | müga TT42 | müga TT 42
            --- Main- / Counter- spindle --- - - - - - -
            bar capacity 42 mm
            max. turning diameter 100 mm
            Max. Turning length 100 mm
            number of spindle speeds 4.000 U/min
            --- Subspindle --- - - - - - -
            spindle bore 30 mm
            - - - - - General data - - - - - - - - - - -
            Number of axles 12 St.
            travel -x axis 150 mm
            travel -y axis 410 mm
            travel -z axis 190 mm
            travel -x1 axis 380 mm
            travel -y1 axis 400 mm
            travel -z1 axis 340 mm
            numbers of positions in the tool. 29 Stk./pcs.
            number of driven tools 12 Stk./pcs.
            Description :
            Turning Automatic Lathe - swiss lathe | müga - TT-42
            equipped with chip conveyor and bar feeder.

            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            Please refer to further technical details in the attachement of the offer.
            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: TT 42 | TT42 | müga TT-42 | müga TT42 | müga TT 42


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Turning Automatic Lathe - swiss lathe DMG SPRINT 42 linear


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1625 · Turning Automatic Lathe - swiss lathe

          DMG - SPRINT 42 linear - - 2005 -

          Technical details
          - - - - - - - - -︱- - - - - - - - -︱- - - - - - - - -︱
          Turning Automatic Lathe - swiss lathe | DMG - SPRINT 42 linear The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear
            - - - - - - - - -
            - - - - - - - - -
            - - - - - - - - -
            Description :
            Turning Automatic Lathe - swiss lathe | DMG - SPRINT 42 linear


            The machine is in a well-maintained condition.

            Technical data of the machine will follow soon.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: Sprint42 | Sprint-42 | 42linear


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Turning Automatic Lathe - swiss lathe DMG SPRINT 42 linear


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1624 · Turning Automatic Lathe - swiss lathe

          DMG - SPRINT 42 linear - - 2005 -

          Technical details
          - - - - - - - - -︱- - - - - - - - -︱- - - - - - - - -︱
          Turning Automatic Lathe - swiss lathe | DMG - SPRINT 42 linear The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear
            - - - - - - - - -
            - - - - - - - - -
            - - - - - - - - -
            Description :
            Turning Automatic Lathe - swiss lathe | DMG - SPRINT 42 linear


            The machine is in a well-maintained condition.

            Technical data of the machine will follow soon.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: Sprint42 | Sprint-42 | 42linear


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Turning Automatic Lathe - swiss lathe TORNOS-BECHLER DECO-13


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1667 · Turning Automatic Lathe - swiss lathe

          TORNOS-BECHLER - DECO-13 - - 2001 - FANUC

          Technical details
          bar capacity 1 - 16 mm︱Turning speeds mainspindle 12.000 U/min︱control FANUC ︱Number of axles 10 St.︱Dimensions (L x W x H) 2.000 x 1.260 x 1.950 mm︱
          Lathe - swiss lathe | TORNOS-BECHLER - DECO-13 Main equipment: 10 axes, 3(6) spindles: - 1 movable headstock: Z1, S1 - 2 independent linear tool systems on the vertical: X1/Y1 (S6)-X2/Y2, S2 - 1 front attachment 4 spindles: X3/Z3 (S3) - 1 independent pick-off spindle: Y4 / Z4, S4 - 1 independent tool system in backside machining: X4 (S5) The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DECO13 | DECO 13
            bar capacity 1 - 16 mm
            Turning speeds mainspindle 12.000 U/min
            control FANUC
            Number of axles 10 St.
            Dimensions (L x W x H) 2.000 x 1.260 x 1.950 mm
            Description :
            Lathe - swiss lathe | TORNOS-BECHLER - DECO-13


            Main equipment: 10 axes, 3(6) spindles:

            - 1 movable headstock: Z1, S1
            - 2 independent linear tool systems on the vertical: X1/Y1 (S6)-X2/Y2, S2
            - 1 front attachment 4 spindles: X3/Z3 (S3)
            - 1 independent pick-off spindle: Y4 / Z4, S4
            - 1 independent tool system in backside machining: X4 (S5)

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: DECO13 | DECO 13


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Turning Automatic Lathe - swiss lathe STAR SR 32


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1617 · Turning Automatic Lathe - swiss lathe

          STAR - SR 32 - - 1997 - Fanuc Series 16-T

          Technical details
          Control Fanuc Series 16-T ︱bar capacity 32 mm︱- - - - - - - - -︱
          Turning Automatic Lathe - swiss lathe | STAR - SR 32 The machine is in clean condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SR32 | SR-32
            Control Fanuc Series 16-T
            bar capacity 32 mm
            - - - - - - - - -
            Description :
            Turning Automatic Lathe - swiss lathe | STAR - SR 32


            The machine is in clean condition.


            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: SR32 | SR-32


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   


          Find the best used lathes and more at LagerMaschinen
          Lathes offer versatility and efficiency to your workshop

          Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.

          LagerMaschinen - your home for used machines

          Lathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.

          Buying used machines is a smart investment

          Smart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.