,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Machines available immediately

          Machinelist: Machines disponibles immédiatement


          used Machines available immediately Center Lathe HUVEMA C 400 x 1000 TS VAC
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          HUVEMA C 400 x 1000 TS VAC
          Center Lathe

          2019

          turning diameter over bed 400 mm
          turning diameter over slide rest 235 mm
          turning length 1000 mm
          HUVEMA - C 400 x 1000 TS VAC
          Center Lathe
          Request / Contact
          used Machines available immediately lathe-conventional-electronic HUVEMA HU 360 VAC x 1000
          A + B Werkzeuge Maschinen Handels GmbH   Ahaus Rottweg 17 Deutschland

          A + B Werkzeuge Maschinen Handels GmbH
          HUVEMA HU 360 VAC x 1000
          lathe-conventional-electronic

          turning length 1000 mm
          turning diameter over bed 356 mm
          turning diameter over slide rest 220 mm
          HUVEMA - HU 360 VAC x 1000
          lathe-conventional-electronic
          Request / Contact
          used Machines available immediately lathe-conventional-electronic HUVEMA HU 410 x 1500
          Jansen Machinehandel BV   Etten-leur Bredaseweg 210 Nederland

          Jansen Machinehandel BV
          HUVEMA HU 410 x 1500
          lathe-conventional-electronic

          Distance between centers 1.500 mm
          Centre height 205 mm
          Swing over bed 410 mm ø
          HUVEMA - HU 410 x 1500
          lathe-conventional-electronic
          Request / Contact
          used Machines available immediately Mechanician s Lathe HUVEMA HU 360x1000 VAC Topline
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          HUVEMA HU 360x1000 VAC Topline
          Mechanician s Lathe

          2019

          turning diameter over bed 360 mm
          turning diameter over slide rest 220 mm
          turning length 1000 mm
          HUVEMA - HU 360x1000 VAC Topline
          Mechanician s Lathe
          Request / Contact
          used Machines available immediately Mechanician s Lathe HUVEMA HU 360x1000 VAC Sino
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          HUVEMA HU 360x1000 VAC Sino
          Mechanician s Lathe

          2019

          turning diameter over bed 360 mm
          turning diameter over slide rest 220 mm
          turning length 1000 mm
          HUVEMA - HU 360x1000 VAC Sino
          Mechanician s Lathe
          Request / Contact
          used Machines available immediately Mechanician s Lathe HUVEMA BL 310x900 Vario
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          HUVEMA BL 310x900 Vario
          Mechanician s Lathe

          2019

          turning diameter over bed 310 mm
          turning diameter over slide rest 178 mm
          turning length 910 mm
          HUVEMA - BL 310x900 Vario
          Mechanician s Lathe
          Request / Contact
          used Machines available immediately Bench Drilling Machine HUVEMA HU 50G-4 Topline
          Jansen Machinehandel BV   Etten-leur Bredaseweg 210 Nederland

          Jansen Machinehandel BV
          HUVEMA HU 50G-4 Topline
          Bench Drilling Machine

          2017

          Capacity 50 mm ø
          Spindle taper MK 40
          Machine weight 750 kg
          HUVEMA - HU 50G-4 Topline
          Bench Drilling Machine
          Request / Contact
          used Machines available immediately Drilling and Milling M/C HUVEMA HU.25 VHG
          WMT GmbH  &  Co.kg   Velen-Ramsdorf Siemensstraße 1 Deutschland

          WMT GmbH & Co.KG
          HUVEMA HU.25 VHG
          Drilling and Milling M/C

          2006

          bore capacity in steel (diameter) 25 mm
          bore stroke 150 mm
          spindle taper ISO 40
          HUVEMA - HU.25 VHG
          Drilling and Milling M/C
          Request / Contact
          used Machines available immediately Drilling and Milling M/C HURTH V 11
          Emuk Maschinenhandel GmbH   Malsch Siemensstrasse 24 Deutschland

          Emuk Maschinenhandel GmbH
          HURTH V 11
          Drilling and Milling M/C

          bore capacity in steel (diameter) 50 mm
          x-travel 400 mm
          y-travel 260 mm
          HURTH - V 11
          Drilling and Milling M/C
          Request / Contact
          used Machines available immediately Pillar Drilling Machine Huvema HU 25 TK
          Valk Machines BV   Lemmer Kadijk 6 Niederlande

          Valk Machines BV
          Huvema HU 25 TK
          Pillar Drilling Machine

          2001

          bore capacity in steel (diameter) 25 mm
          throat 225 mm

          Huvema - HU 25 TK
          Pillar Drilling Machine
          Request / Contact
          used Machines available immediately Radial Drilling Machine HUVEMA CRDM 3040x12/1
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          HUVEMA CRDM 3040x12/1
          Radial Drilling Machine

          neu

          bore capacity in steel (diameter) 40 mm
          arm length 1250 mm
          workpiece height max. 1250 mm
          HUVEMA - CRDM 3040x12/1
          Radial Drilling Machine
          Request / Contact
          used Machines available immediately Radial Drilling Machine HUVEMA CRDM 3050x16/1
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          HUVEMA CRDM 3050x16/1
          Radial Drilling Machine

          neu

          bore capacity in steel (diameter) 50 mm
          arm length 1600 mm
          workpiece height max. 1100 mm
          HUVEMA - CRDM 3050x16/1
          Radial Drilling Machine
          Request / Contact
          used Machines available immediately Radial Drilling Machine HUVEMA CRDM 3050x1600 Topline
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          HUVEMA CRDM 3050x1600 Topline
          Radial Drilling Machine

          neu

          bore capacity in steel (diameter) 50 mm
          arm length 1600 mm
          workpiece height max. 1100 mm
          HUVEMA - CRDM 3050x1600 Topline
          Radial Drilling Machine
          Request / Contact
          used Machines available immediately Key-Way Milling Machine - Horizontal HURTH LF 32 a
          Kemmerich Werkzeugmaschinen GmbH  Monheim am Rhein Im Rottfeld 1a Deutschland

          Kemmerich Werkzeugmaschinen
          HURTH LF 32 a
          Key-Way Milling Machine - Horizontal

          1985

          groove width 16 mm
          x-travel 16-200 mm
          table length 1500 mm
          HURTH - LF 32 a
          Key-Way Milling Machine - Horizontal
          Request / Contact
          used Machines available immediately Key-Way Milling Machine - Horizontal HURTH LF 32a
          MW-Machines   Hofkirchen Dorf 9 Österreich

          MW-MACHINES
          HURTH LF 32a
          Key-Way Milling Machine - Horizontal

          groove width / mm
          x-travel / mm
          table length / mm
          HURTH - LF 32a
          Key-Way Milling Machine - Horizontal
          Request / Contact
          used Machines available immediately Knee-and-Column Milling Machine - univ. HUVEMA HU 4 VK
          Feyen Maschinen GmbH   Krefeld Gelleperstr. 10 Deutschland

          Feyen Maschinen GmbH
          HUVEMA HU 4 VK
          Knee-and-Column Milling Machine - univ.

          neu

          x-travel 800 mm
          y-travel 420 mm
          z-travel 420 mm
          HUVEMA - HU 4 VK
          Knee-and-Column Milling Machine - univ.
          Request / Contact
          used Machines available immediately Spline Shaft Milling Machine HURTH LKF 33
          Emuk Maschinenhandel GmbH   Malsch Siemensstrasse 24 Deutschland

          Emuk Maschinenhandel GmbH
          HURTH LKF 33
          Spline Shaft Milling Machine

          max. workpiece diameter 300 mm
          hobbing length 1000 mm
          clamping length 2400 mm
          HURTH - LKF 33
          Spline Shaft Milling Machine
          Request / Contact
          used Machines available immediately Chamfering and Deburring Machine HURTH ZK 200/1-TE CNC
          Hans - Jürgen Geiger Maschinen-Vertrieb GmbH  Metzingen James-Watt-Str. 12 Deutschland

          HANS - JÜRGEN GEIGER
          HURTH ZK 200/1-TE CNC
          Chamfering and Deburring Machine

          1991

          max. wheel diameter 0 mm
          max. number of teeth 0
          max. module
          HURTH - ZK 200/1-TE CNC
          Chamfering and Deburring Machine
          Request / Contact
          used Machines available immediately Chamfering and Deburring Machine HURTH ZK 7
          Hans - Jürgen Geiger Maschinen-Vertrieb GmbH  Metzingen James-Watt-Str. 12 Deutschland

          HANS - JÜRGEN GEIGER
          HURTH ZK 7
          Chamfering and Deburring Machine

          1975

          max. wheel diameter 280 mm
          max. number of teeth 100
          max. module 6
          HURTH - ZK 7
          Chamfering and Deburring Machine
          Request / Contact
          used Machines available immediately Gear Chamfering Machine HURTH ZK 5
          MW-Machines   Hofkirchen Dorf 9 Österreich

          MW-MACHINES
          HURTH ZK 5
          Gear Chamfering Machine

          max. wheel diameter 300 mm
          spindle turning speed range 250 - 2800 U/min
          Pitch min/max 45/125 mm
          HURTH - ZK 5
          Gear Chamfering Machine
          Request / Contact
          used Machines available immediately Gear Hobbing and Shaping Mach. -combined HURTH WF10
          Christoph Busch GmbH   Korschenbroich Dieselstr. 22 Deutschland

          Christoph Busch GmbH
          HURTH WF10
          Gear Hobbing and Shaping Mach. -combined

          1989

          19147
          weight of the machine ca. 4 t
          working width max. 300 mm
          HURTH - WF10
          Gear Hobbing and Shaping Mach. -combined
          Request / Contact
          used Machines available immediately Gear Hobbing and Shaping Mach. -combined HURTH WF10
          Christoph Busch GmbH   Korschenbroich Dieselstr. 22 Deutschland

          Christoph Busch GmbH
          HURTH WF10
          Gear Hobbing and Shaping Mach. -combined

          1988

          weight of the machine ca. 5 t
          working width max. 300 mm
          6
          HURTH - WF10
          Gear Hobbing and Shaping Mach. -combined
          Request / Contact
          used Machines available immediately Gear Hobbing Machine - Vertical HURTH WF 450
          Emuk Maschinenhandel GmbH   Malsch Siemensstrasse 24 Deutschland

          Emuk Maschinenhandel GmbH
          HURTH WF 450
          Gear Hobbing Machine - Vertical

          1983

          max. wheel diameter 450 mm
          gear width 300 mm
          max. module 10
          HURTH - WF 450
          Gear Hobbing Machine - Vertical
          Request / Contact
          used Machines available immediately Gear Noise under Load Testing Machine HURTH ZP 300
          Zuefle GmbH   Giebelstadt Levi-Strauss-Str. 121 Deutschland

          Zuefle GmbH
          HURTH ZP 300
          Gear Noise under Load Testing Machine

          2000

          max. wheel diameter 300 mm
          centre distance 500 mm
          max. module 6 mm
          HURTH - ZP 300 6.200 €
          Gear Noise under Load Testing Machine
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   

          TOP Manufacturer: