,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Machines available immediately

          Machinelist: Machines available immediately


          Bevel Gear Generator - Straight

          used Machines available immediately Bevel Gear Generator - Straight MODUL ZFTK 500/2


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19248 · Bevel Gear Generator - Straight

          MODUL - ZFTK 500/2 - - 1988 -

          Technical details
          max. wheel diameter 620 mm︱gear width 90 mm︱max. module 12 ︱min. module - ︱no. of teeth 6 - 100 ︱pivoting angle 0 - 90 Grad︱spindle taper metr. 100 ︱milling head speed 28 - 56 U/min︱connected load 18 kVA︱total power requirement 14 kW︱weight of the machine ca. 12 t︱
          change gears coolant Chip Conveyor
            max. wheel diameter 620 mm
            gear width 90 mm
            max. module 12
            min. module -
            no. of teeth 6 - 100
            pivoting angle 0 - 90 Grad
            spindle taper metr. 100
            milling head speed 28 - 56 U/min
            connected load 18 kVA
            total power requirement 14 kW
            weight of the machine ca. 12 t
            Description :
            change gears
            coolant
            Chip Conveyor


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact

          Welding Machine - Longitudinal

          used Machines available immediately Welding Machine - Longitudinal KLOPFER


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-27181c · Welding Machine - Longitudinal

          KLOPFER - - - -

          Technical details
          workpiece length mm︱current capacity kVA︱welding speed m/min︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          Outside Ø: 310 mm
          Bore: 105 mm
          Construction height without jaws: 110 mm
          Bbmjpvaa
          Jaw height: 45 mm
          Reversible jaws
            Description :
            Outside Ø: 310 mm

            Bore: 105 mm

            Construction height without jaws: 110 mm

            Bbmjpvaa

            Jaw height: 45 mm

            Reversible jaws


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Welding Machine - Longitudinal KLOPFER


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-ZD005 · Welding Machine - Longitudinal

          KLOPFER - - - -

          Technical details
          workpiece length mm︱current capacity kVA︱welding speed m/min︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          External diameter: 500 mm
          Bore: 95 mm
          S0vxtx
          Flange width: 103 mm
          Recording, short taper: Gr. 6
            Description :
            External diameter: 500 mm

            Bore: 95 mm

            S0vxtx

            Flange width: 103 mm

            Recording, short taper: Gr. 6


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact

          Other

          used Machines available immediately Other DEMAG A15/9


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05388 · Other

          DEMAG - A15/9 - - 1980 -

          Technical details
          .2 Stück im Paket ︱lifting capacity Magnet 1: 15 t ︱lifting capacity Magnet 2: 9 t ︱width ca. 1.200 mm︱length ca. 650 mm︱
            .
            2 Stück im Paket
            lifting capacity Magnet 1: 15 t
            lifting capacity Magnet 2: 9 t
            width ca. 1.200 mm
            length ca. 650 mm


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact

          Chuck

          used Machines available immediately Chuck KLOPFER


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-250117 · Chuck

          KLOPFER - - - -

          Technical details
          diameter mm︱boring diameter mm︱- 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          Feed external diameter: 250 mm
          Bore: 75 mm
          Height of the Chuck body: 83 mm

          including stepped to the outside jaws, Chuck key,.
          JAWS stepped inside are missing!
          3xama30ge
            Description :
            Feed external diameter: 250 mm

            Bore: 75 mm

            Height of the Chuck body: 83 mm



            including stepped to the outside jaws, Chuck key,.

            JAWS stepped inside are missing!

            3xama30ge


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact

          Magnetic Clamping Plate

          used Machines available immediately Magnetic Clamping Plate DEMAG A2,5


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-04539 · Magnetic Clamping Plate

          DEMAG - A2,5 - - 1990 -

          Technical details
          Lifting capacity 2,5 t︱weight of the machine ca. 80 kg︱
            Lifting capacity 2,5 t
            weight of the machine ca. 80 kg


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact

          Motor

          used Machines available immediately Motor DEMAG KBV 71 A 8/2 - Getriebemotor


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-C1188 · Motor

          DEMAG - KBV 71 A 8/2 - Getriebemotor - - unbekannt -

          Technical details
          power capacity / kW︱volt / V︱ampere / A︱
            power capacity / kW
            volt / V
            ampere / A


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Motor DEMAG S040-B5-11-2


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-C1187 · Motor

          DEMAG - S040-B5-11-2 - - unbekannt -

          Technical details
          power capacity / kW︱volt / V︱ampere / A︱
            power capacity / kW
            volt / V
            ampere / A


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Motor DEMAG S040-B5-11-2


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-C1191 · Motor

          DEMAG - S040-B5-11-2 - - unbekannt -

          Technical details
          power capacity / kW︱volt / V︱ampere / A︱
            power capacity / kW
            volt / V
            ampere / A


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact

          Spare Parts

          used Machines available immediately Spare Parts Demag


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-M113 · Spare Parts

          Demag - - - -

          Technical details
          -
          Traveller Capacity: 5 T Electrically driven
            -
            Description :
            Traveller
            Capacity: 5 T
            Electrically driven



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact

          Injection molding machine up to 1000 KN

          used Machines available immediately Injection molding machine up to 1000 KN DEMAG  IntElect 100/ 420-350


          • A-Z Maschinenhandel GmbH
          • Daimlerstr. 24
          • 73037 Göppingen
          • Deutschland

          • +49 (0) 7161 9873363
            +49 (0) 7161 9873364
          • info@a-z-maschinenhandel.de
            www.a-z-maschinenhandel.de
          #1128-3013 · Injection molding machine up to 1000 KN

          DEMAG - IntElect 100/ 420-350 - - 2006 -

          Technical details
          screw size unbkt mm︱injection shot weight in Polysterol unbkt g/PS︱closing pressure 100 kN︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            screw size unbkt mm
            injection shot weight in Polyste. unbkt g/PS
            closing pressure 100 kN


        • A-Z Maschinenhandel GmbH
        • Daimlerstr. 24
        • 73037 Göppingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Injection molding machine up to 1000 KN DEMAG ERGOtech 80-200 system


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4051744 · Injection molding machine up to 1000 KN

          DEMAG - ERGOtech 80-200 system - - 2000 -

          Technical details
          closing pressure 800 kN︱lockforce 800 kN︱opening stroke 450 mm︱mould space min. 250 mm︱ 700 mm︱ 580x590 mm︱ 400x400 mm︱weight of tools max. 510 kg︱ejector path 150 mm︱capacity of ejector 41,2 kN︱ 14,8 kN︱
            closing pressure 800 kN
            lockforce 800 kN
            opening stroke 450 mm
            mould space min. 250 mm
            700 mm
            580x590 mm
            400x400 mm
            weight of tools max. 510 kg
            ejector path 150 mm
            capacity of ejector 41,2 kN
            14,8 kN


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact

          Injection molding machine up to 5000 KN

          used Machines available immediately Injection molding machine up to 5000 KN DEMAG Ergotech 150 520-600


          • A-Z Maschinenhandel GmbH
          • Daimlerstr. 24
          • 73037 Göppingen
          • Deutschland

          • +49 (0) 7161 9873363
            +49 (0) 7161 9873364
          • info@a-z-maschinenhandel.de
            www.a-z-maschinenhandel.de
          #1128-3014 · Injection molding machine up to 5000 KN

          DEMAG - Ergotech 150 520-600 - - 2007 -

          Technical details
          screw size unbkt. mm︱injection shot weight in Polysterol unbkt. g/PS︱closing pressure 150 kN︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            screw size unbkt. mm
            injection shot weight in Polyste. unbkt. g/PS
            closing pressure 150 kN


        • A-Z Maschinenhandel GmbH
        • Daimlerstr. 24
        • 73037 Göppingen
        • Deutschland

        • Datasheet
          Request / Contact

          Injection-moulding machines (plastic)

          used Machines available immediately Injection-moulding machines (plastic) DEMAG multi 420-810


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230506 · Injection-moulding machines (plastic)

          DEMAG - multi 420-810 - - 2008 -

          Technical details
          clamping force 4200 kN︱injection volume 1212 /292 cm³︱screw diameter 70 /15 mm︱platen size 1200 x 1100 mm︱
          Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG Multi 420/810-2300h/430 incl. handling injection unit 1: - Screw diameter: 70 mm - injection volume: 1.112 cm³ - weight: 880 g injection unit 2: - Screw diameter: 15 mm - injection volume: 292 cm³ - weight: 190 g Clamping unit: - Clamping force: 1200 kN - Centring: 160 mm - Platen size: 1200 x 1100 mm - Mould size: 810 x 710 mm - Mould thickness min.: 380 mm - Mould thickness max.: 940 mm - 4 & 4 Cascades - 4x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 192 kW - Dimensions L/W/H: approx. 7,900 x 2,200 x 5,000 mm - Weight approx.: 25,000 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
            clamping force 4200 kN
            injection volume 1212 /292 cm³
            screw diameter 70 /15 mm
            platen size 1200 x 1100 mm
            Description :
            Condition: used,

            Specification: Horizontal 2K-injection moulding machine,
            DEMAG Multi 420/810-2300h/430
            incl. handling

            injection unit 1:
            - Screw diameter: 70 mm
            - injection volume: 1.112 cm³
            - weight: 880 g

            injection unit 2:
            - Screw diameter: 15 mm
            - injection volume: 292 cm³
            - weight: 190 g

            Clamping unit:
            - Clamping force: 1200 kN
            - Centring: 160 mm
            - Platen size: 1200 x 1100 mm
            - Mould size: 810 x 710 mm
            - Mould thickness min.: 380 mm
            - Mould thickness max.: 940 mm

            - 4 & 4 Cascades
            - 4x core pull
            - Handling: Yes

            - Voltage: 3x 400V, 50Hz, N, PE
            - Total power: 192 kW
            - Dimensions L/W/H: approx. 7,900 x 2,200 x 5,000 mm
            - Weight approx.: 25,000 kg

            Further DEMAG plastic injection moulding machines and a
            conveyor control/material station for 4 to 56
            separators for granulate conveying on our homepage.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Injection-moulding machines (plastic) DEMAG ergotech System 60/420-200


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230202 · Injection-moulding machines (plastic)

          DEMAG - ergotech System 60/420-200 - - 2007 -

          Technical details
          clamping force 600 kN︱injection volume 106 cm³︱screw diameter 30 mm︱platen size 590 x 600 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump capacity: 22 kW - Voltage: 3x 400V, 50 Hz - total power: 30,3 kW - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm - Weight without oil approx.: 3,950 kg - 2x core pull Plant is still in production and will be available from approx. available.
            clamping force 600 kN
            injection volume 106 cm³
            screw diameter 30 mm
            platen size 590 x 600 mm
            Description :
            Condition: used,

            Specification: Horizontal injection moulding machine,
            type: System 60/420-200

            - Internat. Size specification: 600 - 200

            injection unit:
            - Screw diameter: 30 mm
            - L/D - ratio: 20D
            - Injection volume: 106 cm³
            - Injection pressure: 1995 bar
            - Cylinder heating: 8,3 kW

            clamping unit:
            - Clamping force: 600 kN
            - Max. opening stroke: 450 mm
            - Mould installation height: min. 250 mm
            - Max. platen distance: 700 mm
            - Mould clamping platens: 590 x 600 mm
            - Clear column distance: 420 x 420 mm

            Total machine:
            - Oil tank filling: 180 ltr.
            - Pump capacity: 22 kW
            - Voltage: 3x 400V, 50 Hz
            - total power: 30,3 kW
            - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm
            - Weight without oil approx.: 3,950 kg

            - 2x core pull

            Plant is still in production and will be available from approx.
            available.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Injection-moulding machines (plastic) DEMAG ergotech-multi 80-420


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230503 · Injection-moulding machines (plastic)

          DEMAG - ergotech-multi 80-420 - - 2003 -

          Technical details
          clamping force 800 kN︱injection volume 106 / 42 cm³︱screw diameter 30 / 22 mm︱platen size 600 x 600 mm︱
          Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 30 mm - injection volume: 106 cm³ - weight: 94 g injection unit 2: - Screw diameter: 22 mm - injection volume: 42 cm³ - weight: 37 g Clamping unit: - Clamping force: 800 kN - Centring: 125 mm - Platen size: 600 x 600 mm - Mould size: 420 x 420 mm - Mould thickness min.: 250 mm - Mould thickness max.: 590 mm - Voltage: 3x 400V, 50Hz, N, PE - Total power: 42 kW - Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm - Weight approx.: 5,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
            clamping force 800 kN
            injection volume 106 / 42 cm³
            screw diameter 30 / 22 mm
            platen size 600 x 600 mm
            Description :
            Condition: used,

            Specification: Horizontal 2K-injection moulding machine,

            injection unit 1:
            - Screw diameter: 30 mm
            - injection volume: 106 cm³
            - weight: 94 g

            injection unit 2:
            - Screw diameter: 22 mm
            - injection volume: 42 cm³
            - weight: 37 g

            Clamping unit:
            - Clamping force: 800 kN
            - Centring: 125 mm
            - Platen size: 600 x 600 mm
            - Mould size: 420 x 420 mm
            - Mould thickness min.: 250 mm
            - Mould thickness max.: 590 mm

            - Voltage: 3x 400V, 50Hz, N, PE
            - Total power: 42 kW
            - Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm
            - Weight approx.: 5,750 kg

            Further DEMAG plastic injection moulding machines and a
            conveyor control/material station for 4 to 56
            separators for granulate conveying on our homepage.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Injection-moulding machines (plastic) DEMAG ergotech pro 100-400 viva


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230504 · Injection-moulding machines (plastic)

          DEMAG - ergotech pro 100-400 viva - - 2001 -

          Technical details
          clamping force 1.000 kN︱injection volume 203 cm³︱screw diameter 40 mm︱platen size 580 x 652 mm︱
          Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 40 mm - injection volume: 230 cm³ - weight: 205 g Clamping unit: - Clamping force: 1000 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 400 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - 1x core pull - Voltage: 3x 400V, 50Hz, N, PE - Total power: 25 kW - Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
            clamping force 1.000 kN
            injection volume 203 cm³
            screw diameter 40 mm
            platen size 580 x 652 mm
            Description :
            Condition: used,

            Specification: Horizontal 2K-injection moulding machine,

            injection unit 1:
            - Screw diameter: 40 mm
            - injection volume: 230 cm³
            - weight: 205 g

            Clamping unit:
            - Clamping force: 1000 kN
            - Centring: 125 mm
            - Platen size: 580 x 652 mm
            - Mould size: 400 x 400 mm
            - Mould thickness min.: 250 mm
            - Mould thickness max.: 450 mm

            - 1x core pull

            - Voltage: 3x 400V, 50Hz, N, PE
            - Total power: 25 kW
            - Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm
            - Weight approx.: 4,750 kg

            Further DEMAG plastic injection moulding machines and a
            conveyor control/material station for 4 to 56
            separators for granulate conveying on our homepage.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Injection-moulding machines (plastic) DEMAG ergotech viva 80-400


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230201 · Injection-moulding machines (plastic)

          DEMAG - ergotech viva 80-400 - - 2001 -

          Technical details
          clamping force 800 kN︱injection volume 177 cm³︱screw diameter 35 mm︱platen size 580 x 580 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, type: Ergotech viva 80-400 - Internat. Size specification: 800 - 400 injection unit: - Screw diameter: 35 mm - L/D - ratio: 20D - Injection volume: 177 cm³ - Injection pressure: 2387 bar - Cylinder heating: 8,8 kW clamping unit: - Clamping force: 800 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 580 x 580 mm - Clear column distance: 400 x 400 mm Total machine: - Oil tank filling: 220 ltr. - Pump capacity: 15 kW - Voltage: 3x 400V, 50 Hz, N, PE - total power: 23,8 kW - Dimensions L/W/H: approx. 4250 x 1270 x 1795 mm - Weight without oil approx.: 3,600 kg - 1x core pull Plant is still in production and will be available from approx. available.
            clamping force 800 kN
            injection volume 177 cm³
            screw diameter 35 mm
            platen size 580 x 580 mm
            Description :
            Condition: used,

            Specification: Horizontal injection moulding machine,
            type: Ergotech viva 80-400

            - Internat. Size specification: 800 - 400

            injection unit:
            - Screw diameter: 35 mm
            - L/D - ratio: 20D
            - Injection volume: 177 cm³
            - Injection pressure: 2387 bar
            - Cylinder heating: 8,8 kW

            clamping unit:
            - Clamping force: 800 kN
            - Max. opening stroke: 450 mm
            - Mould installation height: min. 250 mm
            - Max. platen distance: 700 mm
            - Mould clamping platens: 580 x 580 mm
            - Clear column distance: 400 x 400 mm

            Total machine:
            - Oil tank filling: 220 ltr.
            - Pump capacity: 15 kW
            - Voltage: 3x 400V, 50 Hz, N, PE
            - total power: 23,8 kW
            - Dimensions L/W/H: approx. 4250 x 1270 x 1795 mm
            - Weight without oil approx.: 3,600 kg

            - 1x core pull

            Plant is still in production and will be available from approx.
            available.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Injection-moulding machines (plastic) DEMAG ergotech 150/475-440


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L201202 · Injection-moulding machines (plastic)

          DEMAG - ergotech 150/475-440 - - 1999 -

          Technical details
          clamping force -- kN︱injection volume 230 cm³︱screw diameter 40 mm︱platen size 475 x 475 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller
            clamping force -- kN
            injection volume 230 cm³
            screw diameter 40 mm
            platen size 475 x 475 mm
            Description :
            Condition: used,

            Specification: Horizontal
            injection moulding machine,

            injection unit:
            - Screw diameter: 40 mm
            - Cylinder diameter: 40 mm
            - Spraying volume: 230 cm³.

            Clamping unit:
            - tie bar distance: 475 x 475 mm
            - Operating hours approx.: 30000 h

            - Air valve
            - Core pull
            - 12-way hot runner controller




        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Injection-moulding machines (plastic) DEMAG ergotech 650-5200-610


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230507 · Injection-moulding machines (plastic)

          DEMAG - ergotech 650-5200-610 - - 1999 -

          Technical details
          clamping force 6500 kN︱injection volume 2011 / 323 cm³︱screw diameter 80 / 45 mm︱platen size 1450 x 1350 mm︱
          Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1: - Screw diameter: 80 mm - injection volume: 2.011 cm³ - weight: 1810 g injection unit 2: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 6500 kN - Centring: 200 mm - Platen size: 1450 x 1350 mm - Mould size: 1000 x 910 mm - Mould thickness min.: 450 mm - Mould thickness max.: 950 mm - 2x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 245 kW - Dimensions L/W/H: approx. 10,100 x 5,500 x 5,000 mm - Weight approx.: 36,000 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
            clamping force 6500 kN
            injection volume 2011 / 323 cm³
            screw diameter 80 / 45 mm
            platen size 1450 x 1350 mm
            Description :
            Condition: used,

            Specification: Horizontal 2K-injection moulding machine,
            DEMAG ergotech 650-5200-610
            incl. handling

            injection unit 1:
            - Screw diameter: 80 mm
            - injection volume: 2.011 cm³
            - weight: 1810 g

            injection unit 2:
            - Screw diameter: 45 mm
            - injection volume: 323 cm³
            - weight: 290 g

            Clamping unit:
            - Clamping force: 6500 kN
            - Centring: 200 mm
            - Platen size: 1450 x 1350 mm
            - Mould size: 1000 x 910 mm
            - Mould thickness min.: 450 mm
            - Mould thickness max.: 950 mm

            - 2x core pull
            - Handling: Yes

            - Voltage: 3x 400V, 50Hz, N, PE
            - Total power: 245 kW
            - Dimensions L/W/H: approx. 10,100 x 5,500 x 5,000 mm
            - Weight approx.: 36,000 kg

            Further DEMAG plastic injection moulding machines and a
            conveyor control/material station for 4 to 56
            separators for granulate conveying on our homepage.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Injection-moulding machines (plastic) DEMAG ergotech pro 150-610


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230505 · Injection-moulding machines (plastic)

          DEMAG - ergotech pro 150-610 - - 1998 -

          Technical details
          clamping force 1500 kN︱injection volume 323 cm³︱screw diameter 45 mm︱platen size 690 x 660 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 1,500 kN - Centring: 125 mm - Platen size: 690 x 660 mm - Mould size: 475 x 475 mm - Mould thickness min.: 230 mm - Mould thickness max.: 460 mm - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE, 63A - Heating: 22 A - Motors: 41 A - Total power: 27 kW - Dimensions L/W/H: approx. 6,500 x 1,600 x 2,500 mm - Weight approx.: 9,000 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
            clamping force 1500 kN
            injection volume 323 cm³
            screw diameter 45 mm
            platen size 690 x 660 mm
            Description :
            Condition: used,

            Specification: Horizontal injection moulding machine,

            injection unit:
            - Screw diameter: 45 mm
            - injection volume: 323 cm³
            - weight: 290 g

            Clamping unit:
            - Clamping force: 1,500 kN
            - Centring: 125 mm
            - Platen size: 690 x 660 mm
            - Mould size: 475 x 475 mm
            - Mould thickness min.: 230 mm
            - Mould thickness max.: 460 mm

            - Handling: Yes

            - Voltage: 3x 400V, 50Hz, N, PE, 63A
            - Heating: 22 A
            - Motors: 41 A
            - Total power: 27 kW
            - Dimensions L/W/H: approx. 6,500 x 1,600 x 2,500 mm
            - Weight approx.: 9,000 kg

            Further DEMAG plastic injection moulding machines and a
            conveyor control/material station for 4 to 56
            separators for granulate conveying on our homepage.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Injection-moulding machines (plastic) DEMAG ergotech pro 250-80


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230501 · Injection-moulding machines (plastic)

          DEMAG - ergotech pro 250-80 - - 1998 -

          Technical details
          clamping force 250 kN︱injection volume 42 cm³︱screw diameter 22 mm︱platen size 420 x 455 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 22 mm - injection volume: 42 cm³ - weight: 37 g Clamping unit: - Clamping force: 250 kN - Centring: 110 mm - Platen size: 420 x 455 mm - Mould size: 280 x 280 mm - Mould thickness min.: 160 mm - Mould thickness max.: 475 mm - Ejector/picker: Yes - Voltage: 3x 400V, 50Hz, N, PE, 36A - Total power: 16 kW - Dimensions L/W/H: approx. 3,100 x 1,050 x 1,670 mm - Weight approx.: 2,000 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
            clamping force 250 kN
            injection volume 42 cm³
            screw diameter 22 mm
            platen size 420 x 455 mm
            Description :
            Condition: used,

            Specification: Horizontal injection moulding machine,

            injection unit:
            - Screw diameter: 22 mm
            - injection volume: 42 cm³
            - weight: 37 g

            Clamping unit:
            - Clamping force: 250 kN
            - Centring: 110 mm
            - Platen size: 420 x 455 mm
            - Mould size: 280 x 280 mm
            - Mould thickness min.: 160 mm
            - Mould thickness max.: 475 mm

            - Ejector/picker: Yes

            - Voltage: 3x 400V, 50Hz, N, PE, 36A
            - Total power: 16 kW
            - Dimensions L/W/H: approx. 3,100 x 1,050 x 1,670 mm
            - Weight approx.: 2,000 kg

            Further DEMAG plastic injection moulding machines and a
            conveyor control/material station for 4 to 56
            separators for granulate conveying on our homepage.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Machines available immediately Injection-moulding machines (plastic) DEMAG ergotech pro 80-400


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L230502 · Injection-moulding machines (plastic)

          DEMAG - ergotech pro 80-400 - - 1998 -

          Technical details
          clamping force 800 kN︱injection volume 231 cm³︱screw diameter 40 mm︱platen size 580 x 652 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - injection volume: 231 cm³ - weight: 205 g Clamping unit: - Clamping force: 800 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 450 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - Ejector/picker: Yes - Voltage: 3x 400V, 50Hz, N, PE, 70A - Total power: 28 kW - Dimensions L/W/H: approx. 3,300 x 1,400 x 1,800 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
            clamping force 800 kN
            injection volume 231 cm³
            screw diameter 40 mm
            platen size 580 x 652 mm
            Description :
            Condition: used,

            Specification: Horizontal injection moulding machine,

            injection unit:
            - Screw diameter: 40 mm
            - injection volume: 231 cm³
            - weight: 205 g

            Clamping unit:
            - Clamping force: 800 kN
            - Centring: 125 mm
            - Platen size: 580 x 652 mm
            - Mould size: 400 x 450 mm
            - Mould thickness min.: 250 mm
            - Mould thickness max.: 450 mm

            - Ejector/picker: Yes

            - Voltage: 3x 400V, 50Hz, N, PE, 70A
            - Total power: 28 kW
            - Dimensions L/W/H: approx. 3,300 x 1,400 x 1,800 mm
            - Weight approx.: 4,750 kg

            Further DEMAG plastic injection moulding machines and a
            conveyor control/material station for 4 to 56
            separators for granulate conveying on our homepage.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact

          Bridge Crane - Single Beam

          used Machines available immediately Bridge Crane - Single Beam Demag


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03552 · Bridge Crane - Single Beam

          Demag - - - 1994 -

          Technical details
          weight max. 10 t︱stroke 9000 mm︱clamping width 18000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Overhead traveling crane number: 94283910About usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us.
            weight max. 10 t
            stroke 9000 mm
            clamping width 18000 mm
            Description :
            Overhead traveling crane number: 94283910About usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

          TOP Manufacturer: