Machines available immediately
Machinelist: Machines available immediately
Crank Press - Double Column
- VÖGTLE SERVICE GMBH
- Friedhofstr. 115
- 73054 Eislingen
- Deutschland
-
+49 71 61 99 73- 0
+49 71 61 99 73- 13 -
Thomas.Ruckh@voegtle.de
www.voegtle.de
#1050-163020 · Crank Press - Double Column
BRET - 2 PACK 25 B - - 1994 - Siemens S 5
Technical details
permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, clutch/brake combination (Ortlinghaus), tool changing system, electronic roll feed (Normatic, AESL 500-2,8) distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
Other
- Christoph Busch GmbH
- Dieselstr. 22
- 41352 Korschenbroich
- Deutschland
-
+49 (0) 2182 570 5930
+49 (0) 2182 5785202 -
mail@busch-gruppe.de
www.busch-gruppe.de
#2052-05388 · Other
DEMAG - A15/9 - - 1980 -
Technical details
Magnetic Clamping Plate
- Christoph Busch GmbH
- Dieselstr. 22
- 41352 Korschenbroich
- Deutschland
-
+49 (0) 2182 570 5930
+49 (0) 2182 5785202 -
mail@busch-gruppe.de
www.busch-gruppe.de
#2052-04539 · Magnetic Clamping Plate
DEMAG - A2,5 - - 1990 -
Technical details
Motor
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-C1188 · Motor
DEMAG - KBV 71 A 8/2 - Getriebemotor - - unbekannt -
Technical details
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-C1187 · Motor
DEMAG - S040-B5-11-2 - - unbekannt -
Technical details
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-C1191 · Motor
DEMAG - S040-B5-11-2 - - unbekannt -
Technical details
Datasheet
Request / Contact
Spare Parts
- Jansen Machinehandel BV
- Bredaseweg 210
- 4873 LA Etten-leur
- Nederland
-
+31 (0) 76 5015750
-
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl
#2049-M113 · Spare Parts
Demag - - - -
Technical details
Traveller Capacity: 5 T Electrically driven
Injection molding machine up to 1000 KN
- A-Z Maschinenhandel GmbH
- Daimlerstr. 24
- 73037 Göppingen
- Deutschland
-
+49 (0) 7161 9873363
+49 (0) 7161 9873364 -
info@a-z-maschinenhandel.de
www.a-z-maschinenhandel.de
#1128-3013 · Injection molding machine up to 1000 KN
DEMAG - IntElect 100/ 420-350 - - 2006 -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-4051744 · Injection molding machine up to 1000 KN
DEMAG - ERGOtech 80-200 system - - 2000 -
Technical details
Injection molding machine up to 5000 KN
- A-Z Maschinenhandel GmbH
- Daimlerstr. 24
- 73037 Göppingen
- Deutschland
-
+49 (0) 7161 9873363
+49 (0) 7161 9873364 -
info@a-z-maschinenhandel.de
www.a-z-maschinenhandel.de
#1128-3014 · Injection molding machine up to 5000 KN
DEMAG - Ergotech 150 520-600 - - 2007 -
Technical details
Injection-moulding machines (plastic)
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-L230506 · Injection-moulding machines (plastic)
DEMAG - multi 420-810 - - 2008 -
Technical details
Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG Multi 420/810-2300h/430 incl. handling injection unit 1: - Screw diameter: 70 mm - injection volume: 1.112 cm³ - weight: 880 g injection unit 2: - Screw diameter: 15 mm - injection volume: 292 cm³ - weight: 190 g Clamping unit: - Clamping force: 1200 kN - Centring: 160 mm - Platen size: 1200 x 1100 mm - Mould size: 810 x 710 mm - Mould thickness min.: 380 mm - Mould thickness max.: 940 mm - 4 & 4 Cascades - 4x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 192 kW - Dimensions L/W/H: approx. 7,900 x 2,200 x 5,000 mm - Weight approx.: 25,000 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-L230202 · Injection-moulding machines (plastic)
DEMAG - ergotech System 60/420-200 - - 2007 -
Technical details
Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump capacity: 22 kW - Voltage: 3x 400V, 50 Hz - total power: 30,3 kW - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm - Weight without oil approx.: 3,950 kg - 2x core pull Plant is still in production and will be available from approx. available.
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-L230503 · Injection-moulding machines (plastic)
DEMAG - ergotech-multi 80-420 - - 2003 -
Technical details
Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 30 mm - injection volume: 106 cm³ - weight: 94 g injection unit 2: - Screw diameter: 22 mm - injection volume: 42 cm³ - weight: 37 g Clamping unit: - Clamping force: 800 kN - Centring: 125 mm - Platen size: 600 x 600 mm - Mould size: 420 x 420 mm - Mould thickness min.: 250 mm - Mould thickness max.: 590 mm - Voltage: 3x 400V, 50Hz, N, PE - Total power: 42 kW - Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm - Weight approx.: 5,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-L230504 · Injection-moulding machines (plastic)
DEMAG - ergotech pro 100-400 viva - - 2001 -
Technical details
Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 40 mm - injection volume: 230 cm³ - weight: 205 g Clamping unit: - Clamping force: 1000 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 400 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - 1x core pull - Voltage: 3x 400V, 50Hz, N, PE - Total power: 25 kW - Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-L230201 · Injection-moulding machines (plastic)
DEMAG - ergotech viva 80-400 - - 2001 -
Technical details
Condition: used, Specification: Horizontal injection moulding machine, type: Ergotech viva 80-400 - Internat. Size specification: 800 - 400 injection unit: - Screw diameter: 35 mm - L/D - ratio: 20D - Injection volume: 177 cm³ - Injection pressure: 2387 bar - Cylinder heating: 8,8 kW clamping unit: - Clamping force: 800 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 580 x 580 mm - Clear column distance: 400 x 400 mm Total machine: - Oil tank filling: 220 ltr. - Pump capacity: 15 kW - Voltage: 3x 400V, 50 Hz, N, PE - total power: 23,8 kW - Dimensions L/W/H: approx. 4250 x 1270 x 1795 mm - Weight without oil approx.: 3,600 kg - 1x core pull Plant is still in production and will be available from approx. available.
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-L201202 · Injection-moulding machines (plastic)
DEMAG - ergotech 150/475-440 - - 1999 -
Technical details
Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-L230507 · Injection-moulding machines (plastic)
DEMAG - ergotech 650-5200-610 - - 1999 -
Technical details
Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1: - Screw diameter: 80 mm - injection volume: 2.011 cm³ - weight: 1810 g injection unit 2: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 6500 kN - Centring: 200 mm - Platen size: 1450 x 1350 mm - Mould size: 1000 x 910 mm - Mould thickness min.: 450 mm - Mould thickness max.: 950 mm - 2x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 245 kW - Dimensions L/W/H: approx. 10,100 x 5,500 x 5,000 mm - Weight approx.: 36,000 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-L230505 · Injection-moulding machines (plastic)
DEMAG - ergotech pro 150-610 - - 1998 -
Technical details
Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 1,500 kN - Centring: 125 mm - Platen size: 690 x 660 mm - Mould size: 475 x 475 mm - Mould thickness min.: 230 mm - Mould thickness max.: 460 mm - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE, 63A - Heating: 22 A - Motors: 41 A - Total power: 27 kW - Dimensions L/W/H: approx. 6,500 x 1,600 x 2,500 mm - Weight approx.: 9,000 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-L230501 · Injection-moulding machines (plastic)
DEMAG - ergotech pro 250-80 - - 1998 -
Technical details
Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 22 mm - injection volume: 42 cm³ - weight: 37 g Clamping unit: - Clamping force: 250 kN - Centring: 110 mm - Platen size: 420 x 455 mm - Mould size: 280 x 280 mm - Mould thickness min.: 160 mm - Mould thickness max.: 475 mm - Ejector/picker: Yes - Voltage: 3x 400V, 50Hz, N, PE, 36A - Total power: 16 kW - Dimensions L/W/H: approx. 3,100 x 1,050 x 1,670 mm - Weight approx.: 2,000 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
- MEB Maschinenhandel GmbH
- Schwalbenweg 4
- 30826 Garbsen
- Deutschland
-
(0)5031 9394-634
-
info@meb-maschinenhandel.de
www.meb-maschinenhandel.de
#2037-L230502 · Injection-moulding machines (plastic)
DEMAG - ergotech pro 80-400 - - 1998 -
Technical details
Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - injection volume: 231 cm³ - weight: 205 g Clamping unit: - Clamping force: 800 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 450 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - Ejector/picker: Yes - Voltage: 3x 400V, 50Hz, N, PE, 70A - Total power: 28 kW - Dimensions L/W/H: approx. 3,300 x 1,400 x 1,800 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.
Bridge Crane - Single Beam
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-03552 · Bridge Crane - Single Beam
Demag - - - 1994 -
Technical details
Overhead traveling crane number: 94283910About usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us.
- Markus Hirsch GmbH
- Hüttenstrasse 1
- 46284 Dorsten
- Deutschland
-
+49 2362 95035 12
+49 2362 95035 10 -
liersch@hirsch-maschinen.de
www.hirsch-maschinen.de
#1077-03550 · Bridge Crane - Single Beam
Demag - - - -
Technical details
43 ONLY BRIDGEIN LIFTING GEARAbout usmore than 500 machines in the warehouseover 8500 m² storage area, crane capacity 70 tmore than 1000 items Accessories for your workshopYou want to sell machines production lines or your company, then talk to us.
Chain Hoist - Electric
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-A1669 · Chain Hoist - Electric
DEMAG - PK 5 N Elektro Kettenzug 1000 - - unbekannt -
Technical details
Load capacity: 1000 kg Main lift at 1000kg: 5.0 m / min
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-M1716 · Chain Hoist - Electric
DEMAG - DKM 1-80 K V1 F4 Kettenzug - - unbekannt -
Technical details
DKM 1-80 K V1 F4 Load capacity: 80 kg Hook path: 2.8 m Main stroke: 8.0 m / min Fine stroke: 2.0 m / min
Datasheet
Request / Contact
- 1
- 2