,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          A + B Werkzeuge Maschinen Handels GmbH - Stockist for used machines

          Machinelist:


          lathe-conventional-electronic

          used  lathe-conventional-electronic BERNARDO SMART 410-1000 V DIGITAL


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207350 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 V DIGITAL - - 2013 -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52.0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5.5 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2100 x 1200 x 1450 mm︱
          ** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including inserts - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207350
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52.0 mm
            turning speeds 30 - 3000 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 5.5 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2100 x 1200 x 1450 mm
            Description :
            ** from a training workshop !!
            ** good condition - new price approx. 14.000 euros
            ** Special price on request

            Characteristics :
            - Standard with delta frequency converter
            - for high torque in the lower speed range
            . and almost constant speed under load
            - Infinitely variable speed control
            - The set speed is read via a digital display
            - Prism bed made of gray cast iron, induction hardened and precision ground
            - Central, handy switching for feeds and threads
            - with lead and pull spindle
            - Modern main spindle bearing with precision angular contact ball bearings
            - Standard with frequency converter and 3-axis position display
            - Hardened and ground gears and shafts, also in the feed gear
            - The speed and feed adjustment is simple
            - can be switched smoothly and precisely
            - Sliding tailstock for taper turning
            - Handwheel with adjustable fine scaling (0.02 mm)
            - The removable bridge
            - allows machining of large diameter workpieces

            Furnishing :
            - EASSON 3-axis digital display with LCD display
            - 1x 3-jaw steel chuck PO3-200 mm / D6
            - 1x flat/clamping jaw chuck
            - Fixed bezel - Passage diam. max. 135 mm
            - Revolving bezel - Passage diam. max. 65 mm
            - Foot pedal with braking function according to CE
            - MULTIFIX steel holder including inserts
            - Protective device for steel holder
            - Revolver stop with fine adjustment (end stop)
            - electric frequency converter
            - Coolant device
            - Slip clutch
            - Machine light
            - Chip back wall
            - Machine swing feet
            - other accessories such as rotating center punch etc.
            - Operating instructions (DE)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207350
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO SMART 410-1000 V DIGITAL


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207347 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 V DIGITAL - - 2013 -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52.0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5.5 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2100 x 1200 x 1450 mm︱
          ** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - 1x collet chuck including collets (inserts) - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including insert - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207347
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52.0 mm
            turning speeds 30 - 3000 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 5.5 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2100 x 1200 x 1450 mm
            Description :
            ** from a training workshop !!
            ** good condition - new price approx. 14.000 euros
            ** Special price on request

            Characteristics :
            - Standard with delta frequency converter
            - for high torque in the lower speed range
            . and almost constant speed under load
            - Infinitely variable speed control
            - The set speed is read via a digital display
            - Prism bed made of gray cast iron, induction hardened and precision ground
            - Central, handy switching for feeds and threads
            - with lead and pull spindle
            - Modern main spindle bearing with precision angular contact ball bearings
            - Standard with frequency converter and 3-axis position display
            - Hardened and ground gears and shafts, also in the feed gear
            - The speed and feed adjustment is simple
            - can be switched smoothly and precisely
            - Sliding tailstock for taper turning
            - Handwheel with adjustable fine scaling (0.02 mm)
            - The removable bridge
            - allows machining of large diameter workpieces

            Furnishing :
            - EASSON 3-axis digital display with LCD display
            - 1x 3-jaw steel chuck PO3-200 mm / D6
            - 1x flat/clamping jaw chuck
            - 1x collet chuck including collets (inserts)
            - Fixed bezel - Passage diam. max. 135 mm
            - Revolving bezel - Passage diam. max. 65 mm
            - Foot pedal with braking function according to CE
            - MULTIFIX steel holder including insert
            - Protective device for steel holder
            - Revolver stop with fine adjustment (end stop)
            - electric frequency converter
            - Coolant device
            - Slip clutch
            - Machine light
            - Chip back wall
            - Machine swing feet
            - other accessories such as rotating center punch etc.
            - Operating instructions (DE)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207347
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO SMART 410-1000 V DIGITAL


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207349 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 V DIGITAL - - 2013 -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52.0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5.5 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2100 x 1200 x 1450 mm︱
          ** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - 1x collet chuck including collets (inserts) - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including insert - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207349
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52.0 mm
            turning speeds 30 - 3000 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 5.5 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2100 x 1200 x 1450 mm
            Description :
            ** from a training workshop !!
            ** good condition - new price approx. 14.000 euros
            ** Special price on request

            Characteristics :
            - Standard with delta frequency converter
            - for high torque in the lower speed range
            . and almost constant speed under load
            - Infinitely variable speed control
            - The set speed is read via a digital display
            - Prism bed made of gray cast iron, induction hardened and precision ground
            - Central, handy switching for feeds and threads
            - with lead and pull spindle
            - Modern main spindle bearing with precision angular contact ball bearings
            - Standard with frequency converter and 3-axis position display
            - Hardened and ground gears and shafts, also in the feed gear
            - The speed and feed adjustment is simple
            - can be switched smoothly and precisely
            - Sliding tailstock for taper turning
            - Handwheel with adjustable fine scaling (0.02 mm)
            - The removable bridge
            - allows machining of large diameter workpieces

            Furnishing :
            - EASSON 3-axis digital display with LCD display
            - 1x 3-jaw steel chuck PO3-200 mm / D6
            - 1x flat/clamping jaw chuck
            - 1x collet chuck including collets (inserts)
            - Fixed bezel - Passage diam. max. 135 mm
            - Revolving bezel - Passage diam. max. 65 mm
            - Foot pedal with braking function according to CE
            - MULTIFIX steel holder including insert
            - Protective device for steel holder
            - Revolver stop with fine adjustment (end stop)
            - electric frequency converter
            - Coolant device
            - Slip clutch
            - Machine light
            - Chip back wall
            - Machine swing feet
            - other accessories such as rotating center punch etc.
            - Operating instructions (DE)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207349
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO SMART 410-1000 V DIGITAL


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207348 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 V DIGITAL - - 2013 -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52.0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5.5 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2100 x 1200 x 1450 mm︱
          ** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including inserts - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207348
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52.0 mm
            turning speeds 30 - 3000 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 5.5 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2100 x 1200 x 1450 mm
            Description :
            ** from a training workshop !!
            ** good condition - new price approx. 14.000 euros
            ** Special price on request

            Characteristics :
            - Standard with delta frequency converter
            - for high torque in the lower speed range
            . and almost constant speed under load
            - Infinitely variable speed control
            - The set speed is read via a digital display
            - Prism bed made of gray cast iron, induction hardened and precision ground
            - Central, handy switching for feeds and threads
            - with lead and pull spindle
            - Modern main spindle bearing with precision angular contact ball bearings
            - Standard with frequency converter and 3-axis position display
            - Hardened and ground gears and shafts, also in the feed gear
            - The speed and feed adjustment is simple
            - can be switched smoothly and precisely
            - Sliding tailstock for taper turning
            - Handwheel with adjustable fine scaling (0.02 mm)
            - The removable bridge
            - allows machining of large diameter workpieces

            Furnishing :
            - EASSON 3-axis digital display with LCD display
            - 1x 3-jaw steel chuck PO3-200 mm / D6
            - 1x flat/clamping jaw chuck
            - Fixed bezel - Passage diam. max. 135 mm
            - Revolving bezel - Passage diam. max. 65 mm
            - Foot pedal with braking function according to CE
            - MULTIFIX steel holder including inserts
            - Protective device for steel holder
            - Revolver stop with fine adjustment (end stop)
            - electric frequency converter
            - Coolant device
            - Slip clutch
            - Machine light
            - Chip back wall
            - Machine swing feet
            - other accessories such as rotating center punch etc.
            - Operating instructions (DE)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207348
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic ZMM / HUVEMA HU 310 VAC


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207305 · lathe-conventional-electronic

          ZMM / HUVEMA - HU 310 VAC - - 2004 -

          Technical details
          turning length 750 mm︱turning diameter 310 mm︱turning diameter over slide rest 175 mm︱spindle bore 32,0 mm︱tailstock quill taper MT 3 MK︱turning speeds 85 - 2200 U/min︱bed width 200 mm︱total power requirement 2,2 kW︱weight of the machine ca. 710 kg︱range L-W-H 1884 x 717 x 1262 mm︱
          ** New price ~ 23.000 euros ** from a training workshop (!!) Furnishing: - Spindle speed continuously adjustable in 2x switching stages - "TOS" 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - "NEWALL" digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Spindle bore 32 mm - Turning diameter over cross slide 175 mm - bed width 200 mm - Spindle mount / DIN55027 5 - Spindle taper 4.5 M - Spindle speed infinitely variable in switching stages 2 - Spindle speed stepless 85-405; 470-2200 rpm - Number of feeds 48 - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 710 kg
            turning length 750 mm
            turning diameter 310 mm
            turning diameter over slide rest 175 mm
            spindle bore 32,0 mm
            tailstock quill taper MT 3 MK
            turning speeds 85 - 2200 U/min
            bed width 200 mm
            total power requirement 2,2 kW
            weight of the machine ca. 710 kg
            range L-W-H 1884 x 717 x 1262 mm
            Description :
            ** New price ~ 23.000 euros
            ** from a training workshop (!!)

            Furnishing:
            - Spindle speed continuously adjustable in 2x switching stages
            - "TOS" 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key
            - "NEWALL" digital display, front left
            - MULTIFIX steel holder with inserts
            - Movable tailstock
            - live center, incl. quick-action drill chuck
            - digital speed display
            - Change gears
            - Foot/spindle brake

            * all technical data:
            - Turning diameter over bed 310 mm
            - Distance between centers 750 mm
            - Spindle bore 32 mm
            - Turning diameter over cross slide 175 mm
            - bed width 200 mm
            - Spindle mount / DIN55027 5
            - Spindle taper 4.5 M
            - Spindle speed infinitely variable in switching stages 2
            - Spindle speed stepless 85-405; 470-2200 rpm
            - Number of feeds 48
            - Metric thread range 0.1 - 28 mm
            - Thread module range 0.1 - 1.75
            - Thread DP range 4 - 70
            - Adjustment range cross slide 150 mm
            - Adjustment range top slide 95 mm
            - Tailstock quill diameter 40 mm
            - Tailstock recording 3 MK
            - Tailstock quill travel 100 mm
            - Motor power 2.2 kW
            - Weight 710 kg
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic ZMM - SLIVEN HU 310


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207330 · lathe-conventional-electronic

          ZMM - SLIVEN - HU 310 - - 2002 -

          Technical details
          turning length 750 mm︱turning diameter 310 mm︱turning diameter over slide rest 175 mm︱spindle bore 32,0 mm︱tailstock quill taper MT 3 MK︱turning speeds 85 - 2200 U/min︱bed width 200 mm︱spindle taper DIN 55027 GR 5 ︱total power requirement 2,2 kW︱weight of the machine ca. 710 kg︱range L-W-H 1884 x 717 x 1262 mm︱
          ** New price ~ 20.000 euros ** from a technical college (!!) Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207330 * Machinevideo : https://www.youtube.com/watch?v=iqU7Bkh6INo
            turning length 750 mm
            turning diameter 310 mm
            turning diameter over slide rest 175 mm
            spindle bore 32,0 mm
            tailstock quill taper MT 3 MK
            turning speeds 85 - 2200 U/min
            bed width 200 mm
            spindle taper DIN 55027 GR 5
            total power requirement 2,2 kW
            weight of the machine ca. 710 kg
            range L-W-H 1884 x 717 x 1262 mm
            Description :
            ** New price ~ 20.000 euros
            ** from a technical college (!!)

            Furnishing:
            - Robust conventional center lathe
            - 3-jaw lathe chuck Ø 160 mm, with replacement jaws
            - "NEWALL" digital display, front left
            - MULTIFIX steel holder with 4x inserts
            - fixed bezel
            - moving bezel
            - Movable tailstock
            - Foot/spindle brake
            - Machine swing feet
            - User manual (PDF/NL)

            * all technical data:
            - Turning diameter over bed 310 mm
            - Distance between centers 750 mm
            - Turning diameter over support 175 mm
            - Spindle bore 32 mm
            - bed width 200 mm
            - Spindle mount / DIN 55027 GR 5
            - Spindle taper 4.5 M
            - Spindle speed 85 - 2000 rpm.
            - Metric thread range 0.1 - 28 mm
            - Thread module range 0.1 - 1.75
            - Thread DP range 4 - 70
            - Adjustment range cross slide 150 mm
            - Adjustment range top slide 95 mm
            - Tailstock quill diameter 40 mm
            - Tailstock recording 3 MK
            - Tailstock quill travel 100 mm
            - Motor power 2.2 kW
            - Weight 770 kg

            * Machine link :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207330

            * Machinevideo :
            https://www.youtube.com/watch?v=iqU7Bkh6INo
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic QUANTUM D 460-1500 E


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207346 · lathe-conventional-electronic

          QUANTUM - D 460-1500 E - - 2000 -

          Technical details
          turning length 1500 mm︱turning diameter over bed 460 mm︱turning diameter over slide rest 240 mm︱turning dia. in gap 650 mm︱number of spindle speeds 32 - 2000 U/min.︱turning speeds 12 Stk.︱spindle bore Ø 58.0 mm︱quill stroke 130 mm︱bed width 300 mm︱tailstock quill taper MT DIN 228 / MK 4 ︱spindle taper DIN 55027 / D 1-6" ︱feeds - longitudinal 0,031 - 1.7 mm/U︱feeds - cross 0,014 - 0,784 mm/U︱voltage 380 V︱total power requirement 5.5 kW︱weight of the machine ca. 1977 kg︱range L-W-H 2750 x 1080 x 1370 mm︱
          ** Machine from a maintenance workshop ** current new price ~ 17.500 euros ** Special price on request Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - RÖHM 3-jaw chuck, including replacement jaws & chuck key - foldable lathe chuck protection - MULTIFIX steel holder - size B - with 2x inserts - movable tailstock, with rotating center center - universally adjustable machine light - Chip protection back wall - EMERGENCY stop button at the front - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207346
            turning length 1500 mm
            turning diameter over bed 460 mm
            turning diameter over slide rest 240 mm
            turning dia. in gap 650 mm
            number of spindle speeds 32 - 2000 U/min.
            turning speeds 12 Stk.
            spindle bore Ø 58.0 mm
            quill stroke 130 mm
            bed width 300 mm
            tailstock quill taper MT DIN 228 / MK 4
            spindle taper DIN 55027 / D 1-6"
            feeds - longitudinal 0,031 - 1.7 mm/U
            feeds - cross 0,014 - 0,784 mm/U
            voltage 380 V
            total power requirement 5.5 kW
            weight of the machine ca. 1977 kg
            range L-W-H 2750 x 1080 x 1370 mm
            Description :
            ** Machine from a maintenance workshop
            ** current new price ~ 17.500 euros
            ** Special price on request

            Lathe with precision ground and induction hardened bed.
            Very suitable, for example, for use in workshops and teaching facilities.

            Furnishing:
            - robust lead and pull spindle lathe
            - RÖHM 3-jaw chuck, including replacement jaws & chuck key
            - foldable lathe chuck protection
            - MULTIFIX steel holder - size B - with 2x inserts
            - movable tailstock, with rotating center center
            - universally adjustable machine light
            - Chip protection back wall
            - EMERGENCY stop button at the front
            - User manual (PDF)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207346
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic ZMM - SLIVEN HU 310


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207331 · lathe-conventional-electronic

          ZMM - SLIVEN - HU 310 - - 2000 -

          Technical details
          turning length 750 mm︱turning diameter 310 mm︱centre height 175 mm︱spindle bore 32,0 mm︱tailstock quill taper MT 3 MK︱turning speeds 85 - 2200 U/min︱bed width 200 mm︱spindle taper DIN 55027 GR 5 ︱total power requirement 2,2 kW︱weight of the machine ca. 710 kg︱range L-W-H 1884 x 717 x 1262 mm︱
          ** New price ~ 20.000 euros ** from a technical college (!!) Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left - MULTIFIX steel holder with 3x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207331
            turning length 750 mm
            turning diameter 310 mm
            centre height 175 mm
            spindle bore 32,0 mm
            tailstock quill taper MT 3 MK
            turning speeds 85 - 2200 U/min
            bed width 200 mm
            spindle taper DIN 55027 GR 5
            total power requirement 2,2 kW
            weight of the machine ca. 710 kg
            range L-W-H 1884 x 717 x 1262 mm
            Description :
            ** New price ~ 20.000 euros
            ** from a technical college (!!)

            Furnishing:
            - Robust conventional center lathe
            - 3-jaw lathe chuck Ø 160 mm, with replacement jaws
            - "NEWALL" digital display, front left
            - MULTIFIX steel holder with 3x inserts
            - fixed bezel
            - moving bezel
            - Movable tailstock
            - Foot/spindle brake
            - Machine swing feet
            - User manual (PDF/NL)

            * all technical data:
            - Turning diameter over bed 310 mm
            - Distance between centers 750 mm
            - Turning diameter over support 175 mm
            - Spindle bore 32 mm
            - bed width 200 mm
            - Spindle mount / DIN 55027 GR 5
            - Spindle taper 4.5 M
            - Spindle speed 85 - 2000 rpm.
            - Metric thread range 0.1 - 28 mm
            - Thread module range 0.1 - 1.75
            - Thread DP range 4 - 70
            - Adjustment range cross slide 150 mm
            - Adjustment range top slide 95 mm
            - Tailstock quill diameter 40 mm
            - Tailstock recording 3 MK
            - Tailstock quill travel 100 mm
            - Motor power 2.2 kW
            - Weight 770 kg

            * Machine link :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207331
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic COLCHESTER TRIUMPH V/S 2500


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207343 · lathe-conventional-electronic

          COLCHESTER - TRIUMPH V/S 2500 - - 1995 -

          Technical details
          turning length 1250 mm︱turning diameter over bed 400 mm︱turning diameter over slide rest 246 mm︱turning speed range 15 - 2500 U/min︱spindle bore 54,0 mm︱quill stroke 140 mm︱morse taper 4 MK︱feed range 0,036 - 1,2 mm/U︱bed width 318 mm︱work height max. 1050 mm︱travel -x axis Plan 250 mm︱travel -z axis Ober 130 mm︱spindle nose D1-6" Camlock ︱total power requirement 7,5 kW︱weight of the machine ca. 1500 kg.︱dimensions of the machine ca. 2500 x 1100 x 1300 mm︱
          ** from a training workshop ** good condition (!) The Colchester Triumph VS is the “all-rounder”. From the heavy cutting This precision machine corresponds to the fine precision finish Requirements from modern tool construction, form construction or training company. Furnishing: - 3 -cheezing - diameter 200 mm, with replacement cheeks - Multifix steel holder, with use - Continuous speed adjustment via electric potentiometer - digital speed display - sliding riding stock - feed key - Coolant pan - Not from button, front - Spanning back wall - User manual (PDF) * Maschinenlink: http://mhp.logotech.de/hpm/v7/datenblatt/datenblatt.php?machineno=1008-9207343
            turning length 1250 mm
            turning diameter over bed 400 mm
            turning diameter over slide rest 246 mm
            turning speed range 15 - 2500 U/min
            spindle bore 54,0 mm
            quill stroke 140 mm
            morse taper 4 MK
            feed range 0,036 - 1,2 mm/U
            bed width 318 mm
            work height max. 1050 mm
            travel -x axis Plan 250 mm
            travel -z axis Ober 130 mm
            spindle nose D1-6" Camlock
            total power requirement 7,5 kW
            weight of the machine ca. 1500 kg.
            dimensions of the machine ca. 2500 x 1100 x 1300 mm
            Description :
            ** from a training workshop
            ** good condition (!)

            The Colchester Triumph VS is the “all-rounder”. From the heavy cutting
            This precision machine corresponds to the fine precision finish
            Requirements from modern tool construction, form construction or training
            company.

            Furnishing:
            - 3 -cheezing - diameter 200 mm, with replacement cheeks
            - Multifix steel holder, with use
            - Continuous speed adjustment via electric potentiometer
            - digital speed display
            - sliding riding stock
            - feed key
            - Coolant pan
            - Not from button, front
            - Spanning back wall
            - User manual (PDF)

            * Maschinenlink:
            http://mhp.logotech.de/hpm/v7/datenblatt/datenblatt.php?machineno=1008-9207343
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic WEILER COMMODOR


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207335 · lathe-conventional-electronic

          WEILER - COMMODOR - - 1989 -

          Technical details
          turning length 1000 mm︱turning diameter over bed 380 mm︱turning diameter over slide rest 190 mm︱number of spindle speeds 25 - 2000 U/min.︱turning speeds 18 Stk.︱spindle bore Ø 56,0 mm︱tailstock quill taper MT DIN 228 / MK 4 ︱quill stroke 150 mm︱bed width 310 mm︱spindle taper DIN 55027 / 6 ︱feeds - longitudinal 0,022 - 0,8 mm/U︱feeds - cross 0,011 - 0,4 mm/U︱thread M 0,3 - 10,0 mm︱voltage 380 V︱total power requirement 7,5 kW︱weight of the machine ca. 1600 kg︱range L-W-H 2320 x 1400 x 1600 mm︱
          ** Machine from a workshop for the disabled Lathe with precision ground and induction hardened bed. Very suitable e.g. for use in workshops and training centres. Furnishing: - Robust main lathe and spindle lathe with VARIO gear - 2 axis "HEIDENHAIN" digital display, front left - FORKARDT 3-jaw chuck Ø 200 mm, with spare jaws & chuck key - foldable lathe chuck protection - MULTIFIX steel holder - size B - with 5x inserts - Movable tailstock, with live center - Chip protection rear panel - 4x machine swing feet - 2x EMERGENCY OFF button on the front - Lead/feed screw protection - adjustable bed stop - Various application / turning tools * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207335
            turning length 1000 mm
            turning diameter over bed 380 mm
            turning diameter over slide rest 190 mm
            number of spindle speeds 25 - 2000 U/min.
            turning speeds 18 Stk.
            spindle bore Ø 56,0 mm
            tailstock quill taper MT DIN 228 / MK 4
            quill stroke 150 mm
            bed width 310 mm
            spindle taper DIN 55027 / 6
            feeds - longitudinal 0,022 - 0,8 mm/U
            feeds - cross 0,011 - 0,4 mm/U
            thread M 0,3 - 10,0 mm
            voltage 380 V
            total power requirement 7,5 kW
            weight of the machine ca. 1600 kg
            range L-W-H 2320 x 1400 x 1600 mm
            Description :
            ** Machine from a workshop for the disabled

            Lathe with precision ground and induction hardened bed.
            Very suitable e.g. for use in workshops and training centres.

            Furnishing:
            - Robust main lathe and spindle lathe with VARIO gear
            - 2 axis "HEIDENHAIN" digital display, front left
            - FORKARDT 3-jaw chuck Ø 200 mm, with spare jaws & chuck key
            - foldable lathe chuck protection
            - MULTIFIX steel holder - size B - with 5x inserts
            - Movable tailstock, with live center
            - Chip protection rear panel
            - 4x machine swing feet
            - 2x EMERGENCY OFF button on the front
            - Lead/feed screw protection
            - adjustable bed stop
            - Various application / turning tools

            * Machine link :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207335
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic VEB MIKROMAT DLZ 315x500/3eG


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207319 · lathe-conventional-electronic

          VEB MIKROMAT - DLZ 315x500/3eG - - 1985 / 2013 -

          Technical details
          turning length 600 mm︱turning diameter over bed 360 mm︱turning diameter over slide rest 190 mm︱bed width 295 mm︱number of spindle speeds 45 - 2240 U/min.︱spindle bore 33,0 mm︱tailstock quill taper MT MK 3 ︱feed Längs 0,02-0,8 mm/U︱feed Quer 0,0125-0,5 mm/U︱total power requirement 5,5 kW︱weight of the machine ca. 1900 kg︱range L-W-H 2050 x 950 x 1280 mm︱
          ** Refurbished and repainted in 2013 ** Costs around 16.000 euros Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points - chuck key - Movable tailstock - Operation manual
            turning length 600 mm
            turning diameter over bed 360 mm
            turning diameter over slide rest 190 mm
            bed width 295 mm
            number of spindle speeds 45 - 2240 U/min.
            spindle bore 33,0 mm
            tailstock quill taper MT MK 3
            feed Längs 0,02-0,8 mm/U
            feed Quer 0,0125-0,5 mm/U
            total power requirement 5,5 kW
            weight of the machine ca. 1900 kg
            range L-W-H 2050 x 950 x 1280 mm
            Description :
            ** Refurbished and repainted in 2013
            ** Costs around 16.000 euros

            Furnishing:
            - WNW NILES 3-jaw chuck Ø 200 mm
            - Multifix steel holder size B with inserts
            - revolving center points
            - chuck key
            - Movable tailstock
            - Operation manual
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic VDF HEIDENREICH & HARBECK HANSEAT 640


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207337 · lathe-conventional-electronic

          VDF HEIDENREICH & HARBECK - HANSEAT 640 - - 1978 -

          Technical details
          turning length 1000 mm︱turning diameter over bed 640 mm︱turning diameter over slide rest 380 mm︱spindle turning speed range 9.0 - 1800 U/min︱spindle bore 65,0 mm︱morse taper 5 MK︱quill stroke 225 mm︱bed width 405 mm︱spindle taper DIN 55022 Gr. 8︱adjustment Plan 410 mm︱adjustment Ober 140 mm︱total power requirement 11 - 18.5 kW︱weight of the machine ca. 3200 kg.︱dimensions of the machine ca. 2950 x 1200 x 1500 mm︱
          ** from a maintenance workshop - good condition (!!) ** Machine was checked annually Furnishing: - heavy - robust lead/pull spindle machine - "WERNER GARANT" face plate Ø 500 mm - HEIDENHAIN digital display - type ND 730 - MULTIFIX steel holder, with 3x inserts - "FINN SAFETY" lining protection - type SPS 600 - movable tailstock - Machine light - 1x food key - Chip back wall - movable bed stop - 2x EMERGENCY STOP switches - Coolant system, with collecting tray * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207337
            turning length 1000 mm
            turning diameter over bed 640 mm
            turning diameter over slide rest 380 mm
            spindle turning speed range 9.0 - 1800 U/min
            spindle bore 65,0 mm
            morse taper 5 MK
            quill stroke 225 mm
            bed width 405 mm
            spindle taper DIN 55022 Gr. 8
            adjustment Plan 410 mm
            adjustment Ober 140 mm
            total power requirement 11 - 18.5 kW
            weight of the machine ca. 3200 kg.
            dimensions of the machine ca. 2950 x 1200 x 1500 mm
            Description :
            ** from a maintenance workshop - good condition (!!)
            ** Machine was checked annually

            Furnishing:
            - heavy - robust lead/pull spindle machine
            - "WERNER GARANT" face plate Ø 500 mm
            - HEIDENHAIN digital display - type ND 730
            - MULTIFIX steel holder, with 3x inserts
            - "FINN SAFETY" lining protection - type SPS 600
            - movable tailstock
            - Machine light
            - 1x food key
            - Chip back wall
            - movable bed stop
            - 2x EMERGENCY STOP switches
            - Coolant system, with collecting tray

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207337
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic VDF HEIDENREICH & HARBECK HAMBURG 430


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207336 · lathe-conventional-electronic

          VDF HEIDENREICH & HARBECK - HAMBURG 430 - - 1975 -

          Technical details
          turning length 1000 mm︱turning diameter over bed 430 mm︱turning diameter over slide rest 235 mm︱spindle turning speed range 11.2 - 2000 U/min︱spindle bore 56,0 mm︱morse taper 4 MK︱quill stroke 135 mm︱bed width 333 mm︱spindle taper DIN 55022 Gr. 6︱total power requirement 7,75 kW︱weight of the machine ca. 1950 kg.︱dimensions of the machine ca. 2700 x 1200 x 1600 mm︱
          ** from a workshop for the disabled (!!) Furnishing: - robust master/feed spindle machine - FORKARDT 3-jaw chuck Ø 200 mm (DIN 55027 size 6) - HEIDENHAIN digital display - MULTIFIX steel holder, with insert - Movable tailstock - chuck key - chip rear wall - sliding bed stop - Protection for bed rails - live center - Coolant device, with drip tray
            turning length 1000 mm
            turning diameter over bed 430 mm
            turning diameter over slide rest 235 mm
            spindle turning speed range 11.2 - 2000 U/min
            spindle bore 56,0 mm
            morse taper 4 MK
            quill stroke 135 mm
            bed width 333 mm
            spindle taper DIN 55022 Gr. 6
            total power requirement 7,75 kW
            weight of the machine ca. 1950 kg.
            dimensions of the machine ca. 2700 x 1200 x 1600 mm
            Description :
            ** from a workshop for the disabled (!!)

            Furnishing:
            - robust master/feed spindle machine
            - FORKARDT 3-jaw chuck Ø 200 mm (DIN 55027 size 6)
            - HEIDENHAIN digital display
            - MULTIFIX steel holder, with insert
            - Movable tailstock
            - chuck key
            - chip rear wall
            - sliding bed stop
            - Protection for bed rails
            - live center
            - Coolant device, with drip tray
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO SMART 410-1000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203008 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 Digital - - -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52,0 mm︱turning speeds 45 - 1800 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 3,3 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2,03 x 1,0 x 1,45 m︱
          Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Revolving steady rest - passage diam. max. 65 mm - coolant device - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - slip clutch - Revolver stop with fine adjustment - Thread clock - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First filling with Shell Tellus 46 - LED machine light - change gears - reducing sleeve - 2 center points - Chip back wall - Operating tool
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52,0 mm
            turning speeds 45 - 1800 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 3,3 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2,03 x 1,0 x 1,45 m
            Description :
            Furnishing :
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw chuck DK11-200 mm / D6
            - clamping disc 350 mm
            - Fixed bezel - passage diam. max. 135 mm
            - Revolving steady rest - passage diam. max. 65 mm
            - coolant device
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - Micrometer longitudinal stop
            - slip clutch
            - Revolver stop with fine adjustment
            - Thread clock
            - Motor with magnetic brake according to CE standard
            - Foot pedal with brake function according to CE
            - First filling with Shell Tellus 46
            - LED machine light
            - change gears
            - reducing sleeve
            - 2 center points
            - Chip back wall
            - Operating tool
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO TITAN 560-2000 PRO


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203115 · lathe-conventional-electronic

          BERNARDO - TITAN 560-2000 PRO - - -

          Technical details
          turning length 2000 mm︱turning diameter 560 mm︱turning diameter over slide 350 mm︱turning speeds 25 - 1500 U/min︱swing diameter over bed slide 350 mm︱turning dia. in gap 785 mm︱quill travel 180 mm︱quill: 5 MK︱spindle bore 105 mm︱engine output 7,5 kW︱spindle taper DIN 55029 D 1-8︱weight of the machine ca. 2720 kg.︱
          Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - First filling with Shell Tellus 46 - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - slip clutch - LED machine light - change gears - reducing sleeve - Chip back wall - operating tool
            turning length 2000 mm
            turning diameter 560 mm
            turning diameter over slide 350 mm
            turning speeds 25 - 1500 U/min
            swing diameter over bed slide 350 mm
            turning dia. in gap 785 mm
            quill travel 180 mm
            quill: 5 MK
            spindle bore 105 mm
            engine output 7,5 kW
            spindle taper DIN 55029 D 1-8
            weight of the machine ca. 2720 kg.
            Description :
            Furnishing :
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw chuck PS3-315 mm / D8
            - clamping disc 450 mm
            - Fixed bezel - passage diam. max. 180 mm
            - Live steady rest - passage diam. max. 120 mm
            - 2 center points
            - First filling with Shell Tellus 46
            - Motor with magnetic brake according to CE standard
            - Foot pedal with brake function according to CE
            - coolant device
            - Quick change tool holder with 4 inserts
            - Protective device for quick-change tool holders
            - slip clutch
            - LED machine light
            - change gears
            - reducing sleeve
            - Chip back wall
            - operating tool
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO MASTER PRO 360


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203096 · lathe-conventional-electronic

          BERNARDO - MASTER PRO 360 - - -

          Technical details
          turning length 1000 mm︱turning diameter 360 mm︱swing diameter over bed slide 220 mm︱turning dia. in gap 502 mm︱spindle bore 52,0 mm︱turning speeds 70 - 2.000 U/min︱bed width 185 mm︱spindle taper 55029 D 1-5︱taper in tailstock 3 MK︱quill travel 100 mm︱total power requirement 1,5 / 2,2 kW︱weight of the machine ca. 575 kg.︱range L-W-H 1825 x 750 x 1600 mm︱
          scope of delivery : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 60 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 280 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base with drawers - operating tool
            turning length 1000 mm
            turning diameter 360 mm
            swing diameter over bed slide 220 mm
            turning dia. in gap 502 mm
            spindle bore 52,0 mm
            turning speeds 70 - 2.000 U/min
            bed width 185 mm
            spindle taper 55029 D 1-5
            taper in tailstock 3 MK
            quill travel 100 mm
            total power requirement 1,5 / 2,2 kW
            weight of the machine ca. 575 kg.
            range L-W-H 1825 x 750 x 1600 mm
            Description :
            scope of delivery :
            - 3-axis digital display i200 with LCD display
            - 3-jaw chuck DK11-200 mm / D5
            - Face plate 200 mm / D5, according to DIN 55029
            - Fixed bezel - passage diam. max. 70 mm
            - Live steady rest - passage diam. max. 60 mm
            - coolant device
            - First filling with Shell Tellus 46
            - Pull-out chip tray
            - clamping disc 280 mm
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - slip clutch
            - Longitudinal micrometer stop
            - Thread clock
            - LED machine light
            - reducing sleeve
            - change gears
            - 2 center points
            - Foot pedal with brake function according to CE
            - Motor with magnetic brake according to CE standard
            - Base with drawers
            - operating tool
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO MASTER 380-1000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203117 · lathe-conventional-electronic

          BERNARDO - MASTER 380-1000 Digital - - -

          Technical details
          turning length 1000 mm︱turning diameter 380 mm︱turning dia. in gap 490 mm︱spindle bore 51,0 mm︱turning speeds 70 - 2000 U/min︱bed width 185 mm︱spindle taper 55029 D 1-5︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 1,5 / 2,2 kW︱weight of the machine ca. 575 kg.︱range L-W-H 1920 x 800 x 1660 mm︱
          Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 50 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base with drawers - operating tool Special accessories included in the price: - 3-axis digital display
            turning length 1000 mm
            turning diameter 380 mm
            turning dia. in gap 490 mm
            spindle bore 51,0 mm
            turning speeds 70 - 2000 U/min
            bed width 185 mm
            spindle taper 55029 D 1-5
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 1,5 / 2,2 kW
            weight of the machine ca. 575 kg.
            range L-W-H 1920 x 800 x 1660 mm
            Description :
            Furnishing :
            - 3-axis digital display i200 with LCD display
            - 3-jaw chuck DK11-200 mm / D5
            - Face plate 200 mm / D5, according to DIN 55029
            - Fixed bezel - passage diam. max. 70 mm
            - Live steady rest - passage diam. max. 50 mm
            - coolant device
            - First filling with Shell Tellus 46
            - Pull-out chip tray
            - clamping disc 320 mm
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - slip clutch
            - Longitudinal micrometer stop
            - Thread clock
            - LED machine light
            - reducing sleeve
            - change gears
            - 2 center points
            - Foot pedal with brake function according to CE
            - Motor with magnetic brake according to CE standard
            - Base with drawers
            - operating tool

            Special accessories included in the price:
            - 3-axis digital display
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO TITAN 660-3000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203100 · lathe-conventional-electronic

          BERNARDO - TITAN 660-3000 Digital - - -

          Technical details
          turning length 3000 mm︱turning diameter 660 mm︱turning dia. in gap 900 mm︱turning diameter over slide 460 mm︱turning speeds 25 - 1600 U/min︱quill: 5 MK︱quill travel 235 mm︱spindle bore 105,0 mm︱engine output 7,5 kW︱spindle taper DIN 55029 D 1-8︱weight of the machine ca. 3.300 kg.︱dimensions 4.630 x 1.200 x 1.529 mm︱
          scope of delivery : - 3-axis digital display ES-12 V with LCD display - slip clutch - Rapid traverse lengthways and flat - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First filling with Shell Tellus 46 - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - change gears - reducing sleeve - Chip back wall - Cable routing via energy chain - operating tool
            turning length 3000 mm
            turning diameter 660 mm
            turning dia. in gap 900 mm
            turning diameter over slide 460 mm
            turning speeds 25 - 1600 U/min
            quill: 5 MK
            quill travel 235 mm
            spindle bore 105,0 mm
            engine output 7,5 kW
            spindle taper DIN 55029 D 1-8
            weight of the machine ca. 3.300 kg.
            dimensions 4.630 x 1.200 x 1.529 mm
            Description :
            scope of delivery :
            - 3-axis digital display ES-12 V with LCD display
            - slip clutch
            - Rapid traverse lengthways and flat
            - LED machine light
            - 3-jaw steel chuck PO3-315 mm / D8
            - clamping disc 450 mm
            - Fixed bezel - passage diam. max. 180 mm
            - Live steady rest - passage diam. max. 120 mm
            - 2 center points
            - Motor with magnetic brake according to CE standard
            - Foot pedal with brake function according to CE
            - First filling with Shell Tellus 46
            - coolant device
            - Quick change tool holder with 4 inserts
            - Protective device for quick-change tool holders
            - change gears
            - reducing sleeve
            - Chip back wall
            - Cable routing via energy chain
            - operating tool
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO Standard 165 V-D


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203140 · lathe-conventional-electronic

          BERNARDO - Standard 165 V-D - - -

          Technical details
          turning length 1000 mm︱turning diameter 350 mm︱turning dia. in gap 450 mm︱spindle bore 40,0 mm︱turning speeds 70 - 2000 U/min︱bed width 180 mm︱spindle taper 55029 D 1-4︱taper in tailstock 3 MK︱quill travel 110 mm︱total power requirement 1,5 kW︱weight of the machine ca. 529 kg.︱range L-W-H 1730x700x1340 mm︱
          Scope of delivery: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-160 mm / D4 - Face plate 200 mm / D4, according to DIN 55029 - Fixed bezel - passage diam. max. 60 mm - Live steady rest - passage diam. max. 60 mm - clamping disc 250 mm - Quadruple steel holder - Shaft fixing device - Protective device at steel holder - slip clutch - Longitudinal micrometer stop - coolant device - Pull-out chip tray - Frequency converter - Foot pedal with brake function according to CE - bulkhead - Thread clock - LED machine light - Digital speed display - reducing sleeve - change gears - 2 center points - underframe - operating tool
            turning length 1000 mm
            turning diameter 350 mm
            turning dia. in gap 450 mm
            spindle bore 40,0 mm
            turning speeds 70 - 2000 U/min
            bed width 180 mm
            spindle taper 55029 D 1-4
            taper in tailstock 3 MK
            quill travel 110 mm
            total power requirement 1,5 kW
            weight of the machine ca. 529 kg.
            range L-W-H 1730x700x1340 mm
            Description :
            Scope of delivery:
            - 3-axis digital display i200 with LCD display
            - 3-jaw chuck DK11-160 mm / D4
            - Face plate 200 mm / D4, according to DIN 55029
            - Fixed bezel - passage diam. max. 60 mm
            - Live steady rest - passage diam. max. 60 mm
            - clamping disc 250 mm
            - Quadruple steel holder
            - Shaft fixing device
            - Protective device at steel holder
            - slip clutch
            - Longitudinal micrometer stop
            - coolant device
            - Pull-out chip tray
            - Frequency converter
            - Foot pedal with brake function according to CE
            - bulkhead
            - Thread clock
            - LED machine light
            - Digital speed display
            - reducing sleeve
            - change gears
            - 2 center points
            - underframe
            - operating tool
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO MASTER 180-1000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203120 · lathe-conventional-electronic

          BERNARDO - MASTER 180-1000 Digital - - -

          Technical details
          turning length 1000 mm︱turning diameter 360 mm︱turning dia. in gap 480 mm︱spindle bore 51,0 mm︱turning speeds 70 - 2000 U/min︱bed width 185 mm︱spindle taper 55029 D 1-5︱taper in tailstock 4 MK︱quill travel 110 mm︱total power requirement 1,5 kW︱weight of the machine ca. 540 kg.︱range L-W-H 1920 x 750 x 1600 mm︱
          Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 50 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - underframe - operating tool
            turning length 1000 mm
            turning diameter 360 mm
            turning dia. in gap 480 mm
            spindle bore 51,0 mm
            turning speeds 70 - 2000 U/min
            bed width 185 mm
            spindle taper 55029 D 1-5
            taper in tailstock 4 MK
            quill travel 110 mm
            total power requirement 1,5 kW
            weight of the machine ca. 540 kg.
            range L-W-H 1920 x 750 x 1600 mm
            Description :
            Furnishing :
            - 3-axis digital display i200 with LCD display
            - 3-jaw chuck DK11-200 mm / D5
            - Face plate 200 mm / D5, according to DIN 55029
            - Fixed bezel - passage diam. max. 70 mm
            - Live steady rest - passage diam. max. 50 mm
            - coolant device
            - First filling with Shell Tellus 46
            - Pull-out chip tray
            - clamping disc 320 mm
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - slip clutch
            - Longitudinal micrometer stop
            - Thread clock
            - LED machine light
            - reducing sleeve
            - change gears
            - 2 center points
            - Foot pedal with brake function according to CE
            - Motor with magnetic brake according to CE standard
            - underframe
            - operating tool
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO TITAN 800-3000 Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203147 · lathe-conventional-electronic

          BERNARDO - TITAN 800-3000 Digital - - -

          Technical details
          turning length 3000 mm︱turning diameter 800 mm︱turning dia. in gap 1000 mm︱turning diameter over slide 540 mm︱turning speeds 25 - 1600 U/min︱quill: 5 MK︱quill travel 235 mm︱spindle bore 105,0 mm︱engine output 7,5 kW︱spindle taper DIN 55029 D 1-8︱weight of the machine ca. 3820 kg.︱dimensions 4800 x 1320 x 1580 mm︱
          Scope of delivery - 3-axis digital display ES-12 V with LCD display - Cable routing via energy chain - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 500 mm - Fixed bezel - Passage diam. 180mm max - Revolving bezel - passage diam. 100mm max - 2 center points - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First fill with Shell Tellus 46 - Rapid traverse longitudinal and face - slip clutch - Cooling device - Quick change steel holder with 4 inserts - Protective device for quick-change tool holder - LED machine light - Change gears - Reducing sleeve - chip rear wall - Operating tool
            turning length 3000 mm
            turning diameter 800 mm
            turning dia. in gap 1000 mm
            turning diameter over slide 540 mm
            turning speeds 25 - 1600 U/min
            quill: 5 MK
            quill travel 235 mm
            spindle bore 105,0 mm
            engine output 7,5 kW
            spindle taper DIN 55029 D 1-8
            weight of the machine ca. 3820 kg.
            dimensions 4800 x 1320 x 1580 mm
            Description :
            Scope of delivery
            - 3-axis digital display ES-12 V with LCD display
            - Cable routing via energy chain
            - 3-jaw chuck PS3-315 mm / D8
            - Clamping disc 500 mm
            - Fixed bezel - Passage diam. 180mm max
            - Revolving bezel - passage diam. 100mm max
            - 2 center points
            - Motor with magnetic brake according to CE standard
            - Foot pedal with brake function according to CE
            - First fill with Shell Tellus 46
            - Rapid traverse longitudinal and face
            - slip clutch
            - Cooling device
            - Quick change steel holder with 4 inserts
            - Protective device for quick-change tool holder
            - LED machine light
            - Change gears
            - Reducing sleeve
            - chip rear wall
            - Operating tool
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO SMART 410-1000 Vario Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203099 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 Vario Digital - - -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52,0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2,03 x 1,0 x 1,45 m︱
          scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Live steady rest - passage diam. max. 65 mm - Foot pedal with brake function according to CE - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - Revolver stop with fine adjustment - Frequency converter - First filling with Shell Tellus 46 - coolant device - slip clutch - Thread clock - LED machine light - change gears - reducing sleeve - 2 center points - Chip back wall - operating tool
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52,0 mm
            turning speeds 30 - 3000 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2,03 x 1,0 x 1,45 m
            Description :
            scope of delivery :
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw steel chuck PO3-200 mm / D6
            - clamping disc 350 mm
            - Fixed bezel - passage diam. max. 135 mm
            - Live steady rest - passage diam. max. 65 mm
            - Foot pedal with brake function according to CE
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - Micrometer longitudinal stop
            - Revolver stop with fine adjustment
            - Frequency converter
            - First filling with Shell Tellus 46
            - coolant device
            - slip clutch
            - Thread clock
            - LED machine light
            - change gears
            - reducing sleeve
            - 2 center points
            - Chip back wall
            - operating tool
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO TITAN 660 - 2000


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203006 · lathe-conventional-electronic

          BERNARDO - TITAN 660 - 2000 - - -

          Technical details
          turning length 2000 mm︱centre height 330 mm︱swing diameter over bed slide 660 mm︱swing diameter over slide rest 460 mm︱turning dia. in gap 900 mm︱spindle bore 105 mm︱turning speeds 25 - 1600 U/min︱bed width 400 mm︱spindle taper 55029 D 1-8︱taper in tailstock 5 MK︱quill travel 235 mm︱total power requirement 7,5 kW︱weight of the machine ca. 2900 kg.︱range L-W-H 3630 x 1200 x 1520 mm︱
          Scope of delivery : - 3-axis digital display ES-12 V with LCD display - Slip clutch - Rapid traverse longitudinally and flatly - LED machine light - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 450 mm - Fixed bezel - Passage diam. max. 180 mm - Revolving bezel - Passage diam. max. 120mm - 2 centering points - Motor with magnetic brake according to CE standards - Foot pedal with braking function according to CE - Initial filling with Shell Tellus 46 - Coolant device - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Interchangeable wheels - reducing sleeve - Chip back wall - Cable routing via energy chain - Operating tool
            turning length 2000 mm
            centre height 330 mm
            swing diameter over bed slide 660 mm
            swing diameter over slide rest 460 mm
            turning dia. in gap 900 mm
            spindle bore 105 mm
            turning speeds 25 - 1600 U/min
            bed width 400 mm
            spindle taper 55029 D 1-8
            taper in tailstock 5 MK
            quill travel 235 mm
            total power requirement 7,5 kW
            weight of the machine ca. 2900 kg.
            range L-W-H 3630 x 1200 x 1520 mm
            Description :
            Scope of delivery :
            - 3-axis digital display ES-12 V with LCD display
            - Slip clutch
            - Rapid traverse longitudinally and flatly
            - LED machine light
            - 3-jaw chuck PS3-315 mm / D8
            - Clamping disk 450 mm
            - Fixed bezel - Passage diam. max. 180 mm
            - Revolving bezel - Passage diam. max. 120mm
            - 2 centering points
            - Motor with magnetic brake according to CE standards
            - Foot pedal with braking function according to CE
            - Initial filling with Shell Tellus 46
            - Coolant device
            - Quick-change tool holder with 4 inserts
            - Protective device for quick-change tool holder
            - Interchangeable wheels
            - reducing sleeve
            - Chip back wall
            - Cable routing via energy chain
            - Operating tool
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BERNARDO SMART 410-1500 Vario Digital


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8203151 · lathe-conventional-electronic

          BERNARDO - SMART 410-1500 Vario Digital - - -

          Technical details
          turning length 1500 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52,0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1400 kg.︱range L-W-H 2530 x 1000 x 1450 mm︱
          scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Live steady rest - passage diam. max. 65 mm - Foot pedal with brake function according to CE - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - Revolver stop with fine adjustment - Frequency converter - First filling with Shell Tellus 46 - coolant device - slip clutch - Thread clock - LED machine light - change gears - reducing sleeve - 2 center points - Chip back wall - operating tool
            turning length 1500 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52,0 mm
            turning speeds 30 - 3000 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1400 kg.
            range L-W-H 2530 x 1000 x 1450 mm
            Description :
            scope of delivery :
            - 3-axis digital display ES-12 V with LCD display
            - 3-jaw steel chuck PO3-200 mm / D6
            - clamping disc 350 mm
            - Fixed bezel - passage diam. max. 135 mm
            - Live steady rest - passage diam. max. 65 mm
            - Foot pedal with brake function according to CE
            - Quadruple steel holder
            - Protective device with quadruple steel holder
            - Micrometer longitudinal stop
            - Revolver stop with fine adjustment
            - Frequency converter
            - First filling with Shell Tellus 46
            - coolant device
            - slip clutch
            - Thread clock
            - LED machine light
            - change gears
            - reducing sleeve
            - 2 center points
            - Chip back wall
            - operating tool
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

            Profil de commerçant: A + B Werkzeuge Maschinen Handels GmbH

          Contacter le commerçant



            A + B Outils Maschinen Handels GmbH
           Rottweg 17
            48683 - Ahaus
            Allemagne
            (0049)-2561-9384-71">(0049)-2561-9384-71
            (0049) -2561-9384-36
            info@ab-maschinen.de
            www.ab-maschinen.de

          Profil de commerçant




          A + B Werkzeuge Maschinen Handels GmbH   48683 - Ahaus Rottweg 17 Deutschland
          A + B Werkzeuge Maschinen Handels GmbH

          Rottweg 17



          Contact Trader


            A + B Werkzeuge Maschinen Handels GmbH
           Rottweg 17
            48683 - Ahaus
            Deutschland
            (0049)-2561-9384-71
            (0049)-2561-9384-36
            info@ab-maschinen.de
            www.ab-maschinen.de
            Contact person:

           
          * über 500 Maschinen lagernd -

          Gerne führen wir Ihnen Ihre gewünschte Maschine unter Strom vor *




          Machine category


          · Abkantpresse - hydraulisch · Abkantpresse - mechanisch · Abkantwerkzeuge · Alu-Kreissäge · Aufspanntisch · Ausklinkmaschine · Bandschleifmaschine · Bandsäge · Bandsäge - Vertikal · Behälterdrehvorrichtung · Betonstahlbiegemaschine · Bettfräsmaschine - Universal · Biegemaschine horizontal · Bohr- und Fräsmaschine · Breitband-Schleifmaschine · Bügelsäge · Doppelschleifbock · Dornpresse · Drehmaschine-konventionell-elektronisch · Dreiwalzen - Blechbiegemaschine · Entgratmaschine · Exzenterpresse - Einständer · Flachschleifmaschine · Fräseinrichtung · Fräsmaschine - Universal · Gabelhubwagen - von Hand · Gewindeschneidmaschine · Handspindelpresse · Kaltkreissäge · Kippvorrichtung · Kompressor · Koordinatenbohrmaschine · Krananlage · Kreuztisch · Laserschneidmaschine · Lochstanze · Plasmaschneidegerät · Polierbock · Profilstahlschere · Punktschweißmaschine · Radialbohrmaschine · Reihenbohrmaschine · Ring- Profil- Biegemaschine · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Rollenbock · Sandstrahlanlage · Scherenhubtisch · Schnellradialbohrmaschine · Schraubstock · Schubladenschrank · Schweißanlage · Schweißdrehtisch · Schweißrauchabsaugung · Schwenkbiegemaschine · Sickenmaschine · Säulenbohrmaschine · Säulenschwenkkran · Tafelschere - hydraulisch · Tafelschere - mechanisch · Tischbohrmaschine · Unterstellbock · Vakuum-Lifter · Vierwalzen - Blechbiegemaschine · Werkbänke · Werkstattpresse - hydraulisch · Zubehör ·