René Reiser Grafische Maschinen - Stockist for used machines

weight ca. 300 kg︱current intensivity 20 A︱connection voltage 230 Volt︱

---

Plate dimensions 250 x 120 cm︱Daylight opening 400 mm︱total connected load 20 kW︱

---

Electro-hydraulic veneer press with Automatic switching and automatic opening. Pressing area: 250 x 125 cm Pressing pressure: 100 tons Cylinders: 6 pieces max. opening: 40 cm Weight: approx. 3,000 kg - ELKOM combination heating plates with gold anodized coating (Temperature settings can be controlled separately at the top and bottom) - EMERGENCY STOP contact strip under the press table - Cable emergency stop device The machine has been technically tested and is in a ready-to-use condition.

length 517 mm︱width 27 mm︱height 22 mm︱

---

Heidelberg GTO 52 Blanket Bars 4 sets available

connection value 380/400 Volt︱connection frequency 50 Hz︱weight ca. 1.200 kg︱

---

Heidelberg platen OHT with PRACMATIC conversion for imprinting in roll labels (roll to roll) - from roll to roll - Hot air drying

working width 800 mm︱connection value 380/400 Volt︱connection frequency 50 Hz︱

---

- working widht max. 800 mm - Vacuum feeder (YOC unknown) - Laminating station 12.3024/1 (YOC 1984) - Press belt 1100 12.302431 (YOC 1990) Information according to the user manual (no guarantee): Fasson gluing for paper/cardboard up to 2 mm Full gluing for paper/cardboard up to 14 mm with manual feeding Strip gluing for paper/cardboard up to 8 mm with manual feed

connection voltage 230 Volt︱Speed max. 3500 Takte/h︱Paper size max. 230 x 356 mm︱

---

Neopost DS-70 Folding capacity: up to 8 sheets Multiple feed up to 25 sheets ° Load `N go ° Preset counter ° Double sheet control of the feed trays ° Job selection ° Piece counter ° Capacity volume ° Up to 350 documents (80g/sqm) per tray and up to 325 envelopes ° Output values up to 3,500 envelopes per hour ° Single fold ° Wrap fold ° Double parallel fold ° Zigzag fold The Neopost DS-70 is designed for 40,000 envelopes per month. -Note: Machine indicates that service is due!

without specification - - -︱without specification - - -︱without specification - - -︱

---

Stacker; was last used on an MM-ACORO line

connection voltage 230 Volt︱weight 7,2 kg︱Spiral diameter 6-20 mm︱

---

Electric spiralizing machine with manual cutting and bending unit. Only suitable for plastic spirals!

connection voltage 230 Volt︱block thickness 33 mm︱Max. binding width 700 mm︱

---

ENZ ECL 700 Electric RENZ RING WIRE® closing machines Ring Wire Diameter 3/16" - 1 1/2" Division 4:1, 3:1 und 2:1 Binding widht 700 mm Block thickness max. 33 mm - Quick size adjustment for fast wire diameter set up - Integrated ring wire hanging device for comfortable working - Binds up to 340 sheets - Fast and consistent bind cycle from the first to the last document every time - Binds the largest diameter 1 1/2“ (38 mm) RENZ RING WIRE® - Automatic protection safety switch - Parallel adjustment guarantees a perfect bind every time

connection voltage 230 Volt︱drilling capacity diameter max. - mm︱drilling capacity diameter min. - mm︱

---

Nagel 2 spindle paper drilling machine as table model This model is operated with 230V.

Binding format max. 435 x 305 ︱binding thickness 0,1 - 50 mm︱output Stück/h︱

---

- Automatic glue application - Roughening roller PGO Gluing processes: max. 450 pieces/hour Books: max. 180 pieces/hour Roughening: Yes, with PGO Binding thickness min./max.: 0.1 - 50 mm Binding format max.: 435 x 305 mm Thickness of the binding material max.: 400 g/sqm Connection value: 220-240 min./max. 50Hz

Capacity 1900 Watt︱Temperature Dryer 45 °C︱volt 230 V︱

---

Clunz & Jensen C85 plate cleaning unit Online version plate width: 230 - 850 mm Plate length: 300 - 1100 mm Plate thickness: 0.15 - 0.30 mm

web widht 310 mm︱printing lenght 300 mm︱printing widht 310 mm︱connection value 230 Volt︱

---

Enables precise imprinting in prefabricated roll labels. - Flexo printing unit - Electronic infeed control - Longitudinal cutter (razor blade cut) - Job storage Web widht max.: 315 mm Printing lenght max. 300 mm Printing widht max.: 310 mm unwind and rewind Roll diameter max.: 400 mm Shafts diameter: 76 mm Longitudinal cutter, cutting width min.: 16 mm Output/Speed: 30 m / min.

web widht 310 mm︱printing lenght 300 mm︱printing widht 310 mm︱connection value 230 Volt︱

---

Enables precise imprinting in prefabricated roll labels. - Flexo printing unit - UV-Drying - Electronic infeed control - Longitudinal cutter (razor blade cut) - Job storage Web widht max.: 315 mm Printing lenght max. 300 mm Printing widht max.: 310 mm unwind and rewind Roll diameter max.: 400 mm Shafts diameter: 76 mm Longitudinal cutter, cutting width min.: 16 mm Output/Speed: 30 m / min.

Resulotion 600 x 4.800 dpi︱print format max. 364 x 660 mm︱print size min. 178 x 178 mm︱

---

iGen 4 XXL The machine was under a maintenance contract until the end. It has a total of approx. 21 million prints. The machine's counter had to be replaced due to a defect. This was replaced at approx. 19 million prints during the maintenance contract and currently shows approx. 2 million.

weight max. 500 kg︱Transport surface ca. 120 x 80 cm︱weight - kg︱

---

A total of 8 trolleys are for sale (price refers to one trolley!) Size of the transport surface approx. 120 x 80 cm Maximum load capacity: 500 kg