Grinding machines

Sanding belt width 75 mm︱Sanding belt length 2000 mm︱Speed 2800 RPM︱Power 3 kW︱Machine weight 75 kg︱

---

Grinding unit adjustable in degrees 3 x 380 V

width of the strips 150 mm︱band length 2000 mm︱band speed 30 m/min︱grinding range 150 x 540 mm︱voltage 400 V / 50 Hz︱total power requirement 3 kW︱weight of the machine ca. 110 Kg︱dimensions of the machine ca. 1x0,5x1 m︱

---

Art.-No.16680

width of the strips 75 mm︱band length 2000 mm︱band speed 37 m/min︱total power requirement 3 kW︱weight of the machine ca. 110 Kg︱dimensions of the machine ca. 1x0,5x1 m︱

---

width of the strips 75 mm︱band length 2000 mm︱band speed 37 m/s︱contact disk dimensions 250 x 75 mm︱CE-Certificate ︱total power requirement 3,5 kW︱weight of the machine ca. 95 kg︱dimensions 1000 x 700 mm︱

---

width of the strips mm︱band length mm︱band speed m/min︱total power requirement kW︱weight of the machine ca. t︱required space m︱

---

abrasive belt measures: 150 x 2000 mm
belt speed: ca. 35 m/s
engine: 400 V, 4 kW
space needed: 1050 x 650 x 1120 mm
weight: ca. 100 kg
Piabf

Sanding belt width 600 mm︱Sanding belt length 1900 mm︱CNC brand - ︱

---

Belt sanding installation CNC controlled wet sander for deburring and finishing

Sanding belt width 900 mm︱Sanding belt length 1900 mm︱CNC brand - ︱

---

Belt sanding installation CNC controlled wet sander for deburring and finishing. Includes: Air knife dryer, automatic sanding track tracking, edge breaking and horizontal and vertical deburring. Table opening: 1 - 80 mm Throughput speed: 1 - 10 m / min Diameter contact roller: 280 mm ø

width of the strips 900 mm︱band length 1900 mm︱workpiece length 3000 mm︱work piece width 800 mm︱plate thickness max. 20 (bei 500x500) mm︱control E700 ︱total power requirement 48 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 4,5 x 4 m︱

---

General Overhauled motor + impeller CNC-controlled throughfeed grinding and deburring machine + trelock Discus with wide belt for steel, stainless steel, aluminium, aluminium, brass, copper (laser parts, water jet parts) Burr removal, pre-grinding and finishing The parts are ground wet, but come out dry at the end. The vacuum table prevents the parts from slipping and ensures a high throughput rate. throughput rate. Various accessories for sanding belts etc. Transport dimensions L - W - H 5 x 1.8 x 2.5m

width of the strips 75 mm︱band length 2000 mm︱band speed 30 m/sec︱motor speed 2800 U/min︱Dust suction hood 80 mm︱total power requirement 3 kW︱weight of the machine ca. 90 kg︱dimensions of the machine ca. m︱Electric 400 Volt ︱CE signed ︱

---

Freestanding belt sander with the following features: Contact roller diameter 200 mm, Surface grinding surface covered with graphite – suitable for deburring work, Belt drive via a balanced aluminum drive roller, Rubber-coated, spiral-grooved and balanced contact roller made of aluminum, Belt tension via spindle drive, Belt run adjustable via drive roller, Changing the belt by swinging away or dismantling the spark boxes, Stable support table 100 c 605 mm on the contact roller, Spark box on the surface grinding surface and contact roller, chip container under the contact roller, Extremely powerful motor for heavy use, Powerful and low-vibration three-phase motor, Motor suitable for continuous operation, Large bearings guarantee smooth running with low noise, There is a suction nozzle in the rear area of the machine, Stable base cabinet on four rubberized feet. Machine dealer with own stock of 1600 m².

Sanding belt width 100 mm︱Sanding belt length - mm︱Speed - RPM︱Machine weight 235 kg︱speeds: 380V ︱

---

Brand Almi Type AL 100 Year of make 1997 Machine weight 235 kg Pipe Grinding Machine Sanding belt width 100 mm 380V Pipe diameter: 38/40/55 mm

920229 ︱grinding band dimension 75 mm x 2000 mm︱wheel dimensions 250 mm︱weight 90 kg︱volt 380 V︱

---

Sanding belt width 1.300 mm︱Sanding belt length - mm︱Speed - RPM︱Machine weight - kg︱speeds: 380V ︱engine output 22 kW︱Number of sanding units 2 st.︱roll diameter 270 mm ø︱

---

Brand Sandingmaster Type SCSB2-1300 Year of make 1989 Belt sanding installation Sanding belt width 1.300 mm Number of sanding units 2 Standard roll 270 mm ø Engine power 22 kW Grinding unit electrically adjustable in height 380V

width of the strips 100 mm︱weight 22 kg︱ . ︱with stonegrinder - for example for drills . ︱

---

Sanding belt width 80 mm︱Sanding belt length 2600 mm︱Speed 1440 / 2800 RPM︱

---

width of the strips 150 mm︱band length 2000 mm︱band speed 30 - 34 m/sec︱total power requirement 4 kW︱weight of the machine ca. 100 Kg︱dimensions of the machine ca. 1,2 x 0,5 x 0,85 m︱

---

width of the strips 100 mm︱band length 1220 mm︱band speed 1140 m/min.︱ 0,62 x 0,4 x 0,35 cm︱total power requirement 1,5 kW︱weight of the machine ca. 0,04 t︱dimensions 0,97 x 0,67 x 0,37 m︱

---

This machine can also be mounted without a base. Therefore it is suitable as a table belt sander. Base is included. Connection voltage 230 volts.

width of the strips 75 mm︱band length 2000 mm︱band speed 30 m/sec︱total power requirement 3 kW︱weight of the machine ca. 70 t︱dimensions of the machine ca. 1,2 x 0,5 x 0,75 m︱

---

Belt sander with - Contact disc: 600 x 75 mm

width of the strips 75 mm︱band length 2000 mm︱band speed 37 m/sec︱total power requirement 3 kW︱weight of the machine ca. 0,105 t︱dimensions of the machine ca. 1,2 x 0,5 x 1,0 m︱

---

Belt sander with - Contact disc: 200 x 75 mm - Surface grinding table width 75 mm throughout.

width of the strips 150 mm︱band length 2000 mm︱band speed 33 m/sec︱total power requirement 4 kW︱weight of the machine ca. 100 t︱dimensions of the machine ca. 1,2 x 0,5 x 0,85 m︱

---

Belt sander with - Contact disc: 600 x 150 mm

width of the strips 75 mm︱band length 2000 mm︱band speed 30 - 34 m/sec︱total power requirement 4,1 HP︱weight of the machine ca. 75 Kg︱dimensions of the machine ca. 1,2 x 0,5 x 0,85 m︱

---

Industrial floor belt sander with the following advantages: - Danish top quality - Separate emergency stop - Motor brake - Reliable - Simple and practical operation - Simple adjustment - Easy and quick sanding belt change without tools - 5 year guarantee on the motor - Optimum safety

width of the strips 50 mm︱band length 940 mm︱band speed 3 - 22 m/min︱turning speeds 1450 U/min︱tube diameter 16 - 114 mm︱radius 180 °︱total power requirement 4,75 kW︱weight of the machine ca. 265 kg.︱range L-W-H 1.000x750x1.300 mm︱

---

Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity

width of the strips 75 mm︱band length 2.000 mm︱band speed 33 m/sec︱grinding width 75 x 430 mm︱total power requirement 4,0 kW︱weight 90 kg︱

---

width of the strips 150 mm︱band length 2000 mm︱band speed 34,0 mm/sek︱grinding width 530 Plantisch mm︱table height 475 - 1240 mm︱total power requirement 3,0 / 4,0 kW︱weight of the machine ca. 115 kg︱range L-W-H mm︱

---

Furnishing : - integrated suction - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful motor 4.0 kW - suction nozzle ** including: integrated suction **

width of the strips 75 mm︱band length 2000 mm︱band speed 34,0 mm/sek︱grinding width 530 Plantisch mm︱table height 475 - 1240 mm︱total power requirement 3,0 / 4,0 kW︱weight of the machine ca. 100 kg︱range L-W-H 500 x 1010 x 1000 mm︱

---

Description: The belt sander models TAS 75 and 150 are powerful Quality machines, built according to the strictest environmental and Safety regulations. The belt sanders are standard with motor brake, adjustable working height, eye protection, Angle stop and motor protection switch with zero voltage release built. The low-noise machine with CE mark is suitable ideal for grinding all metals. Furnishing: - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful engine 3.6 kW - suction nozzle ** including: integrated suction **